Likes
Comments
Share
😎MARSHYDRO LED😎 Defoliation 3rd week flowering for better light 💡 penetration & air movement
Likes
Comments
Share
She seems to be overfed, showing yellowing here and there. I might have messed up the Ph because I did not adjust fhe ph of nutrients mix. I assumed it was ph corrected. Now, I am adjusting the Ph and reducing feeding. Let’s hope that she recovers next week.
Likes
20
Share
@m0use
Follow
They are getting nice and stretchy. Can see some interesting growth traits between then all. Tent is a bit to crowded for my linking but they are 8 plants crammed into a 2x4 so don't know what I was expecting. They are doing well and next week I will be getting a buddy to take care of them so curious to see how they look when I get back. Made it stupid simple and feed them a bit more this week in hopes the remainder will carry on over to next week and be fine. Might also mix a bit of amendments into the stop layer so it just gets a bit more into it. nothing else to report. Temps and RH are doing well with the extractor. Place has been kinda dry so its working in the tents benefit. noticed some calcium like issues on one lead and found it odd as I amended a good amount of Ca into the soil and its only on one of the leaves. Might just be something else but something to think about while I am gone. Will get my friend to send me some pics of everything to make sure its going well. I also noticed the PH of the feed I give is around 5.1 for whatever reason it is quite acidic but does not seem to bother the plants to much. I know if I fed that kinda thing before I would have ran into issues. *Small Update, I top dressed with a bit of Gaia Green Power Bloom 2-8-4 "found a small amount in an old bucket" and some super fly insect frass of 3-2-4 and a bit of rock dust for extra Ca and some micros. I mixed all this stuff up and gave each bucket a heaping 1tsp/5ml of the powder mix. Normally the recommended dose is 1Tbsp/15ml per Gal. and the container are 2Gal. so its getting a very light dose. This will hold it over with everything else that's in the medium. Till next next week.
Likes
13
Share
E andata da DIO! Questa genetica mi ha letteralmente reso l'uomo più felice della terra😂 i suoi colori sono strepitosi e adesso che ho iniziato il flush abbasserò anche la temperatura di 2-3c in modo da fare uscire ancora più colori😇.... E veramente una varietà spettacolare questa di Fast buds e mi viene l'acqua alla bocca solo a vederla! Ho intenzione di lavare per 7 giorni minimo anche se il substrato è di cocco ma vorrei cercare di avere un prodotto finale veramente pulito (anche se ho coltivato organicamente)....ci vediamo alla prossimo aggiornamento e ricordatevi di aggiungermi su Instagram curati_da_solo🌱🌈💫 Volevo ringraziare BAC per i suoi prodotti da urlo! E spero di poter usare tutta la linea nella prossima coltivazione così da avere risultati ancora migliori! Peccato che non ho avuto un calmag il PROACTIVE e il silicapower ...perché penso che se avessi avuto una tabella più completa sarei riuscito a fare ancora meglio! Ma mi interessa fare vedere che sonusare i loro prodotti così forse posso avviare un progetto più serio con loro! (Prossimo progetto a brevissimo 😇) Vi lascio al prossimo aggiornamento per il taglio! Spero che piaccia a tutti FAST BUDS SEI SPECIALE!🌱🌈💫
Likes
92
Share
@Targona
Follow
68 days since my little girl sprouted from seeds🌱 Eleventh week of growing my SUNSET SHERBET AUTOMATIC 🍨🍨🍨 Nutrients: For the POWER BUDS Contest – Zamnesia + Plagron (seeds and nutrients as sponsorship) Nutrients: During this period I only add flushing - Advanced Nutrients Flawless Finish - For plants, rinsing is very important to get rid of pollutants, fertilizer salts, toxins and other harmful substances, so your harvest smells better, tastes better and therefore commands a higher price 😋👌 Advanced Nutrients Flawless Finish is the only product that is completely safe for plants and very effective 💚⭐ Supplement for more efficient flushing of the substrate from fertilizers in the final phase 🌾💓 It contains powerful cleansing ingredients called EDTA along with special ingredients like citric acid 🍋 and magnesium sulfate. It can also be used in case of over-fertilizing the plant 💩 It is also suitable for hydroponics and aeroponics 🌴🌿 -------------------------------------------------- -------------------------------------------------- ------- In general: SUNSET SHERBET AUTOMATIC 🍨🍨🍨- The girl's leaves are completely yellow and dying 🍂. I think the girl didn't handle the ph 😥 somehow I couldn't keep it right despite using Biobizz PH regularly- 😕 Her main cola has really grown a lot, she is strong, massive 🏵️🌸. I will definitely harvest it this weekend 💚 Unfortunately I got mosquitoes/Sciaridae dark mold in my tent so I planted yellow sticky rosehips and sprayed the plants with homemade nimbus oil spray which is organic Training: Since the girl grew like this, she doesn't even have many leaves and her branches are automatically shaped the way they are, so no extra training, I just removed some yellow and dead leaves 🌞💚🍂🍂 Buy seeds on Zamnesia Seeds website with discount code: ZAMMIGD2023 - 20% off ⭐⭐⭐⭐⭐⭐⭐ https://www.zamnesia.com/ 👆👆👆👆👆👆👆👆👆👆👆👆👆👆👆 Light: Mars Hydro TS1000 The plants respond effectively and the light is technically very well managed - I try to have 50 cm between the light and the plants, so I move it up regularly. But with this plant, the gap between the tip and the light is about 5 cm 💡💡💡 Thanks for the likes and you can follow me on X / ❌: @ Targona666 See you soon 😍
