Está semana regamos ligeramente con agua dos días y el sábado 12 empezamos a hacer el té para echarselo lunes de madrugada

Welcome Back!💚 Nach der fünften Blütewoche, ist kein Stretch mehr zu beobachten. Die Blütenbildung entwickelt sich prächtig und es wirkt, als hätte man überall wundervolle Inseln mit richtig schönen Buds. Die Pistillen bilden sich immer stärker aus. Insgesamt hat die Pflanze ein sehr großes und breitgefächertes Wuchsbild und wird insgesamt ziemlich groß. Die Umgebungsgegebenheiten sind insgesamt etwas angepasst worden: ————— 🌞 Temp: 24°C 🌚 Temp: 19°C bis 20°C 💨 RH: 58% VPD: 1,21 kPa👍 😎 PPFD: 830 mqm —————

Very good and pure amnesia smell, clasic, never let you down, Love that clasic amnesia smell coming from this flowers, let's see how se keeps performing during this 4th week!

Fair amount of LST going on in there. They've been bent over and seem to be liking it. Just before pics were taken they were given some phd cal/mag water due to what I Believe was a slight mag def. starting. Ph is still remaining perfect in FFOF ( Big up dolomite ). PPM's coming out have dropped from 2000 to 1000 in one week so I'm gonna keep an eye on that. I'm watering every 3 days right now as well not every day as the drop down made me choose per day. They seem pretty happy though. I have a feeling they're about to explode. Update: I was right they needed a lil cal / mag and in 2 days yellowing has cleared up and they are absolutely exploding almost doubled in size in 2 days. Also two have started to flower.

Marker didn't take well to the mainlining process; as a result, one cola was almost entirely consumed by mold. However, overall, things are looking good. I ended up with a small, resilient plant with a nice aroma of pineapple and Skittles, with hints of gas towards the end. 🍍🌿 Towards drying and curing now! 🌬️🎊

Thursday, July16th. Solocup Challenge 2020. @Silky_smooth asked me to Participate. and well why not Iam always open to new Challenges, And I think It will be challengeing. Never grown in a Solocup Before So Iwas thinking a While wich Strains i should take, And i decided to take good growers and resiliant ones. I´ve chosen 3 Strains , 1 Photoperiod and 2 Automatics "Rock Machine" from Doctor´s Choice I started like always in soaking the Seed I took a Bavarian Beerjug called " a hoibe Maß" , its a 0.5l Jug I am thinking about tthe Drainage Material i should take Claypebbles? Claygranules? Mesh? Perlite=? So Pls tell me what you prefer,,,, thy Friday Seed went under a wet Kitchensponge Saturday Seed cracked, Sunday Seeds were Planted. I took Claypebbles and let them soak and wash them a little then into the Jug and some additional Perlite Filled uo with my Soilmix and " Living Organics" Some drips of water.... done Friday# I forgot to update The seedling shows up... but still in the shell

We will see, we hope... littlest two different ladies in same strain.

Start of week 5... Looking back at the first few weeks of veg, i never imagined that they would thrive this good in week 5 already! (Look back at week 1+2 for horror pictures) Whole of week 4 i worked on my climate control automation. I will keep the set up for atleast a week. 👽👉26/9 Big LST day. I got new supplies to manage the rest of the ladies properly. Topped another one ( 5/6 is topped) Cut just a couple of leaves. The crusty ones that did not receive light and the ones casting shadows over my lovely budsights. 👽👉27/9 Waterday* and recovery 2ml/L Bio heaven + fish mix / 6.4 PH 1.68 ECLetting them recover Humidity a bit higher during night because of watering, turned the temp up to match the VPD. 👽👉28/9 They look content, humidity a bit higher during night because of watering. 👽👉29/9 I am happy how you thrive, but they need some pruning/defoliation as soon as they have recovered from the stress training. 👽👉30/9 Did some defoliation, decided to flip to flower after their recovery. 👽👉1/10 They had a case of empty humidifier, resulting in high vpd for 7hours. Water day* 2.1xml/L Bio heaven + fish mix / 6.2 PH 1.75 EC 👽👉2/10 They look great, healthy and happy! Climate is back on point

Sundae Driver- (Fruity Pebbles x Grape Pie) under the MarsHydro TS3000.

Shes doing really nice and smelling soo good. Buds are really dense and look like they were dipped in sugar. She still has another week or two for sure. We got some bad weather early in week and brought inside for a night followed by several days if sunny weather then had to drag her out to my greenhouse because another round of storms and stinking up the whole house.

The first week of flowering is here, and things are finally looking much better! Both plants have recovered well and are now growing much healthier.🌱 #1 has already started stretching significantly, really picking up speed. It’s exciting to see how quickly it’s developing! Meanwhile. #2 spent about half the week still in vegetation, but towards the end, I finally spotted the first signs of flowering. Now that both are officially in bloom, I’m looking forward to seeing how they continue to develop over the next weeks. On to the next phase! 😊

***Note that I started to count the days when I placed the seeds between paper towels. The seeds were planted 3 days later and sprouted from the ground 2 days after being planted. D80 (13/05/2021): I'm looking at the trichomes every other days. Glue Gelato is starting to show amber on top buds. No amber for Banana Kush and Gelato. This time I will chop them all at the same time so the one I will rely on is the Glue Gelato. As soon as she is ready, I will harvest them all. Banana Kush and Gelato would probably need more, but in term of logistic, I need to harvest all my plants at the same time. D83 (16/05/2021): Not ready yet. I'm checking trichomes closely! 😬 - Light: the lights are at 100% and at 12 inch form the plants. - Temperature: during the day: 24-25C ; during the night: 20C. - Humidity: the humidity is maintain around 46-48% all the time. - Air circulation: There is an oscillating fan on the ground, one fixed fan pointing on top of the canopy and one fixed fan to help cool the lights. - Water: I gave water every other day or when the ground feel dry or the pots feels light. - ***IPM: I never mention it but I'm using nematodes pouch as an integrated pest management. I had trouble with pest in my first grow and I learned from it. That's the only thing I do for pest and of course watching closely and regularly at my plants 😊

Well another week closer to harvest not sure when that will be , could be 2 weeks to 4 weeks all on her. But shes going. Tell next week , happy growing.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 REMO NUTRIENTS 👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Alright growmies 🍁🕺 week 6 of veg - girls are starting to get there Colour back into them now 🙌🏻2 girls have a bit off a potassium def but same strain so could be a sign(worst part about running multiple strains) that will clear up with the next few days. Little update on this weeks progress. Start cloning next, and repot will be on cards 👏🏻 light work 💪🏻

Growth Overview: Vegetative Stage: Auto Critical Orange Punch developed into a thick and bushy plant with vigorous growth. It filled out its space well, creating a dense canopy of healthy, deep green leaves. Flowering Stage: The plant maintained its bushy structure, with buds developing steadily and gaining significant mass. By the time of harvest, the buds were thick and plentiful, displaying a beautiful orange hue typical of this strain. Harvest Details: Timing: Harvested at the peak of maturity, with the trichomes reaching the desired level of cloudiness and amber. Yield: The plant produced a substantial amount of dense, resinous buds, thanks to its bushy nature and strong branching.