Run N1 Coffee Creamer X 50 Dragons

CannaNotion 🆙 Update March 28 🗓️ 🌰 Day 8 since germination in water cup 🌱 Day 3 out of the soil 💧 Each watering they needed has taken 1ml of Start-R from Mills 📝 We have taken May 25 as the start of the seedling phase for these Coffee Creamer x 50 Dragons from Ukhta Genetics, as that’s when they came out of the soil and already had perfectly healthy cotyledons. 💡 The LED panel is at 25% power and the roots are already showing beneath the pot. We are maintaining a relative humidity of 70% and a maximum temperature of 27ºC 📌 Once they have a decent root ball, around day 15 out of the soil (20 days old), they will be moved to a 2L pot. Transplanted to a 2L pot by day 10 of life (Day 5 out of the soil) to avoid losing growth.

CannaNotion 🆙 Update June 3rd 🗓️ 🌰 Day 14 since germination in water cup 🌱 Day 9 out of the soil 📝 Transplant to 2L done on May 30th. Watering alternated with fertilizer, 1ml of Start-R and drops of Vitalize mixed in 1.5L. 💡 The panel is still at 25% and the temperature and humidity fluctuate a bit, but they remain in optimal ranges. 📌 All three are developing well, but number 1 in particular is showing much more vigor in growth and development of the first sets of leaves. Although it's not how it starts, but how it ends!

CannaNotion 🆙 Update day June 10 🗓️ 🌰 Day 21 since germination in water cup 🌱 Day 16 out of the soil 📝 This week they have only received watering with dechlorinated tap water. 💡 The panel is at 40% and the temperature is starting to rise due to summer, but with a maximum of 28°C. We are keeping the humidity at 70%. 📌 Plant #1 shows vigorous growth, while plant #3 is moving a bit slower. Meanwhile, they look happy.

CannaNotion 🆙 Update June 17th 🗓️ 🌰 Day 28 since germination in water cup 🌱 Day 23 out of the soil 📝 We have started watering with fertilizer, applying 1ml CalMag + 1ml Basis A + 1ml Basis B per liter of water. This has been applied in all the waterings this week of growth, which have been 2. 💡 We have lowered the panel a bit since the tips of the leaves were curling up, and we’ve set it to 25%. The temperature is already rising due to summer, but with highs of 28°C, we are turning on the lights at night. We need to come up with something to better maintain humidity, as it’s starting to be a challenge to keep it stable. 📌 Plant #1 continues to show vigorous growth, while plant #3 is a bit slower. The number of internodes is the same in all, but it’s plant #2 that has the most branching. The internodal distance in plant #1 is significantly greater. Next watering will be with dechlorinated water, as we see some leaf tips curling up and we’re not sure if it’s due to temperature or a slight excess of fertilizer, since they’ve received two waterings during the week and both with nutrients. 💭 We’re still on the right track. We need to think about doing some training or apical pruning, as plant #2 shows good branching and we want to see a true 50-Headed Dragon.

CannaNotion 🆙 Update June 24th 🗓️ 🌰 Day 35 since germination in water cup 🌱 Day 30 out of the soil 📝 During week 5, they received two generous waterings with dechlorinated water. 💡 The panel is at 30% with a temperature of 26-27ºC and we are now able to maintain humidity at 75%. We installed an ultrasonic humidifier that we had in a box, and it can lower the temperature and raise the humidity in the grow cabinet. 📌 On 06/18/2025, we applied an apical pruning to plants No. 1 and No. 2, as the lateral branch development looked very interesting, and we decided to cut the tips and make a couple of clones to test all the possibilities this strain offers. 💭 Next steps are to do LST on the new branches of No. 1 and No. 2 so they grow parallel, and we might do another apical cut like mainlining to get 4 main branches from each. We will let No. 3 grow peacefully, or consider bending it a bit. 💭 No. 3 is growing well, although more slowly and with much smaller internodal distance. We are going to leave this one to see how it flowers on its own, without any intervention from the scissors. Onward!

CannaNotion 🆙 Update July 1st 🗓️ 🌰 Day 42 since germination in water cup 🌱 Day 37 out of the soil 📝 In the 6th week, we've applied preventatives with neem oil and diatomaceous earth, as some fungus gnats have entered the indoor space and a few yellow thrips. We need to stay alert on this issue and have applied foliar watering with neem oil and a tablespoon of diatomaceous earth to the pot twice. 💡 The panel is still at 30% with a temperature of 25-26ºC and humidity at 75% thanks to the ultrasonic humidifier. 📌 It's been almost 2 weeks since we pruned No. 1 and No. 2, and they have developed perfectly, taking on a very nice shape. The clones from the tips haven't rooted yet, but they look healthy. 💭 We haven't done any LST or a second apical, going mainlining with No. 1 and No. 2, and we've held back with No. 1, but we've decided to leave them as they are since the flowering cabinet is about to finish. We just need to harvest and clean everything perfectly, so in 1-2 weeks they will transition to flowering. We're giving them growth days without fear, controlling the size with 2L pots. 💭 No. 3 continues at its Caribbean pace. 💭 Next steps, continue preventing pests, cleaning the bottoms, and transplanting to 7L as the final pot and then to flower.

CannaNotion 🆙 Update July 8 🗓️ 🌰 Day 49 since germination in water 🌱 Day 44 out of the soil 🌺 Day 2 of flowering 📝 In this seventh week, several things have happened. We're continuing with neem prevention to avoid any issues during flowering. The heat is coming to our area, and we're around 30ºC, so we want to avoid any surprises with pests.