Likes
13
Share
So as you can see I now have four flowering which I guess were the autos and I have one gelato that is still vegging and is doing damn good. There are two that have lighter color leaves, I’m trying to focus on on these and see if I can get better production. As for the tall GG in the back, leaves are waxy and have resin production starting. A lot better, overall I’m learning more and more every week! Hope everyone is enjoying my grow and stick around, ask questions. Happy New Year!
Likes
8
Share
So I stopped topping this week to see where the tops are at on these plants, and after seeing the explosion of growth after the 1 to 7 gal transplant, I think these are good to go! I’m waiting on switching to flower until I plant and germinate my next run, which will be in about 2 weeks. Also debating on running clones of these if I see any I like during the flowering stretch. I had to instal a carbon filter yesterday, Oct15, as my mother in law said it smells like a skunk sprayed the side of my house. Didn’t think I would need to until flower, but I guess it’s expected with this many plants! Steady growth, and slowly shifting nutrient amounts up, get ready for some buds!
Likes
35
Share
@BigDaddyK
Follow
Looks ,, lovely , Dragon force started Sunday 5/1/20
Likes
6
Share
Hey guys . My cutting heating broke 3-4 weeks ago, which was fixed immediately and everything went wonderfully. Now, 3 days ago, the central heating broke down in the entire room, so that at night I only have temperatures of around 13 degrees :-( . One or the other lady is slowly starting to see a phosphorus blockage, as this can no longer be absorbed at temperatures below 15 degrees, like many other nutrients :-( . A friend looked at the heating yesterday and came to the conclusion that a real company had to do it, which is by no means possible for a stranger to enter my room. I quickly ordered heating mats for all the boxes so that the ladies could at least get warm feet. That's all I have this winter full can do . Let's hope everything will be fine 🙏🏻. As soon as the heating mats are attached in the coming days, I will post them in the pictures. Now for the update. Despite the severe cold, the ladies are still doing well and have made good progres . The ladies only had to be watered once this week, each time with 1 l, because it absorbs the water very slowly because of the cold and I don't want to overwater it. I took every single plant in the pot to take a close look at their roots. These are snow white and look very healthy 🙏🏻. It was also the last time neem oil sprayed so that the last trips are finally gone. Otherwise everything was checked and a lot of planning was done, like I do with the heating mats. Since a friend had the same problem in one winter and the heating mats got 10 degrees plus on the pots, I am very confident that it will at least bring something for the last cold month 😃 🙏🏻. I'll start flowering tomorrow by switching to 12 / 12 h because the ladies mustn't get too high because the small flowering tent is only 160 cm high :-) until then have fun and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Strain at https://pcg.international/shop/pcg-int/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany
Likes
10
Share
@Lazuli
Follow
Preflowers show up ill remove the lst next week and let them go I still only give hard tapwater everytime the soil feels dry the soil was fertilized for 100 days, this week runoff comes out at around 2000ppm
Likes
4
Share
3x3 TENT HARVEST UPDATE - all four girls started from clone were harvested after trichome check of mostly cloudy with 15-20% amber (after only 42 days from switch). Harvested on 12/3 and jarred after 8 and 10 day dry times. Roughly four ounces of some really sticky and stinky buds. So, while girls were not big producers, the quality is primo! Glad I took cuttings of the G-41, Frosty Gelato, and Black Cherry Gas. These are the first additions to new mother tent. 2x2 Tent (8 clones and 1 Afgooey Auto) - During the week clones began showing signs of revegging. Should be ready to transplant by weeks end. Afgooey is just now starting to pre flower, which is completely opposite of her two sisters, which only vegged 3 weeks before going into flower. Gave her a good defoliation, since she is squatty, bushy and generally growing more like a true indica. Transferred clones and Auto to the 3x3 tent at weeks end. 2x4 Tent (French Macaron WK5F) - Dealing with huge Ph swing in an organic soil grow. Ph reading below 5. Began ph'ing at 7.0 - 7.5 to slowly adjust her back to normal. Transferred the two Afgooey Autos into 3x3 tent at weeks end. 3x3 Tent (3 Afgooey Autos WK3F & 8 clone varieties) - Transferred all three Afgooey Autos under Mars-Hydro FC-E3000 set at roughly 75% or roughly 500-600 PPFDs. Transplanted 8 clones from dixie cups to 1 gallon pots with PPFDs roughly 300-400. Ph'd and watered autos and clones.
