So this week I decided to defoliate and lollipop . I wanted to wait like atleast some more days but I got bit worried they get to bushy and crowded and now I still have the same feeling afterwards but it looks a bit better to me . Next week I will add some bloom booster with every watering . I removed my humidifier now and think about some more and heavier defoliation and lollipopping but I will let them relax now . Super silver haze is stacking up insane while orange bud is forming some more pine like buds I’d say at this point . No big smells except the classic weed smell coming from the super silver haze . She’s qualifying for a solo grow for the next time for me like the gorilla cookies from fast buds wich I also liked a lot

Mother Fucker, Had all this typed out and it fucking closed the tab and would not load last edit. Lets try this again. This has been a big week, got a transplant in and ran into some issues with the feed. Transplanted the plants from their 1L to 2Gal/7.5L pots and gave them some LST to keep em low, all went well in transplant process as seen in the video however the Gaia Green burned my plants and this is odd considering I did not use it full strength as per their directions. They recommend amending medium for pots and baskets at a rate of 3tbsp or 45ml per Gal and I used it at a rate of 60ml in 2Gal, not even close to their 90ml recommendation. Seems weird why I would be experiencing this. I reached out to them and have not heard anything back. kinda disappointed about that. I have two batches of Gaia Green 4-4-4 and when I ran a test side by side on them I found the old one I am currently useing has a higher EC value then the new one I got. I dissolved 1/4 teaspoon into 250ml of water and gave it a good stir, I then let it sit for 5 min and measured its PH and EC, I also tested out the Insect Frass from them as well and it was similar numbers to the new 4-4-4 batch. I got readings of 0.98 for new 4-4-4 and 1.43EC for the old batch of 4-4-4. Seems off. I also tested all the other things I added into the soil and they did not spike EC to any significance. I'm hoping they reach back out to let me know whats up. PH was on point and nothing crazy all aorund 7.1 I also tested the PH and EC of the watering solution to confirm it was the 4-4-4, added in some yucca in their as well as other beneficials that I normally do in soil grows. all within range, PH down with Phspohric Acid and EC under 300 A+ In other good news I finalized the PPFD maps for my tent and lights, I use 2x 240w Mini Sun 2's from Medic Grow, They don't normally use the lights in a twin setup in 2x4 tent so thus they had no light maps for me. The grow shop I go to lent me their Quantum Par light meter and I went to town, I demoed this unit last week in a little video and then went onto say how I messed up the readings and needed to redo it all. Well I had to have the meter returned and was working all week so only had time to get one height measurement in at 30" with all the intensities of the light 40-60-80-100% I had a feeling I was over blasting them with light but the amount I was thinking was not even close to how much more I was giving them. I was running my plants before at 80% and maybe 20" hang height. I was nuking them. It shows my ideals are going to be 40% in veg and 60% in flower with altered lighting schedules to accommodate a proper DLI. As of right now I am giving my plants 42 DLI in veg at 18/6 and that's a bit much for me. I would like to see this number closer to 35. So if I edit my schedule down to 16/8 it will give me a DLI of 37, when I got into bloom if I go 11/13 I will also get a DLI of 37. If I kept it at 12/12 at 60% I would have a DLI of 41, and If i did it like last time 12/12 at 80% I would have a DLI of 55... 41 is not the worst but I think it might be to much. we will see based on how the plants are growing. I used a free heatmap web page tool to make the PPFD maps, its not perfect but it works out well for me. I did all the intensities on their own image and also did one main image with all the intensities that shows the strength of 100% vs 40-60-80% in colour. The one light on the right side does not seem to be as strong as the one on the left, Or it could be some weird things with my tent, When I looked at the numbers with the door open they did not fluctuate as much. so who knows, I tested them with the door closed and extractor fan on as that's what the plants will be getting when in the tent, I centred the light as best I could and levelled it out with a bubble leveller. It was funny seeing how the PPF readout numbers changed as the tent sucked in around the sides, It is a good thing I have the mid support bar to prevent it from doing that to much. Once I mapped out all my readings in PPF I then calculated its average and PPFD using the grow space dimensions of 2x4, applied the convention and got my average PPFD :) The pepper are also doing well. I don't think I noticed a difference between soaking the seeds with some peroxide 1% vs plan water. Won't do that again does not seem to help anything. All but one variety as popped, the naga morich, has not been germinated, I was reading online that dehydrated seeds can have as low as 5% germination rate, With this in mind I took a lot of seeds from my older naga morich peppers in the pantry and placed them in a damp paper towel. I have a feeling given their age and treatment previously they will not pop, but that's ok if they don't, I have a large assortment of pepper for this season and they are already well on their way to giving me a good crop. Have not noticed any other fungus gnats in a bit. Happy about that, don't know where they went, unless it was just a few and they died before breeding. One can hope, Big shoutout to Medic Grow for sponsoring the lighting in my tent, They have provided me with 2x Mini Sun 2's in the 240w configuration, They use the v1 growing spectrum that is a all purpose seed to harvest spectrum so their is no hassle of switching it mid grow. If you interested in learning more about Medic Grow products please visit the web link below. https://medicgrow.com/ https://growdiaries.com/grower/MedicGrowLED

