Grow #1 - Garlic Budder - HSC

Eniac420 First grow in new setup! 5th grow lifetime; 1st grow with LED. I like Indicas. Have high hopes for this strain. Plan is to do a single-plang ScrOG in 2 x 2 tent. =================== One (1) fresh seed started in 80 mL distilled water + 15 mL hydrogen peroxide on heated mat with temperature controller set at 78 F. Seeds kept floating due to O2 bubbles (from H2O2) on seed. Occasionally "dunked" seeds with end of wooden toothpick to knock bubbles off. Shell cracked at 24h. Placed seed in (9-year old, but preserved) Rapid Rooter (RR) soaked in water. Seed located about 1/2" from top, with small piece of RR to cover opening. Placed RR in Mars 5-gal Hydro bucket. Top of RR flush with top of bucket, with clay pellets underneath. 3.5 gal tap water mixed with nutes shown. pH adjusted to 6.0, TDS = 370. Nute level level set 1/2" below basket for clay drainage. One air pump for air stone on continuously 24/7, then ran second air pump every 6 hr for 5 min to hydrate clay/RapidRooter. Light 9" from bucket on 4 setting. Exhaust fan speed control enabled to maintain 82 F. Lights on 24 hr. First leaves growing. Moved seed under left light bar for maximum light. Height is 8" above top of plant, power setting = 3 (30%) on controller. Distance and setting per Migro (manufacturer). Added water to set level 1/2" *above* bottom of net basket to encourage roots to grow into note bath. Oscillating circulation fan aimed at plant on speed of 4. Direction alternates between on plant and off. Minimal stretching; plant is about 1.5 inches tall at Day 7.