0.23v tuned to 7.83Hz Plants exposed to the Schumann resonance often show greater resistance to stress factors such as drought, diseases, and pests. It is possible that these natural electromagnetic waves strengthen plants' immune systems and increase their ability to resist disease. Pretty neat, in the afternoon when the tent hovers around 84F the plants are 🙏, can visually see in time around 10 minutes after I opened the tent the temp had dropped to 76 pressure was lost, she is still chilling but she doesn't quite have that perk anymore. *Salinity3.5% - 100ml H2O=100g The concentration of salt in a solution 3.5%= 3.5g in 100ml. Growing well. Not going to top or do any training, I'll let the plant do its own thing, she is constructing foundations now for what she senses ahead. Smart girl. ✨️ Let her, do her thing, let me do mine. The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity. Green hydrogen is hydrogen produced by the electrolysis of water, using renewable electricity. The production of green hydrogen causes significantly lower greenhouse gas emissions than the production of grey hydrogen, which is derived from fossil fuels without carbon capture. Electrolysis of pure water requires excess energy in the form of overpotential to overcome various activation barriers. Without the excess energy, electrolysis occurs slowly or not at all. This is in part due to the limited self-ionization of water. Pure water has an electrical conductivity of about one hundred thousandths that of seawater. Efficiency is increased through the addition of an electrolyte (such as a salt, acid or base). Photoelectrolysis of water, also known as photoelectrochemical water splitting, occurs in a photoelectrochemical cell when light is used as the energy source for the electrolysis of water, producing dihydrogen . Photoelectrolysis is sometimes known colloquially as the hydrogen holy grail for its potential to yield a viable alternative to petroleum as a source of energy. The PEC cell primarily consists of three components: the photoelectrode the electrolyte and a counter electrode. The semiconductor crucial to this process, absorbs sunlight, initiating electron excitation and subsequent water molecule splitting into hydrogen and oxygen. Water electrolysis requires a minimum potential difference of 1.23 volts, although at that voltage external heat is also required. Typically 1.5 volts is required. Biochar, a by-product of biomass pyrolysis, is typically characterized by high carbon content, aromaticity, porosity, cation exchange capacity, stability, and reactivity. The coupling of biochar oxidation reaction (BOR) with water electrolysis constitutes biochar-assisted water electrolysis (BAWE) for hydrogen production, which has been demonstrated to reduce the electricity consumption of conventional water electrolysis from 1.23v to 0.21v. Biochar particles added to the electrolyte form a two-phase solution, in which the biochar oxidation reaction (BOR) has a lower potential (0.21 V vs. RHE) than OER (1.23 V vs. RHE), reducing the energy consumption for hydrogen production via biochar-assisted water electrolysis (BAWE). BAWE produces H2 under 1 V while eliminating O2 formation: key word "eliminating". Air with a normal oxygen concentration of around 21% is not considered explosive on its own; however, if a flammable gas or vapor is present, increasing the oxygen percentage above 23.5% can significantly increase the risk of ignition and explosion due to the enriched oxygen environment. The addition of ion mediators (Fe3+/Fe2+) significantly increases BOR kinetics. Air: Nitrogen -- N2 -- 78.084% Carbon Dioxide -- CO2 -- 0.04% Hydrogen in homosphere H -- 0.00005% Hydrogen "GAS" H2 in homosphere - 0% "Nitrogen, oxygen, and argon are the three main components of Earth's atmosphere. Water concentration varies but averages around 0.25% of the atmosphere by mass. Carbon dioxide and all of the other elements and compounds are trace gases. Trace gases include the greenhouse gases carbon dioxide, methane, nitrous oxide, and ozone. Except for argon, other noble gases are trace elements (these include neon, helium, krypton, and xenon). Industrial pollutants include chlorine and its compounds, fluorine and its compounds, elemental mercury vapor, sulfur dioxide, and hydrogen sulfide. Other components of Earth's atmosphere include spores, pollen, volcanic ash, and salt from sea spray." Although the CRC table does not list water vapor (H2O), air can contain as much as 5% water vapor, more commonly ranging from 1-3%. The 1-5% range places water vapor as the third most common gas (which alters the other percentages accordingly). Water content varies according to air temperature. Dry air is denser than humid air. However, sometimes humid air contains actual water droplets, which can make it more dense than humid air that only contains water vapor. The homosphere(where you live) is the portion of the atmosphere with a fairly uniform composition due to atmospheric turbulence. In contrast, the heterosphere is the part of the atmosphere where chemical composition varies mainly according to altitude. The lower portion of the heterosphere contains oxygen and nitrogen, but these heavier elements do not occur higher up. The upper heterosphere consists almost entirely of hydrogen, cool. 78%nitrogen as N2, a far too stable bond to be used by organisms. 20%oxygen 0.04%co2 0.00005% hydrogen When lightning strikes, it tears apart the bond in airborne nitrogen molecules. Those free nitrogen atoms N2 nitrites then have the chance to combine with oxygen molecules to form a compound called nitrates N3. Once formed, the nitrates are carried down to the ground becoming usable by organisms. Will it react with the oxygen in the air spontaneously, the answer is no. The mixture is chemically stable indefinitely. A mixture with air near the release point can be ignited, but if this does not happen then when its concentration gets below 4% it will be unable to carry a flame. Taking a small detour into chemistry here, a key concept to understanding the health impact of nitrogen-based compounds is knowing the difference between nitrates and nitrites. What Are Nitrates and Nitrites? A nitrite (NO2) is a nitrogen atom bonded to only two nitrogen atoms. Very strong bond A nitrate (NO3) is a nitrogen atom bonded to three oxygen atoms. Weaker bond The optimal pH for nitrate (NO3-) depends on the process and the type of bacteria involved. Nitrification The optimal pH for nitrification is between 7.5 and 8.6 Nitrification is the process of oxidizing ammonia to nitrate and nitrite Nitrosomonas has an optimal pH between 7.0 and 8.0 Nitrobacter has an optimal pH between 7.5 and 8.0 Nitrification ceases at pH