Amazing!! Ya buddie!

just filling up nutrient solution, adjusting light and took some small leafs away. Easy grow until now. Hope it stays this way and getting a nice purple pheno. Ordered a fan to get some air movement inside the tent. When the leafs lay on top of each other you get wet spots. Hope it arrvies soon. Update 27.06 Fan arrived and also Plagron Green Sensation and Power Buds. Used 1ml/L. Will Change the whole solution next Weekend. ————————— Deutsch Nur Nährlösung aufgefüllt, Lampenabstand geregelt, ca 35cm und ein paar kleinere Blätter entfernt. Düngeschema wie bisher. Bis jetzt läuft alles glatt, hoffe bekomme nen schönen purple Phänotyp. Einen Clipventilator bestellt für ein wenig mehr Luftbewegung wenn die Blattmasse zu dicht wird und aufeinander aufliegt. Es bilden sich dort sonst feuchte Stellen. Hoffe der kommt morgen wenn DHL es nicht vermasselt. Update 27.06.: Ventilator ist da und dazu Plagron Power Buds und Green Sensation, 1ml pro Liter direkt in den Eimer gegeben. Tausche die gesamte Lösung nächstes Wochenende.

Blütewoche 1 – Start | Crimson Clay Clone 🌸 Blütewoche eins beginnt – und der Wechsel ist klar sichtbar. Die Pflanze reagiert sofort auf den Photoperiodenwechsel: Die ersten Stretch-Bewegungen setzen ein, neue Spitzen drücken nach oben und die Struktur richtet sich langsam auf die kommende Blütenphase aus. Dieser Run basiert auf einer ursprünglich gereveggten Mutterpflanze, die aus einem feminisierten Seed von Wizard Trees selektiert wurde. Nachdem der Phänotyp im ersten Run identifiziert wurde, wurde die Pflanze erfolgreich revegged und anschließend als Mutter weitergeführt. Die Vegetationsphase dauerte etwa 2,5 Monate. Während dieser Zeit wurden mehrere neue Mutterpflanzen und Klone gesichert, um die Genetik langfristig zu stabilisieren und zukünftige Runs vorzubereiten. Erst nachdem die nächsten Backups gesichert waren, wurde die ursprüngliche reveggte Mutter schließlich in die Blüte geschickt. Man merkt dieser Pflanze die lange Vegetationsphase deutlich an: Kräftige Verzweigungen, stabile Hauptstämme und viel gespeicherte Energie im gesamten Aufbau. IPM & Pflanzenpflege Während der gesamten Vegetationsphase wurde konsequent nach dem Athena Plan gearbeitet. Stack und IPM wurden regelmäßig zwei bis drei Mal pro Woche angewendet. Aufgrund eines früheren Kontakts mit Spinnmilben wurde das Präventionsprogramm bewusst konsequent gefahren und die Dosierung zwischen minimaler und maximaler Empfehlung gehalten, um stabile Bedingungen zu gewährleisten. Die Pflanze hat sich dementsprechend sehr sichtbar entwickelt – dichtes Blattwerk, kräftige Struktur und eine stabile Gesamtvitalität. Natürlich wurde während der Vegetationsphase die Grow-Formel statt Bloom verwendet. Aktuelles Schema zum Start der Blüte • tägliche morgendliche Bewässerung mit der Standard-Nährlösung • Stack + IPM alle drei Tage • dieses Programm wird voraussichtlich bis maximal Ende Blütewoche drei weitergeführt Gerade während der Stretch-Phase ist das Ziel, die Pflanze weiterhin stabil zu halten, Stress zu minimieren und gleichzeitig ein konsequentes präventives Schädlingsmanagement aufrechtzuerhalten. Gesamtbild – Start Blüte Die Pflanze startet massiv in die Blüte. Kräftiges Blattgrün. Saubere Blattspannung. Stabile Struktur mit viel gespeicherter Energie aus der langen Veg-Phase. Die Grundlage ist gelegt. Jetzt beginnt die Phase, in der Stretch, Budsite-Bildung und genetischer Ausdruck der Crimson Clay Genetik sichtbar werden. Blütewoche 1 hat begonnen. EN – Flower Week 1 | Start Flower week one begins – and the transition is immediately visible. The plant reacts quickly to the photoperiod change: early stretch movement starts, new tops push upward, and the structure begins shifting toward full flowering mode. This run originates from an originally revegged mother plant, selected from a feminized Wizard Trees seed. After identifying the phenotype during the first run, the plant was successfully revegged and maintained as a mother to preserve the genetics. The vegetative phase lasted roughly 2.5 months. During this time several backup mothers and clones were taken, securing the genetic line and preparing for future runs. Only after those backups were established was the original revegged mother moved into the flowering cycle. The extended vegetative phase is clearly visible in the plant’s structure: strong branching, thick main stems and significant stored energy throughout the canopy. IPM & Plant Care Throughout the entire vegetative stage the plant followed the Athena schedule. Stack and IPM were applied two to three times per week. Because of a previous encounter with spider mites, the preventative program was maintained carefully, keeping the dosage between the recommended minimum and maximum range. The plant responded extremely well, developing dense foliage, strong structure and overall healthy vigor. Naturally, during vegetative growth the Grow formula was used instead of Bloom. Current schedule at the start of flower • daily morning irrigation with the standard nutrient solution • Stack + IPM every three days • this program will likely continue until the end of flower week three at most The goal during the stretch phase is to keep the plant stable, minimize stress and maintain consistent preventative pest management. Overall impression – Start of Flower The plant enters flowering with strong momentum. Healthy deep green color. Good leaf tension. Stable structural framework with energy built during the long veg phase. The foundation is set. Now the phase begins where stretch, bud site formation and the full genetic expression of the Crimson Clay phenotype start to appear. Flower week 1 has begun.

