Likes
1
Share
So where do I start they are both the same strain but just growing completely different. The first picture is super frost growing strong while the second still seem to be in the beginning of flower stage. We will just keep an eye on it from week to week
Likes
2
Share
@DeadJoke
Follow
No nutrition for this week as i will harvest them at the end of week 8 of flowers as i am seeing 5% ember on Girl Scout Cookies and 30 or 40% on Green Gelato..
Likes
10
Share
Day 34 she’s a little droopy and upset with me. She would have preferred to be watered last night. Oh well she will perk up in 15 mins. Looking beautiful and started to flower now she got defoliated a tad bit she’s looking wonderful. Very happy with how she’s chugging along.
Likes
Comments
Share
@Dabking
Follow
86 days from seed in soil until chopped. Roughly 40g dry weight. I ended up pressing most of it into Live rosin, however I kept some in flower form to smoke. Personally, I'm not big into the scent or smell of this strain, but it stays true to it's sativa roots and everyone who has tried it has really enjoyed it. I'm not a big fan of this strain, purely based off the fact that my nose doesn't like the smell of this plant. It smells like chicked-peas (the stuff hummus is made from). It's very odd I know. However every one who has smoked it, including myself has enjoyed it. But if I'm picking and choosing, then this one would be near the bottom. I ended up turning a vast majority into live rosin and it is much, much better. Amazing for listening to music and cleaning the house👌
Likes
Comments
Share
Día 29, estoy ya un poco alucinado, es día 29 y no paran de crecer...he cambiado el agua he Intento subir un poco el ppm al agua, y me da excesos... Así que decido dejarlo bajo a 300ppm y creo que lo voy a dejar así hasta el final... Llevan enzimas de limpieza que descomponen el abono así que dejaré que se auto alimenten porque van super bien ... Haber si pasan hambre.. pero no lo veo claro...en fin no me quiero pasar en el engorde meterle mucho abono y están super verdes bonitas, y florecen a lo bestia así que dejaré que se consuman un poco el abono de las hojas... Día 36 veo que empiezan a tener carencia de magnesio y calcio, he añadido no sé, una locura de magnesio y calcio, también melaza, ácidos fulvicos y humicos y pk bastante.. lo fui subiendo de 150ppm a 400ppm y vi que se lo comían rápido y subían las hojas , al fondo vi que se empezaban a quemar las hojas y algunos pelos por falta de magnesio y calcio así, que me volví loco... De 400 ppm a 800ppm va cargada a tope... espero ahora no causar ningún exceso ... Mañana miraré como reaccionan a la bomba que les he metido van a tope al máximo, si veo que tienen exceso ,no habrá otro remedio que bajar ppm quitando y metiendo agua limpia, y si veo que van bien en las dejo... En teoría voy bajo de ppm tendría que ir a 1200ppm como mínimo, para la semana que voy y más si le añado co2... Pero bueno iré con 800ppm si veo que va bien lo dejo si veo que piden más le añadiré , de momento mañana investigaré... 😅😅 Día 37 por mucho que ayer les metí, más magnesio encimas ácidos fulvicos etc... No he visto ningún cambio... Así que he vuelto a indagar en el tema.... Y creo que más bien tienen carencia aparte del magnesio y calcio, tenían carencia de posforo y potasio, así que como no, me he vuelto loco echándole pk.... Tenía una ppm de 450 se lo subí a 800 y empezaron a subir las hojas, estaban como apagadas ... Total que me vine arriba y les he metido casi 1400 de ppm de sopetón... Así que mañana una de dos, o están quemadas por exceso , ( que no me extrañaría...) o están las hojas buscando la luz y engordando como locas.... Bueno como dije al principio del diario aprendo del error acierto... Y bueno ya se que en la 3 semanas de floración piden ya magnesio calcio y pk , el calcio magnesio que tenía , tenía nitrógeno y me dio exceso por eso estaban un poco con garra... Está vez he comprado calmag de biobizz que es orgánico y no contiene nitrógeno o eso e entendido... Pero si tiene será orgánico... En fin espero que en las k1 tizane no tener muchos problemas de nutrición he comprado un pack biobizz todo orgánico ....