Day 53 Started to flush the Fruitspirit finally i see some amber trichomes 😆 Flushing just with plain water PH 6.5 I will do closeups tomorrow! 💪 Skittelz is packing on buds as she should.... She isnt the biggest fan of high nutrient content but looks like pure Indica power! Green gelato is an crazy.... I dont understand this bud 👽 She looks amber enaught to be harvested but she is still putting on weight and I wanna give her all the time she needs Day 54 Took some closeups today and as you can see only weeks to go👻 The smell of the Gelato is so overpowering I love it 😁 im so happy that I took some clones they will grow outside soon if when they are strong enaught💪💪😅 Today i added a fresh pack of TNB Natural Co2 Enhancer for the final flower weeks....

One more week and then harvest she is not a big plant but definitely super frosty

Essa semana elas continuam crescendo bem e eu cortei a alimentação. estão tomando muita agua tambem.

10 days to go for Sweet Skunk. Frisian Dew has still a long way to go.

Diese Woche war für die Pflanzen eine große Belastung, da sie in den Keller umgezogen sind. In der Wohnung wurde es einfach zu warm. Die Box hat einen Zuluftschlauch bekommen, sodass immer Frischluft von außen kommt. Die Abluft wird auch nach außen abgeführt. Der Keller wird zusätzlich mit einem Amazon Badezimmerlüfter belüftet. Die Luftfeuchtigkeit konnte somit im Durchschnitt auf 60 Prozent gesenkt werden. Bei Regen hatte ich auch schon Höchstwerte von 82 Prozent in der Box. Dazu habe ich einen zusätzlichen Handylüfter in der Box installiert, der 40 Watt hat und für gute Belüftung sorgt. Zusätzlich baue ich mir nächste Woche ein Belüftungssystem mit KG-Rohren. Ich nehme zwei Stück und installiere sie an der Zuluft der Box. Dann werden sie am Rand der Box platziert und Löcher rein gebohrt, um die Pflanzen von unten zu belüften. Die Rohre kommen auf die ganze Fläche von 1,5 Metern. Was den Dünger betrifft, kann ich nur sagen, ich bin sehr zufrieden. Die Buds werden langsam echt fett. Die Pflanzen weisen keine Mängel auf, bis auf Calzium-Magnesium, das zusätzlich über das Gießwasser eingebracht wird. Apropos Gießwasser: Ich habe mir Tropfer und ein 100-l-Autotop-Flexi-Tank bestellt. Dazu ausführlicher Bericht nächste Woche, so wie zu der ab und zu Luft. Die Lampen laufen mittlerweile auf 100 Prozent. Die Titan sind mittlerweile im Schnitt 75 cm groß, so wie die Cosmos. Diese Pflanze ist sehr durstig und bekommt mehr Wasser als die anderen und ist im Umfang deutlich größer als die Titan und Epsilon. Die Epsilon sind ca. 55 cm im Durchschnitt, haben aber die dicksten Buds. Wichtigste Punkte: - Pflanzen in den Keller umgezogen wegen zu hoher Temperaturen in der Wohnung - Belüftungssystem installiert (Zuluft, Abluft, Badlüfter, zusätzlicher Lüfter in der Box) - Luftfeuchtigkeit im Durchschnitt auf 60% gesenkt - Neues Belüftungssystem mit KG-Rohren geplant - Dünger zufriedenstellend, Buds werden größer - Calzium-Magnesium-Mangel, wird über Gießwasser ausgeglichen - Neue Bewässerung (Tropfer, Flexi-Tank) bestellt - Lampen auf 100% - Titan und Cosmos ca. 75 cm, Cosmos durstiger - Epsilon ca. 55 cm, dickste Buds !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!es fehlen noch Bilder Nachtrag kommt !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ein danke geht raus an meine Freundin sie Übernimmt Bilder und Videos.

I am now on day 49 an yes these buds are blooming up very nice plants are standing around 70cm with multiple buds all over the plant am looking to run them to at least 70days with a two week flush I will be posting pictures very soon to show you guys what barney's purple punch can deliver!!! Am very confident off getting a big yeild from 2 600w lights on 2plants I will keep you updated!!

