Likes
Comments
Share
Growth has slowed after the House sitter issue but I’m just gonna let her take her time. I Think that she’s about a week behind. She was also getting too close to the lights which I believe started to stress her. I rigged them up higher and i'm sure it we will coast right into harvest from here. This strain is awesome, I've seen that it's not considered easy to grow and I can tell shes fussy but she definitely tells me what she needs and what's wrong. She reeks of very pungent lemon with a hint of skunk.
Likes
51
Share
Day 43: Week 7 off to a good start. Watered with just PH’d water. The soil PH is reading 7.0 so I’m bringing the water/feeds closer to 6.0 to try bring it down a bit. Took nearly 4ltrs again. Moved around another 5 cm away from light, just to be safe. I only have around 20cm left to play with so hopefully it doesn’t get much taller. Day 45: Watered with nutrients (1ml SR, 5ml B) with PH @ 6.3. Took 3ltrs. I measured the PH of run off and it’s reading 7.0. It’s fairly dark down below the canopy and I want to give the plant a break from me clipping leaves off so I’ve added in one 23watt Warm White (2700k) standard home CFL bulb down low. I don’t know how much it will help but it won’t hurt so no harm in sticking it in. Day 47: Watered with nutrients (1ml SR, 5ml B). Took 3ltrs, run off measured at 7.0. Plant looks happy and healthy which is great considering how much defoliation I’m having to do. I’m thinking now that two 9ltr pots might be too big for my space. Day 49: Seven weeks old today and looking happy and healthy. Watered with nutrients and added Green Sensation to the feed (1ml SR, 1ml GS, 2ml B). Plant grew 10cm this week. I think the main stretch is over now.
Processing
Likes
14
Share
@4F1M6
Follow
I started germination of 3 Crystal Candy fv beans on 29/12/2020. I pre moistened my rockwool cubes with ph balanced water to 6.4. Made sure the plugs were just damp and not soaked. Using a small wooden dowel I increased the size of the plugs pre made holes. Than I sowed my beans into the holes. Ripped off a small piece of rockwool and mulched it up. Lightly filled the holes in with the mulched rockwool. Than stuck the plugs into a misted humidity dome, to complete germination. Shouldn't take anymore than 4-5 days to see some sprouts. Once I see some cotlydon leaves bursting to the surface. I will get the plugs planted into some 1 gallon pots. Plus get these ladies situated into their home. Cant wait! This is my first look at this variety so I have no background information on experience for this one. But I will get some from this grow, and if shes blessed. There could be a second run in the future.
Likes
8
Share
This girl did amazing, even after being blasted by a space heater. Strong secondary branching, big colas producer, nice trichomes coverage and good bud density.
Likes
11
Share
Week 5 flowering for our banana purple punch from fastbuds 420! The buds are starting to get fatter day by day, we continue with our food program. This week again we gave sugar shot, sticky fingers, bloom booster, silica, amino and master root all from xpert nutrients. All good at the moment 🤗
Likes
3
Share
Papaya cookies are incredible! All the pistils turn purple, incredible beauty of this plant. We are so happy to have caught this extraordinary phenotype and are looking forward to an early harvest in about 2 weeks time.