Processing
Likes
32
Share
@DeaneR
Follow
All the girls are coming along nicely. Pro-mix is furthest into flower, followed by Coco, then 50/50. The pheno in the 50/50 mix is still throwing out alot of pistils. Just ph'd water from now till the chop. Thanks for viewing, Stay tuned (up), more to come! Peace, DeaneR😎
Likes
19
Share
@Herbie
Follow
Never think "Oh she looks like a cabbage" "She's a little mutant plant" "She'll never make it" Because if you do you'll be wrong..... This little cabbage mutant that was never going to grow could well be my biggest haul to date.
Likes
8
Share
@Kirsten
Follow
16.4.25: As mentioned last week I top dressed with a mix of canna terra plus dry amendments. The soil is very waterlogged and, as a result, has started to grow some mould/mildew on the top layer. I decided to scrape off as much mould as I could, then redress by mixing in some coco and perlite. This should aerate the soil, and prevent the water retention becoming excessive. 23.4.25: I hope everyone had a great 420! HulkBerry has grown significantly since last week. She is now exceeding the perimeter of the 8 Gallon pot. The leaves are looking good to me. It's not too dark, but still luscious in appearance. I have barely given any water, as unfortunately I had overwatered when I top dressed. The top dress was not my usual substrate and, unfortunately, ended up growing mould on the surface. I removed the top soil to take away the mould. Then I replaced it with 2 Inches of Canna coco and perlite 60/40%. I did not add any amendments to this. Nutrients; Cal-Mag amino acids and Ecothrive Biosys. I watered 2 litres yesterday, and today, I am going to LST for the 1st time. It needs to be done ASAP now, before she begins to flower. I'm just aiming to open her up and keep the tops at an even height. I'm happy with this plant her structure is lovely, and uniform. Which I hope to maintain. Thanks for checking out my diary and hanging out 🍃✌️💚😊🌱
Likes
18
Share
Seedsman Seeds Germination Report - Run 01: The White OG Journey Kickoff to Germination: The Start of Something Great! Welcome to the beginning of this adventure with The White OG feminized seeds from Seedsman Seeds. Excitement is in the air as we’re searching for strong, resilient plants, and this journey has all the best tools and tips. Starting with five seeds, we’re aiming for a solid beginning and maximum potential. Let’s explore every step in detail to make this grow as robust as it can be! Germination Process: Tools of the Trade TheCannaKan: The Ultimate Germination Gadget I’m thrilled to share my love for TheCannaKan, a little germination wonder! This tool is essential for any grower who wants to start their seeds with precision and care. I noticed rapid results in just 24 hours, with the seeds showing signs of life. At about 32 hours, I transferred them to the Root Riots, which brings us to the next exciting stage. Why I Love TheCannaKan: • Quick Results: Seeds sprouted rapidly, minimizing wait time. • Consistency: Keeps moisture levels optimal for uniform germination. • User-Friendly: Simple yet effective for both new and experienced growers. Root Riots and Their Role in Root Development After sprouting, I placed the seedlings into Root Riot cubes under a dome. Root Riots are fantastic for stabilizing young plants, providing an airy and nutrient-friendly environment that promotes robust root growth from the start. Benefits of Root Riots: • Root Aeration: Soft yet structured, these cubes support root expansion. • Moisture Retention: Holds just the right amount of water for growing seedlings. • Enhanced Root Health: The cubes are ideal for preventing damping-off and ensuring healthy, white roots. Nutrients to Kickstart Growth: Aptus Holland Regulator and Startbooster To give the seedlings a perfect start, I added Aptus Holland’s Regulator and Startbooster (1ml/L each). This mix promotes early root and stem strength, giving seedlings the ability to absorb light and nutrients more efficiently. • Aptus Regulator: Enhances plant resilience, aids in nutrient absorption, and promotes early vitality. • Aptus Startbooster: Adds a balanced mix of