Final 2 weeks

Lights out! Darkness for 48 now. Finally. Bitter sweet to see the girls alive for the last time. Harvest time now. Super stoked! 😎 Got some good pics of the trics even some showing amber. Been a smooth grow after the early bumps. Next update is harvest and jar. Thanks for looking 👁️

She was easy to grow and got a huge main cola

EDIT: I've added some pics and video of my negative pressure setup to ensure no smells in my little 8x8 office! In fact, this room has the freshest smelling air in the house because it's constantly filtered XD This is what hospitals do when they quarantine people -- they put you in a negative flow room so any drafts you feel under the door, from the ceiling and windows, microscopic holes in the room, etc are going INTO the room, and exhaust is controlled through some decontamination method (I'm unfamiliar with that part of it). This week was a huge struggle with the clones. Self-inflicted. I was going to keep them in the buckets for a while, but when I watered them mid-diary-week pot A was not draining even though it has some decent drain holes and rocks on the bottom. I tried digging out the sides down to the bottom to try to open it up, I tried mashing on the sides and bottom of the pot to break stuff up... But it just would not stop being a pool of standing water :( So, I had to do an emergency transplant into the new perlite hempy bucket. Now other than a washed out soil/root plug about the size of my fist, I'm hydro in 100% perlite. (Manual Hydro though, I am the pump! :P) Been giving it MaxiGro since, and I think it actually really loves being in the perlite :O After having such success with the transplant for A, I decided to transplant B right after just because. But, I didn't cut one of the LST strings all the way :facepalm: When I went to lift it out I didn't get very far at all and the main stem snapped off, leaving only one fan leaf and some tiny growth! I figured since it has a healthy root system, it'd eventually recover / stabilize. So I did one of those "whistle while sweeping it under the rug" things, and just put it back the way it was. I've noticed a bit of growth today on official end of week clone servicing day, so I went ahead and transplanted B into a hydro bucket too! Gave it 2-7-7 cactus food and a splash of CaliMagic, the higher P and K of the cactus food should help it recover faster (or so I've read). We'll see how this goes moving forward. Even if it's a flop, it'll at least be a learning experience. I've moved plenty of plants from pot to pot, but never from grow medium to grow medium -- which is actually quite stressful and dangerous to the plant if you don't do it perfectly with all the precautions in place (like using gloves so you don't touch the roots!) I'm excited at the prospect of not having to screw around with soil any more. I can just rinse and sterilize (will use steam most likely) the perlite and it's good to go for the next grow! A shout out to someone I met on here that has been patiently answering all my questions regarding the hempy buckets, perlite, hydro nutrients, etc. I don't want to reference them by name because I don't want to risk causing them to receive a flood of questions from a bunch of random people.

12/12 + 54 jours Vu qu’il y a 16 plantes mais que sur growdiaries on ne peut mettre que 8 variétés j'ai divisé en 2 diaries pour le bas de la tente 1️⃣ 🏠 90x60x90 ☀️ FC-E 4800 => puissance a 80% 🍁 1x Black Bomb / Philosopher Seed 2x Amnesia Lemon / PEV Seeds 1x Blueberry / PEV Seeds 1x Blueberry / 00 Seeds 1x Wappa / Paradise Seed 1x Dark Phoenix / Green House Seed 1x Quick Sherbet / Exotic Seeds 1x Mango Cream / Exotic Seeds 1x Banana Frosting / Sensi Seed 1x Hindu Kush / Sensi Seed 3x Fast Mix / Sweet Seed 📎 https://growdiaries.com/diaries/122084-grow-journal-by-soosan 📎https://growdiaries.com/diaries/124052-grow-journal-by-soosan 2️⃣ 🏠 30x60x50 ☀️TS1000 => puissance a 100% 🍁 4x Quick Sherbet - Exotic Seed 📎 https://growdiaries.com/diaries/122080-grow-journal-by-soosan

The gutter hoe grow show powered by the viparspectra XS2000 is moving along. A couple of the plants started showing some nitrogen deficiency early in the week after the water change so I gave them a little maxigro. I'm not sure if the roots are running out of room or what is going on but the nutrient does aren't as efficient in this gutter compared to the dutch buckets. I suprecropped the crescendo to keep it even with the other plants. The cookies has strange looking buds on top. Not many pistils popping on it. Other than that the show will go on.....

Just started the 12-12 with carbon load and this thing sprouts like crazy...

I don't plan on doing any topping. Just all low stress training. I think I'll do some topping on my next grow round and compare the 2 grows.

Man I’ll say my first auto flower and my first grow it was intense and I loved every moment I was so excited and almost couldn’t wait but I did and I’m so happy I did wait. I Highly recommend the strand!!! To any one

Esta es una genética de un olor muy fuerte y pesado se siente intenso desde la vegetación , es una variedad muy resinosa con unos colores morados hermosos , probando las flores cuando terminó el secado y ahora curando las flores se siente un sabor terroso , al principio no me gusto ya que nunca había probado este , pero después al seguir fumando se siente un sabor final muy agradable. Esta genética se conservará para futuros cruces y experimentar algo nuevo. muy conforme con la producción de cada clon