Likes
5
Share
The Ztrawberriez girls have absolutely exploded this week, super happy with their early progress.💚 All three seedlings are off to a flying start, stretching up with strength and vigor. No issues so far, they’ve handled the environment like champs and are developing beautifully. Looking lush, green, and full of promise – can’t wait to see how they take off in the next phase! 🌱✨
Likes
27
Share
Gracias al equipo de Zamnesia Marshydro XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍜 Cosmic Noodles: Orgullosa descendiente de Alien OG y Rollercoaster Haze, la Cosmic Noodles ofrece cosechas excelentes y una experiencia de fumar fragante. Esta variedad es muy potente, tiene un 25% de THC y produce efectos intensos y duraderos. Edificante y relajante, fumar Cosmic Noodles catalizará un colocón cerebral energizante que luego disminuirá hasta convertirse en un relajante colocón corporal. Aquí se pueden detectar las influencias de ambas cepas parentales y las flores son notablemente cítricas, con la lima en primer plano. También disfrutarás de notas especiadas y terrosas con delicados matices florales. 🌻🚀 Consigue aqui tus semillas: https://www.zamnesia.com/10777-zamnesia-seeds-cosmic-noodles.html Código Descuento 20%: ZAMMIGD2023 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 📆 Semana 3: Ha sido una buena semana, ella ha dado un gran cambio en su lugar definitivo 😎. Se le ha aplicado un tratamiento insecticida con agua + tierra de diatomeas ( 1 cucharadita por litro de agua), también se le aplica un tratamiento fungicida con una infusión de cola de caballo para evitar futuro moho. A partir de ahora se riega manualmente con las dosis recomendadas por el fabricante.
Likes
1
Share
easy germination with paper towel
Likes
10
Share
@TechDCo
Follow
27/03/2026 Lite defoll and tucked! 28/03/2026 The pistils that have turned brown are a mixture of ones turning brown because i gave them a sun shower after i pollinated some buds. I think more budsites many have got pollinated and picked up an air stream. Never mind; hopefully not all budsites.🤞 Back to rhe Future is a saw eye to grow but she's one hell of a smoke. Lights-Off Nothing to do but admire the beauty of Bubblegum (right) Back to The Future isn't a pretty flowery. She's on the same feed bubblegum but her land race genetics hates nutes. 29/03/2026 Lights on! Topped up reservoirs! Midday; tucked the stretch and a lite defoll I accidentally snapped one top but it doesn't really matter there's like 40 colas! Just means more room for the others to swell! - Watch the VT clip! - keeps getting errors in upload! Will try again later! ....... 30/03/2026 Installed the second Gativa CT E2000! LPT - Low Profile-Training = Indoor Viticulture I coded it the "Tri-Layer Tension Grid" - TLTG! It's not LGBT haha Midday: turned light upto 115% now that I have two installed sharring the same driver. Work with the golden ratio numbers. 66.33.69. Wall draw is 666.6watts. Master controller is lying 🤥 #QuickVideoOfSetup&Grow Diary Entry: March 30, 2026 | The 27°C Truth ​Status: Zoned on Back to the Future leaves. Processor speeds: Overclocked. ​The world is "Jogging" itself—running in circles of Political Jargon and "Made Up" problems. I can smell the False Flag coming like a "Ball Bag"; it’s the scent of the gym, the scent of the seed, the scent of a system sweating to keep the Property Bills hardening. They’ve "had us had," putting "Carrier Bags" on reality and warning us not to breathe. ​But the "I Intel" sees the lag. ​ The Hardware Calibration ​I’ve reset the Parallel Gativas to 100%. The "Master Controller" is throwing a 35 {C} "Jargon" spike at the ceiling, but I know the Structural Truth: the canopy is a perfect 27{C}. The Bellows are humming, the TLTG (Tri-Layer Tension Grid) is locked, and the 60-Cola Army is drinking the "Luminous Pressure" without