Hello growmies!! Well I ended up with just one girl in the tent and two little seedlings I'm growing 12/12 from seed (I'm just curious about it, not expecting anything too impresive) this week I actually started using my scrog net to keep the taller stems from going up and making them stay at canopy level, right now ppfd is about 1100 in most parts of the canopy...

So they all look good 👍 I was thinking i was getting to mush nitrogen in the plants thats in flower so I lowered the nutrients in today's feed for all of them that mite have been a mistake to play around with the nutrients I think from now on im just going to keep doing what im doing and thats full nutrients every two days they are takeing an extra litre of water now so 2 litres each every two days and im not getting mush run off at all they could take 3 litres if I wanted to but they seem very happy at the minute whit two buds are starting to get bigger I have added 2ml per liter of notorious bloom that looks to be doing a good job the ones thats not in flower are getting very big I think they are going to turn out very nice when they hit flower stage the small one is also growing fast now whit the full nutrients I gave it few days ago

! this is my current status, gonna upload my last veg weeks within the next week - got a bit busy around Spannabis - thank you for your understanding! 💚 Welcome to Bud Boutique Grow Diary - really appreciate all your love and support :) Dont forget to check out my other current grows! 🗓️ This Week: - Day 24: attaching once a week APTUS Foliar with Regulator & Nutrispray with the amazing CannaFogger by Petra Grow - Day 28: bud development is super beautiful on each pheno #1 and #2 Thank you for still staying with me 💚 ___________________________________________ --- 🌱 Strain (Sponsor) --- 🏷️ P.C.R. by Art Genetix https://www.artgenetix.world/product-page/p-c-r --- 🥗 Nutrients and Feeding (sponsored by APTUS: APTUS Ambassador) --- 🍸 APTUS: full nutrient schedule extreme -- Regulator, N-Boost, P-Boost, CaMg-Boost, K-Boost, Allin1 Liquid, Startbooster, Topbooster, Enzym+ every feeding -- Fulvic-Blast, NutriSpray as Foliar each once a week 🔗 https://aptus-holland.com/ --- ♻️ Grow Control (Sponsor) --- TROLMASTER: TENT-X + LM14 Light Adapter to dim/sunrise/sunset lights + Temp & rH Sensor all remote on App 🔗 https://www.trolmaster.eu/ --- 🚿 PetraGrow (Sponsor) --- CannaFogger Foliar Spray 🔗 https://www.petratools.com/product/petragrow-cannafogger-atomizer-new-mini-fogger --- 🏭 Grow Setup --- 💡LUMATEK Zeus Pro 600 * 🏠🌿 Indoor: Homebox 120x120x200cm (4x4) * 📐🌀 PrimaKlima exhausting Fan 1180m3/h (running on 60-80%) * 🌀 Can Light Filter 800m3/h & 1x Fanbox 1x Dyson fan for Air circulation 🔗 https://lumatek-lighting.com/zeus-600w-pro-29/ 🔗 https://primaklima.com/de/shop/ventilatoren-de/ec-ventilatoren/pk160ec-tc/ 🔗 https://canfilters.com/products/filters/ All Likes and comments are highly appreciated!!! 👨‍🌾 don't forget to check out my Instagram for daily educational content: budboutiquee - Bud Boutique

