Vitora It was done the topping technique.
Leaves started to yellowish the tips! I was not sure what was the problem. Then I find out it could be the light too close and the temperature too high (I dont know what the tenperature was).
3 likes
4 comments
Share
Used techniques
Topping
Technique
4
Week 4. Vegetation
6y ago
1/6
18 hrs
Light Schedule
6.3
pH
No Smell
Smell
650 PPM
TDS
8 l
Pot Size
0.3 l
Watering Volume
50 cm
Lamp Distance
Nutrients 2
Remo Micro
1 mll
Remo Grow
1 mll
Vitora Leaves turned yellow and brown. Thought it was probably the temperature too high (my hydrometer haven’t arrived yet), changed the light distance and airflow.
Did the topping cut.
The olders leaves started to die and to turn this yellow-brown color.
I thought it could be the temperature (I am about to receive my temperature hydrometer to measure that), or over/less watering, or nutrients.
The plant looked great a week before.
The wrinkle on the leaves and the browning leads me to think ya are on the right track with a heat issue. I'll assume there is a RH issue also that needs to be corrected. Try for around 70% at this stage. 🤘😤
Vitora I was away for 10 days. I set up a drip system, but the water didn't flow, so it was about 10 days without water. When I got back, the soil was pretty dry and the leaves were a bit droopy, but I watered with 700 mL and the next day the leaves were already looking better.
Now I have a hygrometer and the temperature and humidity seem to be in a good range. The problem with the leaves turning yellow was really the temperature, and with the distance from the fluorescent lights and moving the exhaust fan (I took it from the bottom and put it on top), it improved.
I bought a 100w LED panel, which should arrive soon.
2 likes
1 comment
Share
Used techniques
Topping
Technique
6
Week 6. Vegetation
6y ago
1/9
28 cm
Height
18 hrs
Light Schedule
28 °C
Day Air Temp
6.3
pH
No Smell
Smell
650 PPM
TDS
70 %
Air Humidity
25 °C
Night Air Temp
8 l
Pot Size
0.14 l
Watering Volume
50 cm
Lamp Distance
Nutrients 2
Remo Micro
1 mll
Remo Grow
1 mll
Vitora Replaced the two 45w fluorescent bulbs with the 100w LED COB that arrived on Thursday, 01/07. I turned on the humidifier for a few hours and there was a change in humidity and temperature from 28.5 Celsius and 63% to 26 Celsius and 82%. The plant is healthy. This week I will probably take some clones and change the light cycle.
3 likes
1 comment
Share
7
Week 7. Flowering
6y ago
1/10
40 cm
Height
12 hrs
Light Schedule
27 °C
Day Air Temp
6.0
pH
No Smell
Smell
900 PPM
TDS
70 %
Air Humidity
25 °C
Night Air Temp
8 l
Pot Size
0.12 l
Watering Volume
40 cm
Lamp Distance
Nutrients 2
Remo Micro
2 mll
Remo Bloom
2 mll
Vitora Change of photoperiod to 12h.
The plant is growing very well and some clones were taken that will complete a week. Hoping they thrive. :)
👊🏼👊🏼
Its been in floration for two weeks and the pistils are already showing, but now two little sacs appeared. Is this a male sign? It was supposed to be a feminized seed
Vitora She has been growing a lot and will probably end up taller than the tent, which is 1.20m high.
So, I made some ties to try to reduce her height a bit (for the next plants, I'll do LST earlier and not leave it for the end).
The ambient temperature is very hot since it's summer. The tent reached 32 degrees Celsius. I'm going to buy an aluminum duct to direct the hot air flow outside the room, so it doesn't return to the tent. I hope it improves regarding the temperature.
The plant has been drinking a lot more water in the last few days.
I'm really happy with my first results so far and counting the days to have the first buds.
Thank you for your visit, your comment, and tips.
3 likes
1 comment
Share
Used techniques
LST
Technique
10
Week 10. Flowering
6y ago
1/7
64 cm
Height
12 hrs
Light Schedule
30 °C
Day Air Temp
6.0
pH
Weak
Smell
720 PPM
TDS
60 %
Air Humidity
26 °C
Night Air Temp
8 l
Pot Size
0.29 l
Watering Volume
22 cm
Lamp Distance
Nutrients 2
Remo Micro
2 mll
Remo Bloom
2 mll
Vitora The plant is growing well.
I had a problem with hermaphroditism last week and removed the few pollen sacs that appeared (3) and the problem stopped.
This week I watered twice with 2L.
(1 L ppm 700 - 35 drops of remo micro and 35 remo bloom + 1 L water pH 6.3)
2 likes
2 comments
Share
11
Week 11. Flowering
5y ago
1/4
65 cm
Height
12 hrs
Light Schedule
29 °C
Day Air Temp
6.0
pH
Normal
Smell
700 PPM
TDS
60 %
Air Humidity
26 °C
Night Air Temp
8 l
Pot Size
0.29 l
Watering Volume
20 cm
Lamp Distance
Nutrients 2
Remo Micro
2 mll
Remo Bloom
2 mll
Vitora Plant height: 65 cm
Total height: 85 cm
Waterings:
07/02/21 500 ml 700 ppm
08/02/21 500 ml 700 ppm
12/02/21 1500 ml pure water pH 6.0
I went on a trip, so I did this bigger watering. As I asked here, there are some lower leaves that are a bit burnt and it might be overfert, so I decided to use pure water.
The odor is becoming noticeable, so I bought a small carbon filter that will arrive next week.
Vitora This week I stopped adding fertilizer to the watering.
02/22 500 ml 776 ppm 5.5 ph
02/24 500 ml 776 ppm 5.5 ph
02/25 1000 ml water ph 5.6
02/26 500 ml water ph 5.6
How much longer do you think until harvest? 🍀
So far so good keep up the amazing progress. Let the big frosty buds begin. I hope for strong happy and healthy grows. Good luck stay safe happy growing cheers!!!!
bro, I recommend you get a hygrometer so you can better understand the temperature inside the grow room, which is very important. anyway, you're doing a great job... congrats and happy holidays!
@Boldinho, thanks brow. I already bought it and it will arrive soon.
I will post the next weeks pictures cause the leaves got worse. But than I changed the light distance and airflow. When I get the ingrometer I will post more information.