CannaNotion 🆙 Update July 22 🗓️ 🌰 Day 63 since germination in water 🌱 Day 59 out of the soil 🌺 Day 15 of flowering 📝 It’s been 2 full weeks since we switched to flowering and the stretch during the pre-flower phase has been good. We’ve cleaned up the lower area of twigs and leaves to have better access to the substrate for watering. 💡 The panel is already at 60% and we’re lucky because we’re hitting 27ºC at the max, all while growing at night. If the temperatures stay like this, we’ll harvest in early September with minimums of 20ºC, which will make these girls show autumn colors. 📌 There’s some thrips around that we removed by hand. For now, everything seems under control. 💭 All good for now, continuing with the nutrient schedule we’re applying and gradually increasing the intensity of the panel.

CannaNotion 🆙 Update July 29 🗓️ 🌰 Day 70 since germination in water cup 🌱 Day 65 out of the soil 🌺 Day 22 of flowering 📝 The stretch is over, and it's worth mentioning that plant Nº3 has caught up to Nº2 and Nº1. On day 21 of flowering, we did a not-so-severe defoliation, as the stretch has allowed light to reach all the buds well. 💡 The panel is now at 70%, and we're back to having highs of 30ºC when the light turns on at 21:00. Once night falls, it acclimates to 27ºC, even 26ºC, but we spend about 2 hours at high temperatures... 📌 Watering every 2-3 days with Mills nutrients, just a bit below the chart. Watering is alternated with dechlorinated water. 💭 We're doing well, next stage is fattening the buds. I should mention that we've had to turn on the Neutralizer, as the smell in the tent is considerable.

CannaNotion 🆙 Update August 19th 🗓️ 🌰 Day 91 since germination in water 🌱 Day 86 out of the soil 🌺 Day 43 of flowering 📝 We've been 3 weeks without posting anything due to personal circumstances, but we're continuing with this run of Coffee Creamer x 50 Dragons. In this post, we want to take the opportunity to apologize to UKHTA Genetics, as we haven't been able to give the best to this follow-up, due to the immense heat that has hit us in these days. This summer has been much hotter than last year, and it caught us with our pants down. Luckily, the heat is starting to ease and is stabilizing around 28°C, which is still high. 💡 The panel is still at 70% and we haven't wanted to raise it because there have been days with peaks of 32°C, and we were afraid of making things worse. 📌 Watering every 2 days as the plants are drinking a lot. In a day and a half, the substrate is lightly asking for water. 💭 We've struggled quite a bit with the heat, but the plants have acclimated and are producing a lot of resin, even on the fan leaves. The smell is strong, and we had to buy the Neutralizer, as with the heat we have the cabinet open during the light period and the smell is considerable. We hope the temperature continues to drop, and we can see an appropriate end to flowering given the circumstances. 💭 We've made some cuttings in 0.4L pots waiting for their moment, and we're also going to post updates on GrowDiaries to try this genetic from UKHTA Genetics again, as we've been surprised by its smell and amount of trichomes and to provide them with a better growing environment where heat won't be a factor. 💭 Despite the temperature setbacks, we are very happy with this strain. Totally recommendable.

CannaNotion 🆙 Update September 8th 🗓️ CUTTING DAY 🌰 Day 111 since germination in water 🌱 Day 106 out of the soil 🌺 Day 63 of flowering 📝 After almost 16 weeks (111 days), the end of this first run with this special strain has arrived. It’s the first time we’ve grown it, and we’re already fond of it because the smells during the process have been intoxicating. Towards the end of flowering, there were times it smelled creamier and sweeter, and other times a deep scent hit me, something I’ve never seen in many other varieties grown. It was cut at 63 days of flowering and had been on just water for a week. Number 1 started showing pink colors in the flower calyxes. It would have been much better if the temperature had dropped more in the final stage to see that color expression more pronounced. 💡 Finally, as I hoped and longed for, the temperature dropped, and we’ve had a few weeks of cool nights, so it has maintained a temperature of 26ºC with the light on and 24ºC off. The LED panel gradually increased to 100% over the last 3 weeks, which has helped a lot with the final fattening. 📌 We followed the entire Mills Nutrients chart, as always with a slightly lower dose than recommended, and there have been no over-fertilization issues. The leaves have stayed green until the end, so they’ve been fed as best as possible. It’s worth mentioning that we didn’t measure EC or pH throughout the grow, as the tap water in the area is of very good quality and weakly mineralized, and we control the Mills chart pretty well after years of use. This means that with meters, there’s a lot of room for improvement, and that will be the next step, as we’ve always had meters, but the cheap ones are broken in the drawer. 💭 These plants have been with other varieties in the flowering cabinet, and one damn OreoZ threw out some male flowers. We spotted them relatively early, as we monitor everything daily, and we quickly removed them, but it seems that number 1 has very thick calyxes... Let’s hope they weren’t affected. 💭 Here are some pics of the buds from these Coffee Creamer x 50 Dragons from UKHTA Genetics. 🎯 And here’s a link to these seeds if you want to try them. For us, it’s been a discovery UKHTA Genetics!! 🔗 https://ukhta420.es/product/coffee-creamer-x-50-dragons-fem/ We also leave a link so you can check out the Notion template we have for tracking our grows and never leaving anything out! https://payhip.com/b/EKU8C 💭 A pleasure and good smokes! See you next time, as there are several cuttings wanting to be transplanted!!

CannaNotion At Canna Notion, we create specialized templates in Notion to help growers, researchers, and cannabis enthusiasts organize their information efficiently. ✅ Optimize your management and take your knowledge to the next level. 📅 Organization and tracking for growers 📝 Notion templates to optimize your grow