She’s packing on weight starting to get bigger frosty nugs and she smells absolutely amazing

This is more like the end of week 3. I will be topping tomorrow.

Shes Starting to smell reallllly good! I shouldn't have too much larf if i had more room to spread her out in early flower she would be producing alot more.

OVERALL: ~ Very happy with the grow, I really dialled everything in well this run. ~ She grew super fast, I put it down to the constant oxygenation of the rootzone along with consistent and constantly optimized light DLI and leaf to air temp variance. The extra Co2 helped push the plant to its limit in terms of heat, allowing it to push its hardest. ~ The lack of HST and Defoliation I feel let it finish faster due to lack of stress and stunting. The faster finishing time along with the big yield and efficient MarsHydro light, it hugely reduced my electricity costs per gram and freed up space much sooner for the next plant. ~ Turned into a very dense bush of buds, there is even smokable dense buds at the base of the plant due to the under canopy lighting (Not as dense as top canopy buds but still decent) ~ Ran a thin line between stressing the plant and letting it flourish. The buds came out big and very dense, also it's hard to see on camera but they're very frosty too (Prob from UVB) YIELD: ~ 145g (dry) in just 9 weeks from seed. ~ 753g (Wet) ~ 0.91g/watt GENETICS: ~ MSNL - Gorilla Glue Auto ~ my favorite strain, as you can tell by my username! STRAIN REVIEW: ~ Heavy hitter, like an indica but has some of that "feel it in your face" sensation of a strong sativa. Not as heavy or as strong as other GG#4's I have smoked, which would make me question the genetics used to produce the auto version. I will wait till after a cure and judge it again. TRAINING: ~ No defoliation or HST (Bar last week for pics) ~ A little LST and leaf tucking but largely just left the plant alone to do its thing. I felt chopping healthy parts off the plant would slow the plant down and leave it with less chlorophyll to photosynthesize the light. ~ I did prune by lightly plucking dead leaves away, when the plant was ready to let them go easily. DRYING ~ 20/21'C 50% RH with air circulation. ~ Homemade Drybox made using: 2 x Bankers Boxes ~ 2 x USB Desk Fans ~ 1 x Carbon Filter ~ 6 x Clothes Hangers UPDATE: Day 5 after Harvest: ~ Fast dried some small batches, as we couldn't wait to sample. ~ Chopped off branches as some are down to 12% moisture whilst bigger buds are up at 18%. Moving to paper bag for couple of days to even moisture out then transferring to jars CURING: ~Curing in jars 3/4 full. ~ Dark closet/18'C/50% RH ~ Jars burped once Hygro passes 65% and sealed when it drops to 58%. ~ Stabilised it at 62% and after 2 weeks I'll drop it some more and stabilise it at 58% to bring out more of the flavour. ~Sitting in jars with Boveda 62% at this stage. ~ Already tastes and feels great. WATER: ~ Condensed (Starting at 40ppm) ~ Disinfected prior to adding nutrients etc. (Using COOSPIDER UVC - 253nm & 187nm bulb) CLIMATE: ~ Ambient Air Temp = 29'C ~ 28'C LST ~ Leaf to air temp variance of between 1'C ~ Night Temp = 22/23'C ~ Day/Night temp differential 6-7'C ~ Under Canopy Temp: 26'C (Day) ~ 21'C (Night) ~ Relative Humidity = 50-60%RH (Avg. 55%RH) ~ VPD = 1.45kPa (Avg.) ~ Co2 ranges from 900ppm to 1500ppm (Avg. 1200ppm) AIR PRESSURE: ~ Ambient Air Pressure (outside tent) = Mean Avg. 1010 mbars (101 Kilopascals) ~ Actual Air Pressure (inside tent) = Mean Avg. 1005 mbars (100.5 Kilopascals) ~ Air Pressure Differential = up to 0.5 kPa range between inside & outside LIGHT: ~ UVB (High intensity @ 45cm) ~ 2 hours daily mid light cycle. ~ Warm White 3000K/White 5000k/Far Red (660nm) ~ At plant canopy = PPFD 900-1000umols/s/m2 ~ Lux 45,000-55,000 ~ Daily Light Integral 55-65 ~ Under canopy lighting ~ Blue (460nm)/ Red (630nm) NUTRIENTS: ~ Mostly Advanced Nutrients (For base nutrients and most additives, as only company I could find scientific data on) ~ Canna (For Calmag Agent and Cannazym) ~ Plant Success (Great White Mycorrhizae) ADDITIONAL GROW TECHNIQUES: INFECTION PREVENTION & CONTROL: Infection control practices i.e ~ PPE, Alcohol Hand wash ~ Gray room outside tent, ~ Carbon filter ~ HEPA filter ~ Plasma Ionizer ~ Inline UV-C germicidal bulb ~ Also using an additional higher powered COOSPIDER (UVC) 253nm & 187nm bulb, to disinfect the gray room outside of the tent once a week for 30 mins. ~ Ozone (o3) gas that is produced using the COOSPIDER, is then directed into the tent to further control any unwanted pathogens. ~ Ed Rosenthal (Zero Tolerance organic pesticide), sprayed once a week as preventative measure. On hand for heavier use (Once every 3 days before lights out for 15 days) in the case of an outbreak (No outbreaks yet, due to aforementioned preventative measures)

Hello Diary, The second week of flowering is over and as you can see from the photos, Medusa is developing incredibly fast. The flowers are filling up really nicely, taking on an already beautiful scent that overwhelms me when I open the Farm's door. All in all, both plants are beautiful, although they differ in structure, the flowers are almost identical on both plants. It's unbelievable to me that it's only the fifth week since the beginning of the vegetation, they are really developing very quickly. They stagnated in height growth, only a few centimeters this week, so they reached their maximum height of about 50 cm. This requires more frequent watering, so I increased the amount when watering and the time interval between each watering decreased. The conditions are good, the temperature is around 25 degrees while the humidity is around 45%. Here's what it looked like last week. 22/02/2023. - Day 29. Watering. I prepared 8 liters of water, lowered the pH. at 6.0 and I watered both plants evenly with that amount. 26/02/2023. - Day 33. Watering. This time I added Bigger Flowers and Thicker Flowers from the Bio Flowering Booster palette. I also removed a couple of leaves at the very bottom of the plant to make watering easier. 28/02/2023. - Day 35. Photographing and measuring plants. Medusa F1 #1 - 50 cm Medusa F1 #2 - 47 cm That's all for this week, see you soon.

