Likes
Comments
Share
Tings are all over since my last update i moved most plants to flower but all the mac strains with the exception of 1 were still vegging as u can see gonna let the veg another tthree weeks before flipping them and the plant u see in flower vary the orange diesels range from finishing soon to jus begging flower the macalicious GG power plant clones and dqar clones are jus beginning to show pistils overall tho everything except for the guava looks good
Likes
22
Share
@EhJay
Follow
Invested in Green Planet 1 Part Nutrient System. Going to see how it finishes my buds in these last few weeks, also will use it to start my next girl. D60 - There are some amber Trichomes, but on the part of the leaves that will be cut off when I manicure, going to give it another week at most to ripen more. End of the week - Flushing down to 150ppm and hopping the buds put on a bit more size in this last upcoming week. Side note, I should have put more space between the bud sites, they are too compact and the bud sites near the middle are not able to push up through the canopy, which is limiting its growth.
Likes
10
Share
@Lazuli
Follow
Grew in freezing temperatures my tent was barely 16 celcius,
Likes
14
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 ATTENTION GROWERS!!!! BEWARE OF A SCAM COMPANY.... GREEN BUZZ LIQUIDS WILL SAY THEY WILL SEND FREE FERTILIZER BUT THEY MAKE YOU PAY THE SHIPPING WITHOUT TELLING YOU AND THE AVERAGE SHIPPING PRICE IS $100. AND THEY WILL GET ANGRY AND RUDE. THEY TOLD ME TO SUCK IT UP AND BITE THE APPLE🤬🤬 AND THEY TELL ME THIS RUDE BS AFTER THEY TOLD ME I NEVER EVER HAVE TO BUY OR WORRY ABOUT FERTILIZER EVER AGAIN. THEY ARE A RUDE, LYING GARBAGE COMPANY 🗑️ POOR QUALITY NUTRIENTS WITH VERY POOR AND RUDE CUSTOMER SERVICE AND NOT WORTH THE PRICE FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
2
Share
The nuggets are very sticky and compact, they are frosty as hell and the aroma is very strong already. I loved this strain. She's such an amazing autoflowering strain. Very powerful.
Processing
Likes
17
Share
Hey guys idk what’s going on my autos it seems as if the Gelato and Zkittlez has just stop growing completely I mean there’s no change at all the Zkittlez Og is starting to fill in forming nice little buds but my other autos seems like they had stop completely I know the lifespan on the Gelato is 76-80 days from seed to harvest The Zkittlez lifespan said the same 76-80 days from seed to harvest Zkittlez Og lifespan is 80-90 days from seed to harvest And I know I’m for sure March 9th marked the 60th day on all autos and I know I stress the hell out of them overwatered etc but it looks as if I might only have one plant to successfully make it yet this is my first grow and why I choose to do autos first to give me a little insight on what I’m doing but I’m going to let these girls go for a full 90 days before I decide to trash em and focus purely on my clone grows
Likes
6
Share
Week 9 for GMO 8 by atlasseed The indoor smaller plant is really starting to bulk up on the flower size for sure seems like maybe it has another week maybe 2 before being done. While the other plant is now outdoors because i ran out of room indoors & the bud on the outdoor one looks completely different likely because of the 40+ degrees sun outdoors ATM but doesn't have any burn leaves so that's great. Actually looking forward to seeing how she smokes... maybe she gets ran again in a few weeks? 😎
Likes
25
Share
Transplanted the girls into 1 gallon pots and feed them some compost tea I brewed up. They seem to be taken it well no issues or signs of stress so I’m happy for now. Also foilar sprayed some neem oil to prevent gnats Stay tuned the girls are growing great
Likes
3
Share
@Xabii
Follow
