Chat
RecommendedRecommended

OPERATION EIHWAZ

41
6
852
5 years ago
Follow
Indoor
Room Type
LST
weeks 2-7
Topping
weeks 3-5
Defoliation
weeks 4-9, 11
19 L
Pot Size
1.89 L
Watering
Grow Conditions
Week 3
Vegetation
12.7
cm
inch
Height
19 hrs
Light Schedule
15+ conditions after
Login
Grow Technique Usage
LST
Technique
Topping
Technique
Commented by
CommanderCannabis CommanderCannabis
5 years ago
3-16 part 1. Very robust growth. I had to tuck the fan leaves under the growing lower stems so they could get some light and stretch. Leaf and stem growth has a good color to it and I will up the nutes by half a teaspoon and rotate Martha so she can get light everywhere possible. 3-16 part 2. After I came home from work What did I see but the top of Martha had been sliced off! it seems the metal tie-down stake was too tight against the resistance of growth and she snapped at the top. Its a clean cut and at the right spot. I raised the light to 24" in hopes she will stretch out abit faster. 3-21 VEG GROWTH ACCELERATING UP.
Similar Diaries
The emperor grows
3 weeks
The emperor growsMining_green
Auto Emperor J
3 minutes ago
My first Mystery Seed
6 weeks
My first Mystery Seedmikewhiskey
Mystery Seed
5 months ago · 4 comments
Ripper Seeds (Zake u. Shimo)
6 weeks
Ripper Seeds (Zake u. Shimo) MrTopshelfGrow
+1 strain
6 months ago · 8 comments
Sour diesel-growers choice
18 weeks
Sour diesel-growers choice InsideAz
Sour Diesel
a month ago · 3 comments
Purple Punch Auto
10 weeks
Purple Punch AutoBudinator
Purple Punch Automatic
4 months ago · 6 comments
Already a bad start
9 weeks
Already a bad startCriCer
Purple Haze Automatic
3 months ago · 5 comments
Mimosa
10 weeks
Mimosa Leonweed10
Mimosa
2 months ago · 12 comments
Grow Questions
CommanderCannabis
CommanderCannabisstarted grow question 5 years ago
I have a 1200W Veg/Bloom LED which is currently 20" above Martha. I am also LSTing her and am getting good solid growth from the lowest branches which are working to reach up. I am wondering if raising the light 4-6" and try to stimulate some vertical growth. Is this a good idea?
Solved
Techniques. LST
like
chasv77
chasv77answered grow question 5 years ago
Yeah depending on your grow area, the deflection angle (vendors do mak'em diff) of your LED lamps, a light that size should be up further at least 30".
CommanderCannabis
CommanderCannabisstarted grow question 5 years ago
I grow one plant in a five-gallon grow bag filled with coco coir. I water her everyday and on every third day I feed her with my nutrient solution. Everything so far has been good - growth, color. The pH and PPM of solution is 6.5/ @1500. What do you do when growing in coco?
Solved
Feeding. Other
1 like
Wicked_Stix
Wicked_Stixanswered grow question 5 years ago
Your plant looks great. The only thing I would suggest is to bring your pH to around 6. And also when growing in coco it is best to give feed with every watering since it is basically hydroponics. Good luck with the rest of your grow!
CommanderCannabis
CommanderCannabisstarted grow question 5 years ago
Using Coco coir as medium. Slowly adding more nutes to solution and my PPM is now @2200. Is that too high? The plant seem to like it but on my last grow things were fine until the third week of flowering then it got bad nute burn. How high can I go with the PPM?
Solved
Feeding. Schedule
2 likes
Wicked_Stix
Wicked_Stixanswered grow question 5 years ago
If you look at the Flora feeding chart the max ppm they recommend is 900 ppm. I suspect your ppm meter may not be working correctly because your doses don't seem that high. I would check the feeding chart on their website. You should never have to exceed those doses. Good luck!
CommanderCannabis
CommanderCannabisstarted grow question 5 years ago
Growing in 5 gal container of coco and am now feeding 2 quarts of solution a day with no run off. How often do you test the run off and how much solution do you pour in to get run off . I basically look at the plant to see if she is handling the solution. My pH going in is @ 6.
Solved
Feeding. Other
1 like
JinksyGrows
JinksyGrowsanswered grow question 5 years ago
Personally, I water to achieve a 10-20% run off (I use soil, however, but same principle). Taking your reads from your run off is pretty important... What we put in is not necessarily what comes out. That 6.0 may be 5.0 in the run-off if there's a pH maladjustment or many other factors, like poor microbacterial health, pathogens developing and so on. It's extremely important (in mine and many others opinions) to test your run-off constantly to ensure everything is Kosher. If putting in 6.0 yeilds a 5.0 result, lets say, it's your indicator that something's wrong and needs an adjustment. Left unchecked, problems will start to occur. Just my two cents. Good luck this week👍
CommanderCannabis
CommanderCannabisstarted grow question 5 years ago
My first reading (after pouring 6 quarts of water thru the coco medium) was over 4900 PPM. After another 6 qts it read 1995 and after a third round it read 908 PPM. This is my first time doing a run-off test, should the PPM be lower?
Solved
Feeding. Other
like
rhodes68
rhodes68answered grow question 5 years ago
Are you flushing with water or nuets? If water there is something in those pots you have to keep at IF these reading are correct. Runoff should be within a few hundred PPM in to out. Tap Water would be oh 100ppm-ish so your run off will be very low flushing with water. THe coco itself will give you 100ppm, so a water only flush would finish when the ppm hit about 200-ish. If you are using nuets to flush, actually that is a better way to do it unless there are problems, 900ppm going in having 1300 out would not be out of line. But 4900 is yeah thats really dangerous IF the reading is correct, they do get a little odd at high readings still it was high. 900 in 900 out is pretty much flushed. You should be ok BUT How did it get so high? Do you go to runoff each time?
CommanderCannabis
CommanderCannabisstarted grow question 5 years ago
Bud growth seems slower than last grow with same strain. Should I defoliate more or just be more patient?
Solved
Buds. Not fattening
like
MadeInGermany
MadeInGermanyanswered grow question 5 years ago
Hey bro :-) I would not remove any leaves :-) the plant looks great 👍 just a little dark from probably too much feed. But still great 👌. At the next pour I would only pour with pH corrected water and Ec to 0.4 with Cal / Mag, and the following times with a quarter Ec dose :-) then watch and enjoy 🙏🏻🌱😎
Comments
Login

Show by Week
Sort by
popularity
popularity
newest
oldest
Green_Dream
Green_Dreamcommentedweek 135 years ago
Some really nice bud development! 👍 Have fun harvesting 😉
xanado18
xanado18commentedweek 45 years ago
mine looked like that in veg - It’s gonna blow up in flower forsure. Good luck!!
Huggomadd
Huggomaddcommentedweek 15 years ago
Nice setup. Sending good vibes for your grow. 👍 LST is definitely a must with this little lady.
Jef79
Jef79commentedweek 105 years ago
Wow she looks smothered in crystals.. Well done she looks great sp far.. Keep up the good work n stay safe.. 👍🍀
CommanderCannabis
CommanderCannabiscommented5 years ago
@Jef79, thanks. i'm hoping to get some fat buds for harvest in another 4 to 5 weeks. Stay safe too.
SNoWfLaKe420
SNoWfLaKe420commentedweek 35 years ago
At this point I think it’s growing vertically as fast as it can when it starts reaching is when you should raise the lamp