Used dragon force now for 2 feedings then start flushing ! There almost there

The week went well, the plant is developing, but it seemed to me that slowly. In the middle of the week, before going to bed, it wilted, the next day it became cheerful again, now it always fades before turning off the lamp, is this normal ? The plant began to drink more, increased the amount of fertilizer, PM brought to 1010.I keep the PH from 6 to 6.5, I water 2.5 liters of water every 2 days, as the soil dries out.

Una vez pasados los dias huele bién, sabe bién y buen efecto. Matices y aromas Terrosos , café y a cítricos. Fácil de cultivar.

# Day 29 Feed 30 min before light on with 3.8 liters of AACT based on: - 5 liters water - 5 ml molasse of sugar can - 125 grams vermicompost - 12.5 grams nettle - 12.5 grams horsetail - 5 grams growing guano - 5 grams fish hydrolyzate - 5 grams epson salt # Day 30 She looks happy and praying. # Day 31 Setup trellis, I wanted to go for PVC but ended up that way. # Day 33 Stopped backing soda foliage spray application yesterday, it really messed with her, at least I don't see any more signs of powdery mildew in tent. Feed with bokashi tea (2L/20ml) Preventive foliage spray with organic water soluble neem oil 2%, she shine 😶

Havrested a bit before just becouse i needed to have a harvest before the full one

Started some very mild LST... I know I'm probably a worry wart but these are my first time babies hahaha seems more even though

Another lady looking excellent on her second week of life, she's a beautiful Healthy little seedling. I'm so excited to watch her develop to her fullest potential. Let's get to work and see how she performs! 💚💎👨‍🌾❤️✌️

Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 17/02/2020 - Fed her 1.5l of 6.4PH water with 0,2ml of each: Cal Mag (Atami), Grow, Bloom and Max, and 0,5ml of each: Heaven, Alga-mic and Vera, noticed some run off, I use about 1/4 of the nutrient dosage on the chart, to achieve about 100/150PPM (500 scale). She's starting to smell like smelly feet. 22/02/2020 - Last feed, gave her 1.5l of 6.5PH water with 0,2ml of each: Cal Mag (Atami), Grow, Bloom and Max, and 0,5ml of each: Heaven, Alga-mic and Vera, noticed some run off, I use about 1/4 of the nutrient dosage on the chart, to achieve about 100/150PPM (500 scale).

Now starts the waiting game😑

2024-05-09 Directly after the Photoshoot, i topped them. they had a super progress and you can watch them growing big steps every day. All will started Indoors under SANlight Flex 25, and move Outdoors. Only one Plant stays indoors, to see the performance under best Conditions because my Outdoor Garden is hard^^ So i started with letting them soak, and then the seeds will move under a humid Kitchensponge unil i see a sweet Taproot. then they will go into the Final Pot, filled with lovely TerraPreta mj mix the grow will be supported with Biotabs fertiliser Breeder Information Fatso GMO F1 Auto is a feminised hybrid strain that is the result of crossing two autoflowering strains, viz. Fatso Auto and Cotton Candy Auto. This Cali-derived, slightly sativa-leaning, easy to cultivate strain will please growers with its big yield, solid THC content and its sweet, candy and fuel palate. Fatso GMO F1 Auto will grow well both indoors and outdoors. It has an above-average resistance to mould but will still benefit from good ventilation, especially where humidity levels are quite high. Resistance to plant pests and other pathogens is excellent. While plants will remain quite short at around 100cm or less indoors, they can grow a little taller, reaching a height of 130cm, outdoors in open ground. The entire cycle is completed in a maximum of 75 days from germination through to harvest and although yields are said to be average this is still pretty impressive for an autoflowering strain. The combination of high resin production and high terpene levels make Fatso GMO F1 Auto a very good strain from which to make cannabis extracts. The terpene profile is sweet and funky with savoury scents of Skunk with pine and floral notes. The taste is like sweet candy with hints of fuel. THC production is high, reaching 24% while CBD is low. The effect is uplifting and well-balanced.

23.08 Girls are stretching and creating budsites. Never had 16 of them in 5x5 and it is a bit too much. I have trouble controlling humidity. It’s already apparent they are taking their time and that it is more than 8 week strain. Officially it should be done in around 10 weeks.

Hi all.. Lady's are very happy..still stretching a bit..looks like the push is almost over. Very faint sweet smell starting to come form them. Im going to do another light defoliation soon. Humidity is a bit high and i want to avoid WPM. Sorry for all the wierd couler photos , i try take picks as the lights come on.. I will upload some more picks on friday. Other then that..Perfect! 😁 420 for life.

It's week 8 of flower. The buds are getting fatter and the aroma is more intense now. I can't wait to see the finished flowers. The buds still have a lot of white pistols, so I hope that the colas will get even fatter. I hope to have a good harvest in a couple of weeks.

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Umstände.

Always R.O water