So far this week I am starting to germinate 4 seeds. 2 are blue dream matic and the other 2 are pineapple Express auto from Fast Bud genetics. I also did a leak test on my diy undercurrent rdwc set up. I should have seedlings by the end of the week. Update 1. Both blue dream have 1/2inch tap roots and 1 pineapple Express has a 1/4 inch tap root. The other one has just opened up. Hopefully that doesnt mean they are going to be slow growers. Update 2. Sorry I dont have any more pictures this week. I dropped my phone and now my camera doesn't work. The 2 blue dream matic are about an inch tall and in rock wool. The 2 pineapple Express auto have not sprouted yet. The tap roots are slowly getting longer. I think it may be the temp of the seed starter. I purchased a seedling mat and have them on it. So hopefully I will have 2 more sprouts. I also have been fighting with fixing the leaks in the buckets. So I bought some flex seal spray and it worked!

Welcome to my Epic Buzz Diary sponsored my Anesia Seeds. Bit of lag in a few of my diaries. Apologise to the followers. Swapped atm. Veg Days 4-23 Days 8-28 3 weeks Plant grew really well. Really fast out the gate. Done a repeat of the hard Defoliation method used in my Ztrawberry to see can I replicate that even strong node growth. This was the 1st of very high stress defoliations that will be done. Y, well I wanna see how hardy these genes are. And how they respond to various stress factors. So, my 1st hard defol was done at the end of wk 3. I removed all the fan leafs and left the small nodes to fend for themselves in the hopes it would actually push an even node growth, instead of older bigger fan leafs drawing in more energy and therefore making bigger nodes. You may think she is small. But, look at it from the point of them just been nodes and no big ass fan leafs that make your plant look twice the size it really is. So, stripped her bare. And let her run, and oh boy she did. Lovely node growth. Very well defined. Explosive growth from about 5 days into the hard defol she took off like a bat outta hell. Really took off coming into wk 4. Sadly, this is where the good times kinda stop.. Next wk, its all down kill, hit with a serve Sulphur issue. That came on with hrs and looked like a wk old issue. The response time from growing in co2 is so quick. The plant is finding it hard to show symptoms like a normal grow, where you'd see a gradual illness occur. But, this way. You really have to be on the ball. Its definitely not something I'd recommend doing until you get a few grows under you. The slightest oversight will throw her into a tail spin. Feel free to message me if you're interested in using co2. I'm by far no expert but, I know a fair about of head knowledge and hopefully soon experiences in it also and fixes etc. Methods Will be using my hard defoliation techniques to push this girl to making nice strong nodes, hopefully, that's the idea. Thus far. Its been going to plan. I've achieved a really good solid base, to build heavy buds on. Soon I'll start to tackle some sort of shape. I had to do a repair to a snapped node. Was literally hanging on by a very thin bit. Recovered strong and has set. I might now HST the otherside to counter the energy that this side will have more of now. As when you HST break a stem and it repairs the stem itself hardens up, storing more energy/fluids and helps direct it better up through the full filled nodes, so they're not like straws. So, the broken side will act like it's been HST'ed now. So, only makes sense to do the other side to keep a somewhat even energy distribution Thanks to my followers and sponsors from Anesia Seeds & Spider-Farmer. Without you (my followers/viewers I couldn't do any of this, nor would I be or have all I do without my sponsors. So, a big thank you from GGST. Look forward to seen your work. Either way, thanks for stopping by.

Bon, la végétation est suffisante pour moi alors let's go 12/12 d'ici deux ou trois jours !!

the girl has already matured :) tomorrow will be the crossing and renewal :).

