Even though I decapitated 3 inch off the top of this plant by mistake it has still produced a good amount & the quality looks good as well. Will be back with a dry weight and smoke review ✌️ out Growmes 🙏👍

FBT 2307 has been killing it. She got some nice big colas on her. I switched to ph water a few days ago. I will be looking to harvest in about 10 days roughly. I did add orange essential oil to ph water. Dunno if it will effect anything. She grew great under the Mars Hydro FC4800 light in the Athena blended line nutrition. Thank you Mars Hydro. Athena, and fast buds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

the process is going great , added potassium and the problems are gone

Giving her ph adjusted tap water to flush her out well for the chop in 7 days. 🌊✂️ First time growing a sativa dominant strain & I was expecting it to grow taller than the other hybrids in the same enviroment but it didnt. Not sure why my buds are airy & foxtailing a bit. Maybe heat stress or maybe just the genetics. 🤷‍♂️🏽Nothing else in the room showed nug structures like this so it kinda makes me suspect the bud structures to be due to genetics. 🤔

-Strain: Auto Gelato - Fast Buds -Tent: 5x5 Gorilla Grow Tent -Lights: Budget LED Grow Lights 2 x 250 Watt LED Full Spec/Red Spec mixed boards -Light Cycle: 18/6 -Soil: Fox Farm -Air Circulation: AC Infinity Cloudline T6 Inline Duct Fan WECLOME BACK GROWMIES! Week 12 here with our AUTO GELATO by Fast Buds! February, 09, 2020 (DAY 78) - YOO GROWMIES! Welcome to week 12 of our AUTO GELATO! week 6 of flower to be exact! ISNT SHE FROSTY! holy moly look at this thing, can almost go skiing lol! nothing but frost, she is starting to thicken up on the buds, i havent defoliated too much on this one because there is just too much frost all over those leaves. February 12, 2020 (DAY 81) - WHAT UPPPPP!!!! here we are folks another update. i didnt even know there were purples in the gelato auto to be honest, but the purples are getting so VIBRANT!!!!! think she is getting flushed starting this weekend. this will be the last feed then its onto that FLAWLESS FINISH by ADVANCED NUTRIENTS. hopefully im making the right choice......maybe another week wouldnt hurt....

everything changed on week 4 grow tent and cob led came to show how a good light is important. from now til last 2 weeks, only indoor growing goodbye CFL's, you worked well. + LST and ferts (2ml + 0.25) Defoliation started Removed branches from 1st node

Hidratamos por 24 hrs y pasamos a papel para continuar con la germinación.

I defoliated the Plant for the first time and adjusted the LST to the growth of the plant. I found the first white pistils shooting out from the plant which shows me she is ready to go into flower. Until now i am very happy with the progress, still no issues :)

Hello everyone 😎 A wonderful genetic thank you Dutch ❤️‍🔥🤩 The trim was super easy the buds are FAT & FROSTY full of resin 🤤 I’m very happy with the harvest 134g !! For the light i’ve used the Mars Hydro FC-E6500💡

🌵🐵 PEYOTE GORILLA BY SEEDSMAN 🐵🌵 🌵 19.3... 🌵 20.3 ... 🌵 21.3 ... 🌵 22.3 ... 🌵 23.3 ... 🌵 24.3 ... 🌵 25.3 Beautiful, healthy and strong, I can't wait to smell the scents it releases ____________________________________________________________________________________________ 📜 A look at the details of what I'm growing 📜 🌵🐵 Peyote Gorilla🐵🌵 ⚧ Gender ▪️ Feminised ➰ Genes ▪️ 60% Indica / 40% Sativa 🎄 Genetics ▪️ Gorilla Glue #4 (Chem Sister x Chocolate Diesel) x Peyote Purple (Bubba Kush purple pheno) 🚜Harvest ▪️ 600 g/m² 🌷Flowering ▪️ 65 - 70 days ✨THC ▪️ 26.0% ✅CBD ▪️ 1.0% 🏡Room Type ▪️ Indoor 🌄Room Type ▪️ Outdoor 🕋Room Type ▪️ Greenhouse 🎂Release Year ▪️ 2019 __________________________________________________________________________ 📷🥇 Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ 🔻🔻Leave a comment with your opinions if you pass by here🔻🔻 🤟🤗💚Thanks and Enjoy growth 💚🤗🤟

Super busy with a move and a big garden reno. Sorry, this is the only update for this week

Posting the phenos when I do them

Since the remain plants have revegged, I will be pampering them with nutrients how 125ml once a week, I’ll be harvesting this baby in January or end of January. Loving the bud sizes… all I need is for them firm up and finish this reveg phase, I do not mind her adding more development on the existing.