Likes
12
Share
@rickhaZe
Follow
Dia 32: agregamos mas sustrato a cada planta y realizamos poda de hojas bajas y nudos mas desfavorable Dia 35: agregamos la primera dosis de blossom blaster pro. 6 ml en 6 litro de agua, aplicamos 500ml a cada planta. Dia 37: aplicamos 500ml de agua por planta. Dia 38: sesión de fotos a todos los ejemplares de este cultivo y rotación de las plantas dentro de la carpa, todos los dias hago estos movimientos para que todas capten la misma luminosidad y el sustrato se seque mas parejo. Dia 39: aplicaremos monster bloom en el cultivo, la solución será de 1.8g (ya que es en polvo) en 6 litros de agua
Processing
Likes
13
Share
Всем тем, кто следит за мной здоровья и удачи, надеюсь вы в безопасности. Наступило время вновь обновить «HiFi 4G» от «Dutch Passion» в далёких генах которого есть Fire OG. Уже четвёртая неделя от прорастания семечек. Прогресс на лицо. Я планирую выращивать клонов с нижних веток, именно поэтому я сделал дефолиацию на ранней стадии и не стал формировать крону, так как нижние ветки растения будут клонированы. Дефолиация полезна не только тем, что открывает свет боковым веткам, но также огромные листьев не забирают важные гормоны роста. В этот раз не стал добавлять какие-либо удобрения, а пролил обычной водой с пониженным PH. Так же я подключил дополнительное освещенье полный спектр LED по 27W. Теперь я оставлю растение в покое и буду ждать, когда отрастут ветки на клонирование. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- To all those who follow me health and good luck, I hope you are safe. It's time to re-update "HiFi 4G" from "Dutch Passion" in the distant genes of which there is Fire OG. It is already the fourth week from the germination of seeds. Progress on the face. I plan to grow clones from the lower branches, which is why I did defoliation at an early stage and did not form a crown, since the lower branches of the plant will be cloned. Defoliation is useful not only because it opens the light to the side branches, but also because the leaves do not take away important growth hormones. This time I did not add any fertilizers, but spilled it with ordinary water with a low PH. I also connected additional lighting with a full range of 27W LED. Now I will leave the plant alone and wait for the branches to grow for cloning.
Likes
6
Share
@colla69
Follow
Started 3 days ago from clone. Started LST today, also removed lower branches to encourage growth.
Likes
3
Share
Growing like crazy. Not shure what to do regarding Training. Actually i dont have space for specific Training-Techniques. Ordered some plastic clips to bend down some branches. Branches look good, reaching the top just fine. I will removed the lowest branches an try to clone. Sincen the tent is not very high, i think i will start flowering next week Removed quite a bit of fan leaves. Super hot, 30+C outside Little bit below 30C in the box I also installed a smart-meter to measure power-consumption. Regarding prices for electric-power, this is quite a thing to have an eye in.
Likes
7
Share
@Chucky324
Follow
Hello. This is the end of week 9 and the beginning of week 10 of veg. Quite week for the plants and us. It's above freezing now, but it's one storm after another here. The plants are dong well and I'll turn over to flowering next week. I'll make clones at that time. I'm after the best plant so I'll whittle the 14 plants down to 1 or 2 plants when I'm done. But I have to take 3 clones of each to be sure I get 1 to regrow when it's done. So I'll be doing that this week. My next trim/prune will be before the 3 week of flowering, before the resin starts to flow. Through this veg I've been giving a full feeding and then just watering and then a full feeding and then just watering.... You get the idea... I let the pots dry and hopefully water/feed before I get any wilting. We've started a new Freak Bros. book. Comic Book #10 Published in 1987. It's the 3rd in the trilogy. You'll find the first 2 comic books in the story in other diaries. Have a look around in my other diaries and you'll find them. OK. Have fun out there. Chuck
Likes
9
Share
@KannaKoom
Follow
6/27-8/3: In my time away, Ms. Cookies did great. She was quickly drinking down her water through the self watering base and she ended up eating all of her nutes, leaving some signs of these deficiencies when I got home. In addition to that, the soil pH was a little high at 7. So with these 2 deficiencies in mind, I flushed her with plain 6.0 pH water to bring the soil pH down, and I also amended the soil with some All Purpose 4-4-4 and Power Bloom 2-8-4. I also did some light defoliation of some larger fan leaves Overall, the plant is looking great. Had a minor setback with the deficiencies but it was honestly expected since I wasn't home to watch her closer for 2 straight weeks.
Likes
40
Share
06.12. Tag 72 Blüte 46. Hi. Niemals aufgeben, dann gibt es sowas. Erstaunlich. 16 h Licht ab jetzt. 09.12. Na gut, ich gebs zu. Ab jetzt macht es Spaß. Denn da hängt doch mehr drann, und in besserer Qualität als ich dachte. Lehrreich war der für mich bisher auf jeden Fall. Ich habe viel zu scharf gedüngt zu anfang. Stellt euch vor, diese weißen Blätter leben noch. Klar wo braun ist nicht. Aber sonst. 11.12. Seht ihre wunderschönen grünen Blätter, eine Pflanze die euch das Wasser im Munde zerfließen lässt. ( Argh ein winziges grünes Blatt. Eines! Ihr dürft gerne selber suchen.) ... ( allerdings, die Riecht guhhht, das ist richtig) Und stark, also stärker als diese Sorte sonst riecht. Ich kenne sie.