They are doing great including the 1 that got ate she is now the baby of the bunch... The other 1 that had burnt leafs also seem to be growing showing new growth.. And the other 1 is 16 inches she is outgrow everything in tent lol... I love growing cannabis

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Harvest day 60 since the time change to 12/12 hrs. Hey guys :-) Finally the time has come . The lady was harvested. After the trichomes have been checked (70% milky 30% amber) as always, it was left in complete darkness for 48 hours before it was neatly trimmed by hand. After trimming, she was put back in the drying tent on nets. There they are allowed to dry for the next 8-12 days at 62% humidity before they are put into the jar to ferment with 62% boveda packs. After about 4-6 weeks in the jar I will swap the 62% boveda pack for a 58% boveda pack where it can be ready for another 4-6 weeks to enjoy :-). As always, the remains of the leaves are used to make Ice o Lator and oil. Of course, as always, there is a final update during the fermentation process. Until then, I wish you all a lot of fun with this update. Stay healthy 🙏🏻 and let it grow 👍. You can buy this Strain at : https://www.royalqueenseeds.de/feminisierte-hanfsamen/220-pineapple-kush.html Type: Pineapple Kush ☝️🏼 Genetics: Pineapple x O.G. Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: GHSC Powder Feeding Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Gorilla Punch Auto 🦍 🥊: 30.6 - 7.7 = 35 cm +0,5cm Mimosa Cake Auto 🍹🍰: 30.6 - 7.7 = 53,5 cm +1,0cm Nothern Light Auto 🌌🌠: 30.6 - 7.7 = 64cm +1,0cm Woche 8 ist rum und die Buds beginnen zu Reifen und immer dicker anzuschwellen. Alle Trichome sind milchig aber noch keine Bernstein Farbe zu entdecken. In der 9 Woche werde ich die Dünger gabe halbieren und erst spülen wenn ich Bernstein Farbe erblicken so 10% der Rest schön milchig. Würde schätzen maximal noch 14 Tage dann sind sie reif die Gorilla Punsh wahrscheinlich eher ! Oder was sagt ihr Growmies?

5/7 Week 3! This is our first CBD Crack grown in coco and she is showing wonderful color, form, and size for only 14 days up. Very happy with this so far even if the delay does present some issues. She just so pretty! 5/9 She is just exploding, a full inch of height and girth in one day. No hairs yet, increasing nuets tomorrow 20%. 5/10 Nuets increased Raised her base up to get better light, think she has fully acclimated by now. 5/11 She has grown another node and another inch in one day! The reward for what we did yesterday, she wanted more light and nuets. Will leave things as they are for now. 5/12 Just call her "Inch a Day" a that is her growth rate. Training her today, Pony Tailing LST First hairs visible so folding in a light dose of Bloom 5/13 10 inches wow First cycle of pony tailing was productive though she still tacked on over an inch in 24 hrs. Secondary growth tips grew a lot during the process and expect tonight to be even more productive. Node spacing is about one inch so perfect now

We’ve had some nice weather this week. So far so good. I just hope to get her through flowering, as she is supposed to be a very small plant. Other than that the bottom leaves that may be dying I think she should be okay? For now it’s just sticking to water + worm tea & a drop of Black Molasses.

Eine weitere Woche ohne große Mängel und Vorkommnissen die man nicht händeln könnte. Die Luftfeuchtigkeit ist mir ein wenig zu hoch, also müssen Blätter weg. Wenn ich schoneinmal die Schere in der Hand habe, können auch direkt wieder unten ein paar Äste weg. War mir schon klar dass das Netz nicht viel bringen wird bei der stabilen Sorte die ich da hab, aber so crazy unterschiedliche Phänotypen ist schon echt heavy. Äste werden soweit es geht verschoben und Nodien an ihren Platz gebracht sodass diese direkt richtig einwachsen, ohne dass ich noch groß eingreifen muss.