Honestly not much to say about the dry and trim, which is definitely a good thing. 12 days hanging in the tent, and the plants were ready to trim. me & the Mrs. absolutely sailed through it. Stores like a dream, and smokes the same. Not a crazy amount of flavour, but the aroma that it has is lime and cream. And the taste is more earthy and spicy. Loving and savouring every bit of it. Sorry I’m very late with this, but I’ve been busy getting my next plants started! You should see them come up soon, as I’m quite behind in my posting. I’m very happy! 🤟💚

Welcome back boys, Everything's going as planned :) Still don't know if I should defoliate, I chose to let the leaves grow a bit more until next week. I will use wood sticks to maintain them a little more spaced. See you next week buddies

FD36 - True to form I completely forgot to take any pics before the lights were out. The third week in a row. I'm detecting a pattern... lol FD37 - Pics! FD38 - Today, I was proactive in trying to prevent botrytis (budrot) since I have had problems in the past when temperatures and humidity get too high in late flower. I started with defoliating hard by removing fan leaves. That should lower the humidity in the tent as there are fewer leaves to transpire moisture, and also increase the airflow around the buds. Finally, I put my small humidifier in the tent to further lower the humidity. FD41 - The anti-humidity measures are working. The tent went from an average RH in the high 60s to the high 40s. (The average RH in the last 24 hours was 48.9%.) I'm happy with that, which should be enough to avoid budrot. Better safe than sorry, so I did additional LST to open up the plants and thus increase the airflow around the buds. It's also helpful to increase light penetration, so win-win. FD42 - We're at the end of the sixth week of flower, and things are chugging along in the tent. The buds are slowly fattening up, but it will take some time before they are done. There isn't much to do in the tent this late in flower besides watering. Today, each girl got 2.5-liters of water @ pH 6.5.