Likes
12
Share
Hey guys :-) They are developing very well :-) . Was watered twice this week with 1 l each (nutrients see table above) Maybe I'll train them this week. But I'll think about that spontaneously for reasons of space :-) . Otherwise everything is going according to plan and I wish you a lot of fun with the update and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.ripperseeds.com/en/feminized/kmintz-feminized-cannabis-seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Likes
12
Share
@TgOgFaRms
Follow
Week 5 Update: Challenges and Optimism! 🌿💪✨ Hey there, fellow growers! 👋🌱 As we dive into the fifth week of this thrilling journey, I must admit that I've encountered a few obstacles along the way. But fear not, for challenges are merely opportunities in disguise! 🌱🚀 Currently, three of my plants are still looking a bit droopy, a consequence of my underfeeding mishap. 😔 However, I've taken decisive action to rectify the situation. I've increased their water intake from 0.5 liters each to a generous 1 liter each, provided every two days. Hydration is key! 💧💦 Let's talk environmental conditions. The temperature within the grow space ranges between 20°C and 22°C, maintaining a comfortable and optimal range for our leafy companions. The humidity levels hover around 60% to 68%, thanks to the diligent work of my trusty dehumidifier. Kudos to technology! 🌡️💨💨 In light of the recent droopiness, I've temporarily adjusted the LED power to 75%. It's a careful balancing act to ensure the plants receive the right amount of light without overwhelming them. We're all about finding that sweet spot! 💡🌿✨ Interestingly, I've noticed a similar issue with droopiness during my previous grow with sour stompers. Could it be a recurring pattern? 🤔 Moreover, upon activating the dehumidifier, I made an intriguing discovery. The CO2 levels have soared over 900ppm! It seems I've stumbled upon an unexpected correlation. I'll certainly be investigating this further to unravel the mystery. Science at work! 🔬🌿🔍 Well, my fellow enthusiasts, that wraps up the highlights for this week. Let's remain optimistic as we eagerly await our plants' recovery and resurgence. I have faith that they will bounce back stronger than ever, for nature has a remarkable ability to rejuvenate. 🌿🌱💚 Remember, challenges are but stepping stones on the path to growth. Embrace them, learn from them, and continue nurturing your green wonders with love and care. Together, we shall conquer any hurdle that comes our way! 😜💪🌿🌟 Wishing you all an incredible week of growth and exploration. Happy growing, lads! 🌱🌿✨😄
Likes
9
Share
Grow Sponsored by MARSHYDRO HIGH EFFICIENCY WHITE LED LIGHT: Newest SMD LED technology provide highest PAR/LUMEN output(743umol@18"), designed to replace a single-ended 250watt HPS; MARS HYDRO TS 1000W Plants Growing lamp makes you get 30% higher yield compare OLD blurple led lights, Max 2.0g yield per wattage (power draw) LOW ENERGY CONSUMPTION GROW LIGHTING : Consuming only 150W with 342 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 2.5x2.5ft,Max coverage 3x3ft. Over 90% light energy can be absorbed by plants; higher intensity and more even coverage in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS1000 SUNLIKE FULL SPECTRUM LED INDOOR GROWING: 660-665nm Red IR/3200-4200Knm/5200-6800Knm, infinite close to natural light, best for all plants all stages growing, rapid plant response from seed to flower and increase yield & crop quality‎ HIGH REFLECTIVE & NOISE FREE-Fanless LED GROW SYSTEM design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom Get your own at https://www.amazon.de/dp/B07ZVFBR34
Likes
4
Share
Thursday 16th march day 59 Harvested a couple days earlier then planned as my humidity was getting a bit high and worried about risking mold I decided to chop, have to get a good dehumidifier soon, everything looking lovely, nice and dense with very strong fruity potent smell definitely the best looking plants I have grown to date not the biggest buds but they look quality, chopped plants whole gonna do my best to keep the temp and rh% in the dry room as close 60/60 as I can to get a nice slow dry, 🍁😎 I only took the wet weight from 1 plant back left plant was 270g with large fan leaves removed
Likes
8
Share