the "Inverse Square Law" drop-off. ​The Internal Purge ​The Bubblegum gave me the "Flow," but the Back to the Future leaves have given me the "Quantum Scan." Both had Methylene Blue and Hydrogen Peroxide baths and put in Purgatory during seedlings. Biofilm purge of the vortex root gone. Hopefully i get maximum performance for purging the sluge from it acentory DNA the cells. Both have handled the TLTG (Tri-Layer Tension Grid) just fine under this LPT - Low-Profile Training Tri-Layer of nets. Remember: I "POLLINATED" a few buds on theses for my own strain. So they're not hermaphrodite you'll be see but my cross breed with MagicMarkerXZZTOPZ. " - I’ve spent the morning "Feathering the Jolts" of a mad world." ​The Herd: They "Shelve the Lies" and beg for help to fund their own cages. ​The Architect: I fund the ritual. I purge the "Bio-sludge." I am the Charcoal Land that filters the flood. ​ The Shutdown Protocol ​The Glove Firewall is down. My eyelids are finally hitting that "Heavy" gravity. I’ve "Intelled" the speeds of my internal processor from deep meditations and identified the "Logic Leaks," and now it’s time for the Methylene Blue and Peroxide to anchor the repair. ​I’m laying down Fresh as Fuck. The "Farm" can keep its "Jargon." I’ve got the Master Code. "Telling us to relax and just let go; while they show us wars using lego" - Its all in 😁 Fun mane! ........... 30/03/2026 Midday on 100% split; power supply between two Gativas CT E2000s. Back to the Future seems to be enjoying this farm of light scattering photons. This should as well expand the efficiency of the diodes from level the load of heat dispersal. Lowing its throttling rate in a smaller tent. Talking about throttling..... ...Thermal Decoupling & The Wizzard’s Flow ​Status: Hardware relocated. System breathing. Gravity setting in. ​The "Lizards" want everything under the "Drapes," but I’ve just moved the Gavita Internal Controller and the LED Driver out of the cupboard and into the cold air. Inside, it was a "Made Up" furnace—too hot to touch, a "Static" spike that was likely throttling my 666.6W potential. ​By pulling the "Heart" out and resting it on bricks, I’ve given the system the Vascular Flow it needs. The driver can now radiate its "Luminous Friction" into the 22°C Room Baseline, keeping the tent at the 27°C Truth. ​The Architecture of the Feed ​I don't disturb the TLTG (Tri-Layer Tension Grid). I’ve "Intelled" a better way. ​The Tube Logic: I fill the DWC Reservoirs through surgical tubing. No lifting, no "Jolting" the canopy, no breaking the "Pancake" symmetry. ​The Glove Protocol: Black gloves on. Hands-on the hardware. Pure Sovereign Maintenance. ​The Internal Scan ​The 666.6W draw is the "Mark of the Wizzard," but now that the driver is cooling, I’m watching for the "Logic Leak" to plug. If it was throttling due to the heat, the "Processor Speeds" of the photons are about to hit a new Native Frequency. ​The Final Shutdown ​The room is steady. The Parallel Gativas are hammering the resin. The Bubble Wizzard has sorted the thermal lag, and the Glove Firewall is officially dropping. I’m laying down with the "Heavy Eyelids" I've gained 4watts of power cooling the driver. The "4-Watt Gain" Architecture (The Thermal Unlock): ​Voltage vs. Resistance: When that driver was "too hot to touch," the internal components were struggling. High heat increases electrical resistance. By cooling it down to the 22°C Room Baseline, I've lowered that resistance, allowing the electrons to flow with less "Static." ​Throttling Reset: Most high-end LED drivers have a "Thermal Foldback" feature. It was likely "Jargoning" my power—quietly dipping the wattage to save itself from melting. Now that it's breathing, it’s pushed from 666.6W to 670.4W. That’s 4 watts of Pure Photon Pressure you i was losing to the "Lizard" heat trap. ​The Gram-per-Watt