Likes
Comments
Share
@Pedrojuan
Follow
Bueno, en el inicio de la fase de floración, hemos cambiado la solución nutritiva con ml x ltr , metí la red scrog y he notado que esta cepa se estresa con facilidad, tras el cambio de agua y nutrientes y la red quedaron full stress, poverine... Empiezan el fotoperiodo con mucho olor a vegetal y esto me hace temer que tendrán mucho olor los futuros cogollos... esperemos tener suerte también en este cultivo. Estoy muy contento, no pensé que gracias a ZOE SPACECAKE me iba a apasionar tanto cultivar el cannabis.
Likes
9
Share
IF YOU WATCH THE VIDEO YOU CAN SEE THAT I MOVED THE LAST AUTOFLOWERS INTO THIS 5X5 TENT, AND MOVED THE PHOTOPERIODS INTO THE 8X8 TENT. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
37
Share
Ak ist mir eine sehr bekannte Genetik. Bin froh sie selber gemacht zu haben :) Pflanze war etwas zickiger, Ich hätte mich allerdings auch deutlich besser kümmern können x)
Likes
21
Share
3/11 to 3/17 Veg Days 22 to 28 Week 3 Transferred to Auto pot base and continue to top feed for another week before setting up and turning it on. Began node strength training by simply pressing down on the branches to encourage water way repairs into the branches since these are the main arms of my mainlines. They more than doubled in size in just 4 days. Feed this week was 3 cups of 6.3ph RO water once using 100ppm of Veg Mix (recipe Week 2) However, I also added 1ml/gal of CaliMagic (General Hydroponics 1-0-0). Then about 4 days later when I transferred to the auto pot, I added .5gal of plain RO water to top feed over the new soil. Feed plan next week will be to start using the reservoir and autopot base feed by the end of the week. I expect to use another .5 top feed prior to that tho.
Likes
16
Share
@NAG420
Follow
She is getting fatter by the day still have few weeks left on her. Ran into a phosphate deifications corrected it but leaves got burned in the process. Will be watching her closely. She had great bud structure and sugars on her wow frosty.
Likes
20
Share
This lady has been a joy to grow. She has been so happy and packing on the bud every minute! Only problem I see at the moment is she is getting heavy and she's starting to lean!! She is loving life under the Marshydro Tsw2000!! She is also become thirsty more often!!! This is her schedule for the week... 2/1/2022 2ml micro 1ml gro 2ml bloom 1/4ml ph down Ph 6.47 372ppm Solution temp 74.1°F 2/5/2022 Water 6.3 ph 180 Ppm Solution temp 73.2°F She has been under the Marshydro Tsw2000 at 100% power for the last 2 weeks in 🌸 The tricomes are developing more everyday she is loving life!! 💡light sponsor💡 @marshydro_amazonled @marshydro12 #marshydro #TSW2000 Low stress training clips- @madmadameplant @madmanplant Www.madmanplant.com Other companies in this grow- @foxfarmsoilandfertilizer - 100% ffof @acinfinityinc - fabric pots @generalhydroponics - flora trio line @vivosun.official - inline exhaust fan @opulent_systems - 4x4x80 grow tent @growerschoiceofficial - 1 Northern lights seeds Well till next week fellow growers!! Best of luck and Happy Growing!!🌱💚💨🔥🔥👊🏼🤟🏻🙏🏻👍🏻💪🏻💪🏻
Processing
Likes
7
Share
@Andres
Follow
not much to say about it ... just that they are slow ... summer ended a few days ago ... and the sun is not very strong outdoor ... but i I am waiting to grow and show its potential
Likes
5
Share
* Watering 2l every 3 days, no nutrients * Always tuck in the leaves to expose lower tops * Check the trichomes for amber * When amber leave the plant 2 days in darkness before harvest
Likes
41
Share
Day 70: Watered the plants 0.5L without nuts, 4L total, 170 ppm, 360 us/cm, PH 6.5 Flushing from today Day 73: Watered the plants 1L without nuts, 8L total Day 75: Watered the plants 1L without nuts, 8L total
Likes
30
Share
