All is developing nicely, introduced cannazym and boost to the mix. Finally I have access to a better camera which you will see on the later pics. The cuttings I took seem to survive for now, with some outrooting their cubes already.

on day 21 of flower the 2 lady have got a new Haircut. Also some composttea on day 22 of flower. Light hits the plants with around 850 PPFD. Both plants look very similar (same leaf shape and structure), but one is about 15% larger than her sister. They both look healthy and vigorous.

: 1:🏼: 1:🏼: 1:🏼4992

Welcome to week 8 of my grow diary. This week we had really good weather. Due to the high temperatures the soil dried out quickly so I had to water 8 litres almost every day instead of every 2 days. The plant was defoliated 3 times this week. The aphids were successfully controlled with neem oil. See you next week ✌️

Hello!, Day 60 Flower I just done the my first harvest ever. Gelat og has cool looking buds, After seen the BUD ROT on one single bud in day 59 yesterday , Today in Day 60 i just cut the plant down for Dry. Going to WASH the buds with H202 (half of them) and going to dry for 10-14 Days and in to Jars for another 14-21 Days as I learned from fellow growmies. Thanks for everyone who support me through my First ever grow. Thumbs up guys. Day 60 - Harvest - 02-01-23 Day 01 - Dry - 02-01-23

A bigger dome is on the list of things to build I need to allow more room for these absolute Trees to sprawl out. I never imagined they would get this size and this is all before pre-flower stretch I don’t even know what to expect when she starts This is honestly a dream I’ve accidentally created a forest! so much good quality organic medicine to keep me happy all year

I think about the fact that it is no longer necessary to cut leaves. I cut it a lot, but I notice that many people cut a bunch of leaves at one time, although somewhere I read no more than 10% at a time. When I gave fertilizers, I always diluted them with water even more to reduce ppm Day 68: I added cal-mag to the diet because the leaves are really turning yellow from the bottom. 0.5 ml Day 70: I added 1 ml cal-mag

Keep an eye on EC and ph DAILY 👍 Broke the drill today by getting hair tangled in it , 😂

Week 9 - Day 58 - 02/23 to 2/28 2021 All phone pictures. Go off site to my instagram for HD/DSLR content: https://www.instagram.com/glazedgrow/ Red Poison from @Sweet_Seeds makes my mouth water. A sweeter more candy tone overall compared to other earthy purples like the LSD-25 beside it. Great colour and cluster of bud sites on the main cola all fighting for light/chunk space so should end up with a nice amount of bag appeal/photo subjects nearing the end. Big thick white pistils with some starting to orange as it enters the 6th week of flower. Can't wait to see how the main nug looks. Gave all the plants mostly water feeds this week in order to avoid salt build up. Some staining on the bottom of the fabric pots from the bottom feeds so just making sure the soil is fine for the final major nute feeds before flushing in a week or so. Made some caps with homemade thc olive oil from a friend that sent me some "Intergalactic Cable" viewing materials as well 😎 Have to use them fast but been stable for a week and not just starting to come through the gel caps, will have to get something harder next time still a lot left in the bottle. It's closest to the window and i keep my tent open so when the light is off it's getting a solid 16-18 Celcius helping out the genetic purple pop a bit more in the leaves. Other than that, the new @MarsHydroLED TSL 2000 and @ViparSpectraLED PS1500 for veg definitely made a huge difference and the buds on the Dark Devil. Big thanks to @ViparspectraJennie for putting a new XS1000 in the mail to test on my next grow. The FB testers finally came in so excited to get some of those in the tent and under the new tester. *Sponsored Content* Feel free to check out/save some money on your next @ViparSpectraLED using discount code "GLAZEDGROW" at this link: https://www.viparspectra.com/?aff=378&utm_source=affiliate (Again check out my insta, very limited quality content will be posted here) Thanks for checking out the latest #GlazedGrow🍩 -- Go off site and check out my Instagram for better content: https://www.instagram.com/glazedgrow/ Go off site and check out my CannaBuzz profile: https://www.cannabuzz.app/users/GlazedGrow

Week 5 of vegging has come to an end. The girls are drinking daily and the new tops are developing nicely. I've been stressing the tops a bit, bending them down to let light hit the next set of nodes. The light is now at 24" and at 60 %. I'll be adjusting the intensity and height to keep dli relative. I've also been gradually decreasing light time over the course of 6 days and are currently at 14 hours. The next week will be transition to flower, giving me approximately 9 weeks to finish. Stay tuned.

Every Thursday is a new week so this Thursday will be 3 weeks into flower

Switched it up to 600w on the digital ballast. Plants really love the extra heat. 2 plants hermied unfortunately so they were "Outta There" Which left me with 4 healthy stretch ladies. Still no loud smell yet but it's got something there. We got some likkle buds too 😍 Girls are doing well they took well to the foliar spray I was applying twice a week. They are loving the extra space to stretch it seems. Feeding with water this week to regulate ppm within substrate. Proud parent 👏 See you guys next week Be good Stanton..

All the photos are in the 8x8 now. just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

68h light off

It’s week 5 of flowering, and things are looking fantastic! The adjusted nutrients for the coco substrate have clearly made a difference, as both plants are thriving and continue to develop thick layers of trichomes. ✨ Interestingly, the non-LST plant is starting to show some unique color variations, which is surprising given that both are from the same strain. This unexpected twist adds a bit of excitement, and I’m curious to see how it will develop over the next few weeks. When it comes to scent, the differences are striking! The LST variant has a bold and distinct Lemon Haze aroma—zesty and citrusy 🍋💨 while the non-LST plant gives off a fruity-sweet smell that’s incredibly rich and inviting. 🍓🍭 Unfortunately, my camera broke this week, and now I’m dealing with some low-quality pictures. 📷😔 While it’s frustrating not to capture the plants in their full glory, I’ll do my best to document their progress as clearly as possible. Overall, both plants are doing great, and I’m looking forward to seeing how they turn out in the final stretch! 💚

almost ready to cut 🤤🌱 Day 76 1-2 days and proceed with the harvest I am aspetrating that the soil dries up well. we'll see when they give us these little girls of fustbuds

Idk what to do here shes definetly flowering but idk how she is so tall shes more than doubled her height in the last 2 weeks. Thinking about bending the main top over with some string or rope. Check back next week to see if it continues to stretch haha worlds tallest auto maybe idk. The fact that I topped it and it did this really has me wondering