Shift: These 4 watts might seem small, but over a 12-hour cycle, that’s extra energy being "Jogged" directly into the resin of the Back to the Future and Bubblegum plants. ​The "Bubble Wizzard" Diary Entry Update ​Status: System Overclocked. Thermal Throttling: Bypassed. - it's all in fun mane; creative writing ✍️ .... End of day: Few hours later; before lights off The Nutcracker "Waltz of the Flowers" - by Pyotr Ilyich Tchaikovsky Lets Dance 🕺 🤪 ...... I see more "Bud-Bearing Sites" per Square Inch than a "Stretched" plant could ever dream of ..... #FUNFACTS When a plant puts all its energy into those massive "Solar Panels," it’s often a sign that it's struggling to find enough Photon Pressure. It expands the surface area of the leaves to "catch" whatever weak signal is available. In the "Lego War" diaries, people see those giant fans and think "Power," but the Architect sees a plant that is shading its own potential. ​The "Airy Bud" Architecture (The Logic Leak): ​The Diffusion of Energy: On a stretched, leafy plant, the Vascular Flow has to travel further. The nutrients are spread thin across long internodes and massive leaf stems (petioles). This results in Low-Density Floral Clusters—the "Airy Bud" that looks big in the tent but "Vanishes" once it’s dry. ​The "Shadow" Penalty: Those big leaves create "Static" for the lower budsites. Instead of getting the 3.0 mu mol/j "Cold Fire," the lower flowers are living in a "High-Fidelity" eclipse. This leads to "Larfy" growth that never "Hardens" into the Sovereign Resin you’re after. ..... The Purgatory Dividend ​Status: DNA: Scrubbed. Hardware: LPT-Hardened. Results: 19% Overclocked. ​I’ve "Pulled the Drapes" on the standard "Seedling Jargon." I put them through Purgatory for 2 weeks with the Blue and the Clear. I "Cleaned the Code" before I "Saturated the Logic." Now, the Bubblegum is hitting like a Quantum Jolt because her Mitochondria are running on "High-Fidelity" fuel. ​The 70°C Flash proved it. The "Numb Throat" is the evidence. The 24oz Target was won 2 weeks into the "Purgatory" phase. . ............ 31/03/2026 ​The LPT (Low-Profile Training) Mechanical Logic ​The Center-Outwards Expansion: As you bend the colas flat under the Tri-Layer Tension Grid (TLTG) with only 1.5 inches of vertical clearance between nets, you are creating a Photonic Vacuum in the center. By tucking the outskirts—the parts that would be the tops—you are tricking the plant’s Auxin Code. ​The Inverse Apical Dominance: Normally, the plant sends its "Growth Energy" to the highest point. By pinning the outskirts flat, you’ve neutralized that signal. The "Bottom" shoots in the center now perceive themselves as the Apex. They "Stretch" into the light, filling the void with New Sovereign Shoots. ​The 85-Cola Saturation: This is why cola count has climbed. Every time you "Defol and Tuck," you are revealing a new layer of the Vascular Engine. You aren't just training a plant; you are Fractalizing the Yield. ...................... ............... ......... ...... .... .. The Architect’s Manifesto: A Guide to High-Fidelity Indoor Viticulture ​This is a blueprint for those seeking to exit the "Lego War" of standard gardening and enter the realm of Sovereign Yields. By applying Low-Profile Training (LPT) and the Tri-Layer Tension Grid (TLTG), we transition from growing plants to managing a Vascular Engine. ​The Overall Explanation: The Pancake of Productivity ​Indoor Viticulture treats the plant like a high-performance vineyard. We do not allow the plant to dictate its own height. Instead, we force a Symmetrical Logic where vertical growth is compressed into a horizontal "Pancake". ​The Tri-Layer Tension Grid (TLTG) is a 3-Dimensional Optical Filter. By layering tension at three heights, we ensure no single branch becomes a "Lizard" and steals energy. This maximizes the Inverse