Welcome to my MilkyWay F1 Auto Diary, Untopped VS topped. Results are in. Days 71-82 ripening 0-13 week 11&12 Went well. She did bulk up a tad. But not much. They spent most their lives under a 100w. But, the bud is really dense all over. No larf, at all. Its a really good quality of bud I'm getting from both phenos. As far as ToppedVsUntopped well, that result is in. With a seeds used from the same pack (same parent) making true F1s as they need to be from the same batch. It why we all got different phenos, and those who ran more than 1, from their seeds, the phenos are very close. One of mine had more of a fade and looks more purple. Both smell very lovely & fruity. Nice trichome production with very dense but, rather small buds if I do say so. But the grade itself is very high. (As grade is not rated on size) overall both turned out very similar. Even fade wise, they've both developed a lovely colour finishing under high co2 environment with the SE5000 really has brought out a lot of fade i normally do not get. look at the start. It was only a few days under this light and the past 14 days they've both popped. I will also say. A lot of their life was spent under a 12-12 (3/5s of flowering). Topped VS Untopped pheno 2 & 1 Are very similar as I've stated this area will be filt in with harvest comments. Bud smell. How the dry went. And after a weeks cure. I'll rate it. So watch this space. These 2 phenos have been on just water for 10 days. I did a quick run off test. Got back 145ppm my tap is 110. So, they're good to go. Trichome wise. 95% cloudy 30-35% amber. (Hard to see, I'll try get pics with my scope) but, as you see. Both are fully ripened. Anymore and its just bud deg. Both plants leaves are showing end of life. Some are dying. (I'VE BEEN WATCHING THESE LEAVES AND SEEN THEY'VE BEEN DEAINED, ITS NOT BR) Lights The SE5000 was used for the Ripening phase. With high temps and co2 i pushed my boundaries and got a lovely fade reaction from doing so. How I know its down to this light as I've put my Runtz under it. And as soon as I did. It developed fade. My Frosted G even started getting light purple on its sides. The temp in tent has been pushed to 31-33c (that's not leaf temp as I've fans blowing on my plants, and that lowers surface temps by a few degrees.) They've been on 17hrs of high powered light. At 25-30cm id no choice. My temps are mad high this time of year. Harvested Both plants are been pult they're getting their last few hrs. You'll then see the last few pics in a few hrs. I'll get bud shots later, smoke reviews and then to be fair. I'll then mark it by the GD rating system. As I do with all my strains. (So I've 2-3 wk delay in my diaries as they're Harvested, mostly) both plants I'll try push them as far as I can through the drying process whole. But, as I'm dealing with high temps. Lower RH and a fastercl dry is pref to a longer dry in hot conditions might not make sense, but 30+ hot weather harvests, I've got this down. Mind you only this round all my other hot harvests some took a few weeks to rid the hay smell. This avoids it and locks in potency. Most of the drying is done by leaving the plant in the substrate just before the plant goes for itself for fluids. 4-5 day dry as opposed to 5-6 day dry with weed that loses half its stenght. (dry harvesting look it up) Thanks to James from RQS, although I know everyone and their sister got the offer for these seeds I am defo going to be trying more from RQS, if it's buying. I'll get round to it, and depending on the quality of smoke it might be soon. If its a real nice auto, I'd love to try a fem of theirs for my winter crop in October. But, that'll depend. I've lots I want to buy & try.. and when favs are found. I'll invest. I would like to thank everybody for the activity this diary has gotten. Its possibly one of my most active diaries I've done without a harvest. And that's in no short means down to all the views and likes from you guys. And for sure I will fully complete it, with results on the smoke Quality from both phenos, if it varies, but, results thus far, structure wise they're shockingly similar. Scary so. Topping has very little affect to the structure. She grew a main cola. But both phenos, turned puples I will say the topped one was a more troublesome plant. Maybe that had a role onin its morphology. And maybe it'll affect the bud also. The topped was more demanding nutrient wise, and drank more. Maybe to support a more even bud load. (I've yet to do a through inspection, but on the VS front, it's kinda in the air about quality, structure wise, it had very little difference. Look for yourself at the heights are 3-4cm dif) lots still to come. And I'll update it soon with more results. Again, thanks so much for the support, likes, comments and how active it is, an unfinished diary moving to my home page. 1st for me. So thank you. Also to my light sponsors who played a part in this grow. Although both phenos owe their bud quality to 2 x 100 watts SF-1000 (SE5000 was used for ripening lovely fade) and I used a P1000, they shared even light distribution in the end for the most part. So, thanks to Bella for the upgrade. I'm sure when I run an RQS strain again, this time I'll know only have the fade to show, but the bud size too. Thanks again my Friends. Updates pending as of 6th June. Edit June 7th Both plants are hung whole and drying 24hrs. I don't like how fast they're moving. The buds are already soft. Should still be hard at this stage only 30hrs in. They'll harden up in the cure no doubt. Let's just hope they don't shrink too much. Will give daily updates

March 11th. So its fact, one of Three Survivied Thats a Pity... but iam thinking about cloning The Survivor is a strong Little one... In 7 Weeks she will be a "Big Mama" Atm Iam setting up another "Babytent" with another Light... stay Courious... Iam finishing and actualising Tomorrow March 13th. Iam done with setting up Now i have another Babytent. and Inside the New Viparspectra XS-1000 and the other Stuff to run the Envoirement I already ca see a difference between both Tents. If you stand outside and just look with Eyesight the Viparspectra seems to be brighter// has another color of Light. I made a Unboxing Video for more informations. Amazon: http://url-9.cn/0y9i Amazon US: https://amzn.to/3e0P2bk Amazon CA: https://amzn.to/3bTnEJC Amazon discount Code: it10mlarimar XS1000 10% it15mlarimar XS1500 5% it20mlarimar XS2000 5% it40mlarimar XS4000 5%