Had to do a root wash, again, also cut some really bad roots of, also saw lots of new healthy root growths since last week, upping ORP and wash last week seemed to have helped. Overall still very unhappy but that is on me, learned that prepping a plant in DWC and then transplant it to NFT is not a good idea, better do it as usual directly in NFT so that the roots follow the stream better, usually at this time there would be at least 3x the amount of roots. Also switched back to the 10cm diameter tube, will stick with that one from now on, very good experiences in the past and this one does not, maybe RH does not rise enough in a 16cm diameter tube. Also changed the light cycle to 18/6 from 24/0, in the timelapse I see phases where the leafs droop slightly and come back, kind of like the night cycle but less, seems to me like the plant wants to go to "sleep" even tough it was raised in 24/0 and I have good experiences with 18/6. Values are average of the day. DATE - EC(us/cm) 20250430 1952 20250501 1649 20250502 1722 20250503 1735 20250504 1719 20250505 1750 20250506 1796 DATE - PH 20250430 6.03 20250501 6.24 20250502 6.27 20250503 6.24 20250504 6.21 20250505 6.15 20250506 6.13 DATE - ORP (mV) 20250430 259 20250501 248 20250502 225 20250503 233 20250504 222 20250505 235 20250506 307 DATE - °C - RH% (Tent Temp/RH) 20250430 25.9 42 20250501 25.4 47 20250502 26.6 48 20250503 24.2 51 20250504 23.7 46 20250505 24.5 45 20250506 24.0 47 DATE - °C (Reservoir) 20250430 20.4 20250501 20.4 20250502 21.7 20250503 21.1 20250504 19.5 20250505 19.3 20250506 19.6 DATE - CF 20250430 19.52 20250501 16.49 20250502 17.22 20250503 17.35 20250504 17.19 20250505 17.50 20250506 17.96
Processing
Likes
17
Share
Growing slowly, growing organic. Lights are still on 12/12 due to my first grow that's still finishing up can't wait to switch the light schedule to 18/6 to see the growth
Likes
19
Share
This week, you'll find the HARVEST of Blueberry Crumble Autoflowering #2. If the first plant already gave us an idea of ​​the great quality of this strain, the second one gave us an excellent harvest of equally high quality. The plant has a bushy appearance and was trained with a single topping at the 4th internode, without mainfolding, but leaving two more internodes below with their branches and offshoots. I then trimmed everything that seemed to be too low and turning light green from too little light, and here we have a great, resinous harvest, full of dense, succulent flowers. Pot and Soil - This plant was grown in a 20-liter pot with Plagron's BiloLight Mix organic soil. Lighting - The Zamnesia Phytonaut 480W LED lamp, used from mid-flowering onwards, allowed fruiting. We achieved a PPFD (photosynthetically active photon flux density) between 800 and 1200 μmol/m²/s, with a cycle of 24 hours, then 23 hours, then 20 hours, and finally 18 hours. Z https://www.zamnesia.io/it/14526-lampada-led-per-coltivazione-phytonaut-480.html (National link if Google doesn't work) Growing system: Zamnesia Ecosystem, fan, extractor, and grow box, all made by Zamnesia. Trichhomes: We let the plant mature longer than usual to bring out its indica qualities; this time, there are plenty of amber trichomes and beautiful red-tipped trichomes. Feeder: Grown with Plagron Official, a 100% organic base fertilizer, and all recommended additives. Visit www.plagron.com for grow cycle calculations, product selection, and general information. All nutrients are available on the Zamnesia website. Also check out the live substrate and the fantastic new Zammi product line. You can find this excellent strain here: https://www.zamnesia.io/en/11102-blueberry-crumble-auto-zamnesia-seeds-feminized.html (Google search if the link doesn't work; it's a national link) You can find this excellent strain here: https://www.zamnesia.io/en/11102-blueberry-crumble-auto-zamnesia-seeds-feminized.html (Google search if the link doesn't work; it's a national link) Terpene // Caryophyllene, Myrcene, Limonene Parents // Blueberry x Purple Panty Dropper x Ruderalis Genetics // 80% Indica / 20% Sativa THC // 22% CBD // 0-1% Flowering Time // Autoflowering Flowering Time // 9-10 weeks from seed to harvest Taste / Aroma Sweet, Berry, Floral, Herbal, Creamy Effect: Relaxing, Euphoric, Happy, Balanced, Calming Zamnesia Description - Blueberry Crumble Auto is an irresistible temptation for growers and consumers alike: a compact, fast-growing, and flavor-packed strain that perfectly captures the comforting essence of its name. Derived from a cross between Blueberry, Purple Panty Dropper, and ruderalis genetics, this 80% indica-dominant hybrid offers a delicious blend of dessert-like sweetness and relaxing effects. From