Hello Diary. The first week of flowering is over, the plants have grown over 50 cm, the branches have spread and now they have already started to crumple. Specifically, the Watermelon Auto has grown to 50 cm, while its roommates, Purple Punch, have grown to 60 cm. Purple Punch # 2 that sprouted a few days later has now outgrown Watermelon by a few inches. Along with the height, and in width it has expanded greatly and has rather dense branches. On the lower leaves I noticed the appearance of yellow-brown spots, I probably overdosed with fertilizers, I will see how they will behave further. The flowers started to form, so I have new motives to photograph. I water every two to three days, when each plant gets about 2 liters of water. I add food at about every other watering. Sometimes biobizz and sometimes I put Easy Grow or Easy Bloom tablet, depending on the stage the plant is in. p.H. I always adjust the water value to a value between 6.2 and 6.5. Conditions on the Farm are more or less satisfactory, the temperature is about 25 degrees while the humidity is slightly lower than satisfactory, varying between 40% and 50%. At the beginning of the week, I also changed the light regime to 20 hours of the day and 4 hours of the night. Here’s a brief overview of the past week. 18/02/2021 - Day 23. Watering. I adjusted the water to 6.3 p.H with Plagron’s Lemon Kick and added 1.5 mL / lit CalMg preventively. Temp / Humidity on the farm - 25 degrees and 41% humidity. 20/02/2021 - Day 25. Watering. I regulated the water to 6.4 p.H, I added 1ml / lit CalMg and BioBizz as scheduled for the first week of flowering. Temp / Humidity on the farm - 24.4 degrees and 43% humidity. 22/02/2021 - Day 27. Watering. This time I watered only with water which I regulated p.H at 6.3. Temp / Humidity on the farm - 24.6 degrees and 40% humidity. 23/02/2021 - Day 28. Photography and height measurement. Temp / Humidity on the farm - 25 degrees and 42% humidity. That’s it for this week, a big hello and thank you to everyone who follows the diary and thanks for the comments. See you soon.
Likes
6
Share
@Headies
Follow
So we got some very bushy plants. I topped them three times and trained them sideways and the plant focused it's energy on growing out sideways.
Likes
7
Share
She is a beast at the end of week 5 (day 35). LST Goal: Create an even FLAT Canopy with out the use of Scrog nets or stakes. This is achieved by tying down all the branches evenly, so that every top gets the same amount of exposure to light, air and nutrients.
Likes
8
Share
These girls have become part of our favourites list and we are already discussing the next round for this strain! As you can see one of them has powdery mildew and will most definitely need a wash. This is also the one that had the issue with the rust a while back and her colours have not changed like the other two. Her buds are still beautifully formed and smell delicious, so the issues for the week are obvious, but they could be much worse.
Likes
2
Share
@El3vated
Follow
Being that this was my 1st grow, I found this strain very easy to work with. It did great with LST and the smell started being pretty strong during early flowering. I completed this grow in a small tent. Now that I have a bigger tent, I would love to grow it again and see if I can get it a little bigger.
Likes
13
Share
Top dress her also… trying out this new fertilizer so far so good bud sites everywhere.
Likes
32
Share
@EBPbyEVD
Follow
Hello world 👋👋👋 According to our deadlines 41vege 14-12/12 4bloom The guy is actively scattering pollen, even too actively there is a fear that he will shoot back too quickly, I am trying to collect pollen. I am doing this for the first time and have tested different methods: 1) I put the bag on the branches, but condensation collects in these bags and kills this pollen, maybe I don’t understand something, I heard about this method quite often, but I still don’t understand how it works 2) I laid the sheets under the plants, the pollen does not seem to fall off as much as I would like and there is also a lot of debris left on the sheets. The method certainly works, but there are some nuances 3) For myself, I chose to collect pollen by hand from the leaves, simply brushing it directly into the storage container with a brush. Since this is my first experience, I don’t know how pollen behaves in a box and specifically in my box, so I try to apply it manually to the largest plant, in the end it will be clear whether this makes sense or whether the pollen itself gets to the flowers perfectly. One of my girls was attacked by a fan, which I turned off and fixed at the very top so that when I opened the box, it wouldn’t blow pollen out for me. As a result, it fell and broke a couple of good branches😭😭😭, now I