growth hormones and nutrients that are ideal for the early stages, encouraging healthy roots and faster seedling growth. Light and Environment: Future of Grow FOG LED with TrolMaster Tent X Controller I’m using a Future of Grow (FOG) LED at 600W, but keeping it dimmed down to around 200 PPFD. This setting is controlled by the TrolMaster Tent X Controller to give the plants the perfect start without overwhelming them with intense light. Controlled lighting helps seedlings to develop without stress, encouraging healthy growth and internode spacing. Shoutouts: • Future of Grow LED: High-quality, efficient LED light that adapts well to seedling and veg stages. • TrolMaster Tent X Controller: Reliable and intuitive control over light, humidity, and more. Perfect for a hands-off, efficient environment setup. Observations: One Seedling Takes the Lead At the end of this germination stage, it looks like one seedling has emerged as the strongest, while the others may need a few more days. Patience and observation are key; some seeds naturally take a bit more time to sprout. I’ll keep monitoring these with hope, allowing each seedling its own rhythm. Grower’s Notes and Tips • Consistency Matters: Germination is all about steady conditions—consistent moisture, gentle nutrients, and stable lighting make all the difference. • Document Everything: Keeping a log of each step (like this one!) helps track growth patterns and provides valuable insights for future grows. • Stay Positive and Patient: Not every seed will sprout at the same rate. Trust the process and remember each plant is unique. Community Shoutouts Thank you to everyone who makes this process smoother and inspiring—TrolMaster, Aptus Holland, Future of Grow, and Seedsman Seeds for amazing genetics and tools, as well as the growers’ community who share insights, tips, and encouragement along the way. Next Steps Now that we’re through germination, we’ll move into the early growth phase. I’ll keep documenting the lighting adjustments, nutrient changes, and growth patterns of each plant, especially that eager seedling leading the way! Growers Love, and here’s to a strong start for the future of this grow! 🌱 DISCOUNT CODE - SeedsmanSeeds - DOGDOCTOR 10% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚

 Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All and remember to keep that smile big and alive 💚
Processing
Likes
141
Share
@Eyeduno
Follow
Flushing the one plant this week and the others next week two week flush then
Likes
27
Share
@Dunk_Junk
Follow
Wow she looks gorgeous this week! A proper mini weed plant 😂 😍
Likes
42
Share
Harvest time I decide two hang the entire plant for a slow drying !! I finally removed the plant to much humidity it was around 80%😥 it’s raining hard those days anyway I checked every buds and no mold so I switched to my old method . 📦 humidity now it’s 55% 👌 5 days of drying I try to keep humidity around 60 and 17 degrees to keep all terpenes n flavour, terpene don’t like low humidity ,heat ,and of course lightning ,see y’a next update 💪💪💪 I had 34g of nice frosty trim ,for the first time I’ve made some nice bubble hash amazing I love it!!! I watch all of he’s videos he was the marster of hash RIP French cannoli 🙏🙏🙏
Likes
35
Share
OFFICALLY BANNED FROM COMMENTING..GROW DIARIES NEED TO CHECK THERE JEALOUS 3RD PARTY EMPLOYEES MR RO-@#×! GO FUCK YOURSELF PUNK Im convinced they are people so jealous of my progression .. 20 diaries with 41.000 likes.. Its called interacting . helping when possible. I have no secrets with growing.. Anything i do i love when others do it also.. Unlike people who guards there technique 😂🤣😂🤣.. Well everyone can grow beautiful buds THERE is no secrets... If u have secrets then YOU ARE a cheater..grow diaries refuse to inform me why im blocked.. So i would LOVE to take this time to brag in his fucking face ahh ah ah 41.000+ punk.. MY FRIENDS i cant reply to your questions.. Thank you all again for your awesome support. It really means a lot to me
Likes
16
Share
@Wakesk8
Follow
Some cal mag issue in my opinion but balance everything is fine !! Flowering stage is going on pretty good 👍