seed to harvest, Blueberry Crumble Auto takes just 9–10 weeks, producing up to 350 g/m² indoors and up to 150 g/plant outdoors. Plants remain short and sturdy (around 100–120 cm), ideal for discreet grows or small spaces. Despite its compact stature, Blueberry Crumble Auto produces dense, resinous buds that exude an inviting aroma of sweet berry pastries, floral notes, and a creamy, herbal finish. With THC levels around 22%, Blueberry Crumble Auto offers a balanced yet potent effect. Expect a euphoric onset that gently fades into deep physical relaxation, perfect for unwinding alone or with friends. The terpene profile is rich in myrcene, bisabolol, caryophyllene, limonene, and humulene, which add complexity to the aroma. If you're looking for a fast, flavorful, and energizing autoindica, Blueberry Crumble Auto by Zamnesia Seeds is the ideal solution: from sweet aromas to relaxing sensations, all wrapped up in an easy-to-grow strain. "The best that nature has to offer" www.zamnesia.com
Likes
2
Share
@mojogrow
Follow
2º week crystal 1º week euphoria (she will be in veg period until dicember)
Processing
Likes
11
Share
going fine try trim away most fan leaves. Last day week 8. 2 more days with Nutrients then i am going last time with just Nordic spring water 💯🙏💪💪
Likes
18
Share
June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.
Likes
24
Share
@MaxMo8
Follow
Hello my friends . The last week before harvest, I gave her chlorinated water. And sorry for not leaving weekly notes due to lack of time, thank you all for my support. I wish you happy days😘🙏👌🙋‍♂️
Likes
5
Share
New addition to the family donated kindly by @dropseedsnotbombs, just managed to squeeze this girl in hopefully she takes a liking to her new habitat an 19hrs light schedule 😃🌲🙏
Likes
8
Share
1° Semana- Aeroponía - Crecimiento lento, pero luego mejorando las condiciones de crecimiento para las raíces, ya que al inicio la luz traspasaba a través de la arlita y la tapa del tarro, afectando el crecimiento, por lo que en el día 4 se realiza el pintado con pintura para evitar el crecimiento de patógenos. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 1st Week- Aeroponics - Slow growth, but then improving the growth conditions for the roots, since at the beginning the light passed through the clay and the lid of the bucket, affecting growth, so on day 4 I painted it to prevent the growth of pathogens.
Likes
2
Share
Week 6 from seed. No pollen on this run. I think the silver is old so better luck next time.
Likes
5
Share
Here we grow! These are clones of Mandarin Cookies, rooted in peat plugs, under low light T5 Sunblaster 24w, inside a dome, keeping humidity levels high.
Likes
7
Share
The girls recovered the same day as the topping last week. They have more than doubled in height and gain nodes quickly. Accidentally was giving wrong dose of nutes last week and corrected it this week. These strains are very hardy so far
Likes
13
Share
I liked growing this strain very much, it was very easy growing and everything worked out nice, I like the structure of this plant the node spaces are not so big and everything filled in nicely when she was flowering. The fastbuds zkittelz has giant huge buds they where one of the biggest buds i grow on auto's. It was a plesure to see em getting bigger and bigger. I found that the plant was very forgiving as in mistakes you make, so i recomend this to every grower out there. They only thing is it takes a little bit longer then they advertise. But then again maybe the company's are giving you the most early time you can harvest if you do everything as perfect as you can. I think you cannot do much more perfect as you have a plant that grow as big as this one. So that being said i think if you let em go for 2 weeks more then in the last 2 weeks the buds are really fattening up and they double in size sometimes. In the end i had some foxtails on my buds, not all of them but still a few, I was thinking about it, and maybe it is because i pushed her a little bit too much in the end with the nutrients, She was not that close to the lights i think. Or maybe it is also a little bit in the strain. I definitely grow this strain again. (no rights to the music in the video)