have a wonderful bouquet of plants in my bedroom In general, I increased it to 1000, but I continue to give different doses so as not to catch salting. I also removed Plagron Green Sensation food since I ran out of it, I want to change the manufacturer. Plagron generally suits me, but why not try something new, maybe you can recommend something? Oh yes, the compote, this week it looks like this: 27/11 KalMag 5ml Ab 8ml GS4ml PB 4ml 761/6.2 2) output 848/6.4 1) without exit 29/11 KalMag 5ml ab10ml GS5ml PB 5ml 807/6.3 3) 5l 807/6.3 was not enough KalMag5ml AB12ml PB5ml 874/6.2 output 706/6.0 1)874/6.2 output 824/6.3 2)874/6.2 680/6.6 41vege 14-12/12 1coIn general, I increased it to 1000, but I continue to give different doses so as not to catch salting. I also removed Plagron Green Sensation food since I ran out of it, I want to change the manufacturer. Plagron generally suits me, but why not try something new, maybe you can recommend something? Oh yes, the compote, this week it looks like this: 27/11 KalMag 5ml Ab 8ml GS4ml PB 4ml 761/6.2 2) output 848/6.4 1) without exit 29/11 KalMag 5ml ab10ml GS5ml PB 5ml 807/6.3 3) 5l 807/6.3 was not enough KalMag5ml AB12ml PB5ml 874/6.2 output 706/6.0 1)874/6.2 output 824/6.3 2)874/6.2 680/6.6 41vege 14-12/12 1bloom 2/12 CalMag5ml AB16ml PB5ml 1038/5.9 1)Output 882/6.5 2) output 952/6.4 41vege 14-12/12 3 bloom (entire solution per 5 liters) On this note we will end our report. See you again friends❤️
Likes
170
Share
@nonick123
Follow
Día 54 (10/03) Riego 1,25 Litro H20 + Wholly Base 2,5 ml/l + Solid Green 2 ml/l + Early Flower 1,25 ml/l de Gen1:11 TDS 1033 PPMs - pH 6,51 Día 55 (11/03) Defoliation time! Con la increíble ayuda de @miyaguiokpolilla, @dogdoctorofficial y @growwithflow420 hice la defoliación recomendada exactamente después de 21 días cambiada a 12/12 Consejos de defoliación - Elimine menos del 20% de las hojas de abanico y solo las hojas de abanico - Retirar el tercio inferior de la planta, incluidas las ramitas. - Retirar las hojas en forma de abanico dirigidas hacia el interior de la planta. - Retire las hojas de abanico que dan sombra a los futuros cogollos. Día 56 (12/03) Esperando algo de estrés tras la defoliación... Han crecido 2 centímetros en 24 horas 😍🚀 Día 57 (13/03) Riego 1,25 Litro H20 + Wholly Base 2,5 ml/l + Solid Green 2 ml/l + Early Flower 1,25 ml/l de Gen1:11 TDS 1043 PPMs - pH 7,0 Las plantas muestras una ligera deficiencia de CalMag. Voy a subir el pH a 7.0 en este riego para mejorar la biodisponibilidad Día 58 (14/03) Siguen con su crecimientos, los cogollos formándose y las hojas de azúcar empezando a llenarse de resina Parece que la corrección de la deficiencia de CalMag ha sido muy efectiva! No hay más manchas y las plantas no paran! Día 59 (15/03) Como mañana me voy a Spannabis 😍 voy a adelantar 1 día el riego reduciéndolo a 1 litro Riego 1 Litro H20 + Wholly Base 2,5 ml/l + Solid Green 2 ml/l + Early Flower 1,25 ml/l de Gen1:11 TDS 1080 PPMs - pH 6,57 Día 60 (16/03) Spannabis time! 🚀 Día 61 (17/03) Spannabis time! 🚀 💦Nutrients by Gen1:11 - www.genoneeleven.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
24
Share
The Apple Betty Babies have been chugging along, doing their thing ❤️ The frost is starting! These girls are early producers, and seem to be responding well to the wind and light stress! The second trellis was definitely needed. They have been keeping to the same schedule of needing to be watered every 72 hours. I will be switching from cal/Mag to Mag/Sulphur supplements later this week. ❤️ how readily available these Advanced Nutrients are. The nutrient burn on some of the tips has not spread or gotten worse. The feed range seems to be the 700-750 range. Still keeping to the feed, water, feed schedule. I’ve increased the light intensity to 90% and will probably be stopping there. The temps have been getting as high as 81 degrees, and low as 73 at night. I’ve decreased the humidity to fluctuate around 50% , giving a reasonable VPD for most of the time, thanks to the automation of the in-line exhaust fan. Still have 4-5 weeks for these babies, I’m hoping they continue to plump up, they are showing some great promise. Happy Gardening 🤗❤️👊🇨🇦
Likes
Comments
Share
@GrowinSho
Follow
Should be planting seed tomorrow 6/6/26.