Update 11/04/2022 (Day 57) Hello All! the start of yet another week!! it's been 2 weeks ago since I Flipped to flower but I have a feeling they are really slow in this process. it's only today I really start to see some pistols forming! Since these are my very first Photoperiods i am yet again on unknown territories. Might be that at this stage my TSW2000 just isn't juicy enough. lucky enough I've got a new FC-4800 coming in from Mars hydro. this will have a much better coverage and and some more wattage I might have to do another Lollipopping session once I really see pistols all over the place. The stretch on these girls is crazy at almost an 78CM as of today. I only have +- 80 CM left in my tent and that also means I gotta figure out a way to get my lights up tight against the ceiling and rearrange my extraction fan. 1 plant is kinda on the slow side I accidently topped that one in the early stages and it feels like it never really recovered from that. Having a look at my clones well 4 out of 8 survived and are now starting to develop some nice roots. Thats it for today. hope too see some nice buds forming this week. Update 14/04/2022 (Day 60) Yesterday the new light arrived so I got busy. in order for the new light to be hang as high as possible I had to move the extraction fan outside the tent it now sits on top of the tent. the driver from the light is also placed on top of the tent. I must say this new FC4800 is a very welcoming upgrade it really has a much better coverage in my 4x4 and more wattage :D after the switch I got busy with some scissors to apply a final lollipop session. also transplanted the clones in some bigger pots gotta keep them under the Secret Jardin Tneon 2x55watt lights 6500K till beginning of may than they will be moved to some friends garden.

smoke is really good.strong taste and effect that you feel imideately.some times i catch a good paranoia with this strain.good psy effect. maybe it cause 11/13 light cycle. few hours after smoke good to sleep or eat smth good.not for day smoking.somy buds i stored in vacuum bags they very dense after this

Finally split up the plants. The big auto has the 2x2 shower to herself now and the bathtub is plenty big for the smaller auto and the vegging bag seed/"mutant". Add the bath tub to the list of domestic areas in my home that Mary Jane has claimed :P Removing "grow big" from the nurse mix, despite it being recommended in the nute guide provided by fox farm that came with the trio I've been using, seemed to do wonders for the stunting/Yellowing. Unfortunately the top leaves on the bigger auto wilted seemingly irreparably (except for the middle one, like it's flipping me off for putting it through some rough shit >.<). All the other leaves perked back up and are in the process of uncurling. Thanks for all the answers, you guys. I'm gonna run a flush on these babies tonight or tomorrow. It's been 48 hours since their last watering of 1gal in a 5gal pot, so they should be good to go. Wish me luck!

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 (NEW) STRIVE NUTRIENTS 💪 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

9.30 - I build a little fermenting CO2 generator this week, mostly for shits since I'm not going to seal the tent up. Otherwise things are going as expected. Noticed a really big change in bud structure and how they are densing up. Really enjoying the show and the change in colors and pistil behavior. Got her propped up to increase circulation and get a better idea of when she needs water. 10.1 - Just documenting the bud evolution for fun :) 10.4 - Whatchu guys think of my rescue marijuana plant!? Not bad, huh?! 10.6 - Plant grew some new whites and oranges and buds are bigger 10.7 - changing every day. What a wonderful thing

She is doing excellent pumping her on max nutes and she loves it nice tight internoding spacing smells nice and sweet no issues out of this lassie so far 😊

Week 8 (17-3 to 23-3) 17-3 Temps: 17.4 to 21.9 degrees Humidity: 60% to 72% 18-3 Temps: 17.5 to 22.2 degrees Humidity: 54% to 65% 19-3 Temps: 17.9 to 22.4 degrees Humidity: 52% to 61% Watering: Both 500 ml. EC: 0.4 Watering: Both 1000 ml. EC: 1.4 Defoliated both plants and attached some shoots to the rack. She got really big fan leaves! I also supercropped some branches. 20-3 Temps: 18.2 to 22.8 degrees Humidity: 59% to 69% 21-3 Temps: 18.5 to 23.4 degrees Humidity: 57% to 67% Watering: Both 1000 ml. 22-3 Temps: 19.4 to 24.1 degrees Humidity: 55% to 67% Watering: Both 1000 ml. Set the strength of the light to 50% 23-3 Temps: 19.8 to 24.8 degrees Humidity: 58% to 67% Watering: Both 1000 ml. As you can see, instead of removing the leaves, i tucked down all the leaves to open up the canopy. I will see if i like this method as its the first time i try this. I also attached some more shoots to the rack, its looking nicely spread out now :) The #2 makes my fingers very sticky and smells really strong! I love it!

She’s really swelling up. Buds are all with white tric heads but minimal amber. Going for that 15-20%. Pretty late in flower.