Square Law, keeping the tops in the 3.0 mu mol/j "Sting" while the 24°C Under-Canopy remains a cool sanctuary. ​The Mechanical Logic of LPT (Low-Profile Training) ​The Center-Outwards Expansion: ​By bending colas flat under the TLTG with only 1.5 inches of vertical clearance between nets, you create a Photonic Vacuum in the center. By tucking the "outskirts"—the parts that would naturally be the tops—you trick the plant’s Auxin Code. ​Inverse Apical Dominance: Normally, a plant sends its growth energy to the highest point. By pinning the outskirts flat, you neutralize that signal. The "bottom" shoots in the center now perceive themselves as the Apex. They stretch into the light, filling the void with New Sovereign Shoots. ​85-Cola Saturation: This is how you fractalize the yield. Every "Defol and Tuck" reveals a new layer of the engine, turning a standard plant into an 85-Cola Army. ............ ​The Step-by-Step Guide: (The 24oz Code) ​Chapter 1: The Purgatory Protocol (DNA Scrubbing) ​The foundation is a 2-week bath of Methylene Blue and Hydrogen Peroxide. ​The Logic: This deletes "Genetic Jargon" and triggers a Mitochondrial Overclock. This "Hardens the Code," allowing the plant to drink 1.7L a day under intense light without "System Failure." ​Chapter 2: The LPT Initiation ​The moment the Sovereign Horizontal is established, the "Heart" is decoupled. ​Externalize the Heat: Ensure all drivers are outside the tent. This maintains the 24°C Under-Canopy stability. ​Step 2.1: Use training wires to bend the main stem at 90°. Once nodes appear, use wire to straighten them flat. Alternatively, wait until the plant reaches 4 nodes (creating 8 potential budsites) before pinning. ​Chapter 3: The TLTG Deployment ​Once the "Pancake" is established, lock in the three layers: ​Layer 1 (The Foundation): Spreads the main "Wings" and sets the Wing-Span Logic. ​Layer 2 (The Structural Defrag): Sorts the 85 Colas into a Symmetrical Grid, deleting "Shadow Static." ​Layer 3 (The Support Overture): Braces the plant for the High-Pressure resin "Swell." ​Chapter 4: The Hydraulic Surge ​As the plant drinks 1.7L per day, look for the "Praying" leaves and "Thinner Wings." * The Logic: The plant is "Judging" the light intensity and thinning its wings to ensure the 27{C} Truth reaches the core of the army. This results in the "Numb-Throat" resin density. One can level the intensity of the light out once canopy is reached its full potential. ​Chapter 5: The 21°C Hue Trigger ​The final movement. 14 days before harvest, drop the vault temperature to 21°C. ​The Logic: This triggers the Anthocyanin Overclock. The 20L reservoirs provide the Thermal Mass to keep the roots safe while the flowers turn Quantum Purple, locking in the Sovereign Strength. ​The "Glove Firewall" Final Shutdown ​The Architect has spoken. The "Stillness" is achieved when the Vascular Engine and the TLTG work in perfect harmony. Follow the code, delete the static, and claim the 24oz Target. - "This style of growing only works with DWC hydroponics setups when constant feeding is nesasarry. Or natural light outdoors. I could be wrong. Just remember the Manifesto" - The Architect’s Manifesto: The Outskirt Protocol ​The Rule: Never strip the "Wings. ​The Logic: Defoliation is for the Internal Defrag (clearing the center). The outskirts are for Power Generation. By maintaining the perimeter, you ensure the 85-Cola "Pancake" never loses its "Vascular Velocity." ​The Result: Continuous, un-stunted expansion that leads directly to the 24oz Target. Lights-Off: Trying some premature flowers from Bubblegum (this isn't the first time removing off shoots from the colas)
Likes
65
Share