These ladies were a breeze to grow... Feed them all organic nutes and they loved it... They never gave me a problem and at the end of the grow I was rewarded with huge dense nuggets. One of the best performers all of the genectics in this run.

Die dritte Blütewoche startet für die Ladies und sie bekommen noch etwas Proviant mit auf den Weg. Sie bekommen jeweils 20ml Orgatrex und 1g Bactrex, gelöst in einem Liter Osmose Wasser. Ich habe den Autopots einige Tage vorher die Wasserzufuhr abgedreht, um sie nicht zu fluten. Für mehr Stabilität habe ich ein zweites Netz reingehängt. Außerdem habe ich zwei ungenutzte PC Lüfter ins Zelt gelegt um für etwas mehr Umluft zu sorgen. Desweiteren wurden einige Blätter entfernt. Die Woche neigt sich dem Ende zu und die Pflanzen sprengen das Zelt. Die Lampe hängt mittlerweile auf Anschlag.

nothing to report for now ... just grows well and outdoor...

Zkittles defo hit stretch this week and started showing more bud sites, smoothie has been as straight forward as always ,.. everything looks good to me, defoliating zkittles is crazy, the rate the leaves grow back I've never seen anything like it but hopefully now will start putting the effort into the bud sites,... roll on next week 👌

10. Woche Auch bei Godfather OG Auto läuft es soweit gut, sie steht schön in der Bloom, sie braucht mal wieder bisschen Dünger die Tage aber sonst bin ich zufrieden. Die stehen bei Mutti an einem relativ sonnigen Platz, also kann was werden 😌

Hola chicos aquí vamos en nuestra segunda semana de vegetación aprendiendo cada vez mas del arte en cultivo indoor con respecto a la temperatura y humedad, una tarea difícil cuando te consideras un principiante. Esta semana que viene voy evaluar si ya es necesario cambiar a una maceta de 5.5 Litro. La idea final es dejarla en una maceta de 11 litros.. Bueno muchachos cualquier recomendación será bienvenida. Saludos!

Vamos familia novena semana de floración de estás Punch Pie de RoyalQueenSeeds . Que ganas tengo de ver el final de progreso de esta variedad, las plantas están sanas, se ven con buen color. La cantidad de agua cada 48h entre riegos, quitamos todos los nutrientes de la gama Agrobeta. Y entramos en la recta final, últimas semanas de floración ya, y como se están hinchando las flores. Estas próximas semanas veremos cómo acaban. Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨.

Let's remember, in week 6 one of my king's tart had been broken in 2 because of the tension due to my bad LST. This plant grows much taller than the others. I'm trying to lower his height by doing HST. Currently she does not seem to complain about it. I preferred to remove my net this week, to more easily access my plants and water them. I hope the branches will hold I cut a lot of leaf this week. I hear different opinions that say it's beneficial others not... At least it will have the advantage of lowering the humidity. --------------------------------------------------------------------------- - Water: tap water at 300 PPM, I add 0.7G of Hybrid powder and 0.3g of booster PK+ per liter to reach 950PPM and I adjust the PH to 5.8. I watered daily until water drained from the pot (to release nutrients from previous waterings) and I take a 3-4 day watering break to let it dry out before resuming a daily watering schedule. -Daytime temperature: 22-26°C -Night temperature: 20-24°C -Humidity: 50-75% ( Too high but it's hard to lower it... I need advice please contact me if you have :) ) -Lamp: Mars Hydro FC3000. intensity 90% at 35cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 3/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA== Looking for MarsHydro equipment for your crop? 🔥 You can use my promo codes! 🙏😻 "houstone3" for: TS LED Grow Light, Tent, Ventilation for 3% off "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits for 5% off https://www.mars-hydro.com/?acc=hou-stone

Both are still growing healthy beautiful buds but like the rest of the tent, they were a little burned this week. I dimmed down the light. That helped with the temperature as well.