Some mild defoliation this week. Budding up nicely and starting to frost. This girl was having a foliar feed of algae last week but this week she's getting light foliar sprays of the Lacalva stress treatment from madame grow on top of her other feed. I'll do this every 2/3 mornings and I'll only lightly mist the top. I'll concentrate most of my foliar feed on the lower growth and undersides, away from the buds. This is the main reason I kept so many lower fan leaves this time.

June 16th, 2022 - plant had some living soil amended into substrate, plant was fed on the 14th, defoliated a bit, extra support installed due to the punishing winds of the location. More Rain Heat and Humidity are scheduled. See where it goes… she looks Healthy

So decided to chop them down this week.. I checked the trichomes and majority was cloudy with a hint of amber, and also gotten a few opinion from growers and they said it looks just about done .. once this drys I’ll be back with the weight

These little girls seem to be moving along as their mother plants did on day 7 in 4" pots of soil, the average clones is 3" to 6" tall, I will try to stretch these girls to 12-14" by next Sat to get ready to transplant to 3gal grow bags as the 4" pots should be root bound by then, will update on next transplant

Tent is about to burst 😂 I defoliated but the little Lady just continues doing her thing. 7/26 Scrog started 7/28 Flowering progress on the run

Photoperiod buds 🤩 The smell is absolutely divine very fruity,sweet & tropical🍋🍊🍉🍌 Solid like a diamond 💎 Bay harbor butcher’s trim to show the density

Week 11 Excellent development, helped by a gradual increase in light intensity up to 45 DLI. They’re still looking beautifully green, and the tallest one at the back right had a top cola that was already perfectly ripe, so I took home a little souvenir. Basically, the turbo one as big as the palm of my hand, made of a greasy, sticky, absolutely delicious mass. 🌳🍭 Let the good times roll!

Weiter geht es mit der wöchentlichen Entlaubung. Es ist darauf zu achten, dass die Buds nicht von Blättern überdeckt sind für das perfekte Wachstum. Kleine Seitenzweige die zu wenig licht bekommen oder zusammenhängen werden entfernt, da es zu Schimmel führen kann und die verschwendete Energie lieber in den Hauptzwei gehen soll. Selbst bei Automatics darf man da nicht zurückhaltend sein.

This girl is done. Getting the chop tonite. Been so much damn fun. Bathroom photo shoot turned out great. Very happy with this girl. Gonna be sad to chop her down.

Lovin her so far. Fingers crossed but i havent had a problem with her yet. Did my math wrong on the nutes so i fixed that this week. Spread out leaves so shes easy to defoliate and she doesnt really need it much cause all the parts still get light. She just started showing pistils which im super happy happy about The stems smell super dank but still a pretty weak smell so far. 3 days later and shes even taller and the pistils are starting to look like buds. She dried up already so i gave them an extra litre of water this time so i adjusted the nutes a bit. I plucked a lot of the big leaves again. IDK if that was a good idea or not but it felt right because so many of the lower branches werent getting that much light. I didnt go too crazy and left some leaves. She bounced back fine last time so im not worried. Cant wait to see some buds!!

IM SLOWLY MOVING ALL THE PHOTOPERIODS INTO THE 8X8 TENT. THEY HAVE BEEN IN VEG FOR TOO LONG AND STARTING TO SHOW ROOT BOUND SYMPTOMS, SO IM HOPING I DIDNT WAIT TOO LONG TO FLOWER THEM🙏🙏🙏🤞🤞🤞 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

The plant has been doing great with all the tent for herself she seems to be more comfortable obviously and is giving back huge flowers A interesting thing about her is that she is very thirsty she requires water at least every two or three days and she will take approximately 7 gallons I also didn’t knew how the plant was going to react to have the other route in a little bit of the stem still on the planter I was not sure if she was going to react adverse to it but this plant seems to be a very resilient and strong plant that gives out big flower my only thing that I don’t like about her if I could complain about some thing is the The fact that she does not have too much of a smell in fact is ideal for stealth growth because you cannot smell her unless she is in your face

I replaced the nutrients and water; this time, I mixed the nutrients the day before. I've also dropped the water level in the DWC buckets by 3cm to try and give roots more oxygen. The lights were raised by another 10cm and increased brightness from 25% to 50%. Due to our cold spell and the location of the tent finding it hard to keep the temperature consistently above 70+

💥 Monster Marker – Week 4 🌱 She’s now in her final pot for flowering

Only one video this week