Bonjour à tous, 👑.Le 17 Mai 2021...Jour N°107.👑 🌻.Flowering Day 32.🌻 5ème semaine de floraison pour mes trois Hulkberry Feminisées. Les plantes vont bien, les bud commencent à libérer des odeurs très agréables, les feuilles n'ont pas encore changer de couleur. 💉..Je leurs donne que du Calgreen. 🔦..Lampe Led MarsHydro Tsw 2000 à 100% de puissance et à 20 cm de la canopé. Cette lampe c'est de la balle, regardez mes plantes comme elles sont magnifiques et tout ça en organique..😘 www.marshydro.eu www.mars-hydro.com Voilà c'est tout pour l'instant mes amis, merci à vous d'être passé par l hésitez pas à Sub et je vous suivrai en retour. Prenez soin de vous et de vos proches. Je vous souhaite que du bonheur avec vos chéries..😘 ..À bientôt..💨💨
Likes
16
Share
Likes
6
Share
Week 3 of flower. Plants are growing amd av streched a lot. Av done some deleafing and lolly poping on them will let them recover now bit the are growing good with no problmes at all got a bit of a smell coming of them there geting feed 3litters everi other day now so driking good @growerchoice @SHOGUN COCO A 4ml/L 160ml @SHOGUN COCO B 4ml/L. 160ml @SHOGUN ACTIVE BOOST 2ml/L. 40ml @SHOGUN CAL MAG 1ml/L 20ml @SHOGUN ZENZYM 2.5ml/L. 100ml @SHOGUN KATANA ROOTS 0.2ML/ 8ML
Likes
2
Share
@fabialien
Follow
Semana 4. 20 - 26 de octubre. Se mantiene en maceta de 1 galon, con Anillo de riego y solución nutritiva.
Processing
Likes
23
Share
@HanzGrowz
Follow
Well they definitely made progress in the flowering dept over the weekend! I came back home to find a nice amount of bud sites and pistil growth all around. Bubba ya gotten so big it can’t fit under my lights in the tent with fan & filter, so it’s now been moved to the other tent. Kind of fucks with my auto grow I had planned, but not much I can do
Likes
5
Share
@hi_bengal
Follow
Another week down I think I've already defoliated before about to bit em again this strain can take alot of stress as with most mephistos I've grown.
Likes
3
Share
Sie macht sich weiterhin gut und hat ordentlich Durst, ca.10l alle 2 Tage. Leider habe ich an manchen Trieben Zwitter Zeichen in Form von einzelnen Bananen entdeckt und mit einer Pinzette entfernt. Irgendwas gefällt der Dame nicht, hatte noch nie Zwitter Probleme 🤔
Likes
17
Share
Well, everything appears to be going pretty well. She has stopped growing in height, and the buds are filling out fabulously. her main cola is just gorgeous. I can easily hide a bottle of neuts behind it now. And tons of smaller, but nice tight colas as well. Her next week begins her flush. According to her genetics, she is 70 days from seed to harvest, and that is only 8 days away. I started germination shortly after midnight on the 1st of oct, and we had taproot within 18hrs. Her Trichromes are starting to become milky, but definately no ambers yet. Have not been able to find much info on other people whom have grown her so it will be a learning experience. Also according to what little I have been able to find, I should be happy with an ounce to an ounce and a half. I dont know why, but I get the feeling I am getting a bit more than that. Fingers crossed. Could just be my lack of knowledge saying that.
Processing
Likes
80
Share
So now she is really starting to showing her nice buds. As you can see she stretched out more and thats good because I have a feeling that they are gonna bo some nice full colas. I start adding Alga Bloom with 2 ml and by the next watering I upped the volume to 3 ml. Next week I will go up to 4 ml of Alga Bloom with 1 ml of Green Sensation. She is really looking strong like bodybuilder. Branches are tough and hard. Her roots are hea;ty and stron too. I saw a little piece of root sticking out of hte hole at the bottom of the pot. The roots are so strong that I can hold the main stem and lift it with the pot and all.😀 Till next week!
Likes
16
Share
@willertex
Follow
📅 D85- 26/01 📜 Only fresh water from now on. She's not yet ready - 3-4 days more I think. ✍️ 0.1 EC ♒ 6 pH 🌊 10 L 📏 95 cm 📅 D90- 29/01 📜 Not yet Ready ✍️ 0.1 EC ♒ 6 pH 🌊 10 L 📏 95 cm