Growing still

Will definitely grow this stain again if the opportunity arises, she gave me should dense nugs which smelt amazing!

Week 3 In the beginning of Week 3 I used 1/2 teaspoon of Grow Big which was a mistake! They really just needed to be left alone! Showed the tiniest bit of nute burn on the tips and when I saw that I went straight to checking PPM which was at like 1500 (yikes) and flushed until I got it down by 300 ppm. Should have waited until the 3rd set of leaves to feed! Luckily it was caught early and they are flourishing with no further issues. The side lighting from the T5 bulb really seems to be helping. They are really going along nicely, here's hoping I can get them through the net few weeks in the same fashion :) Moved the light down from 28 inches in the beginning to 17/18 inches by the end of week 3. The plants seem to love it and aren't showing any signs of heat/light stress

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

07/13/2025 - Day 105 Short Facts: - 75cm tall - VPD @ 1.0 - Fungus gnats and thrips are still there - predatory mites are deployed to the battlefield (the soil!) - green lacewing larva are also deployed and are placed on the card near the outbreak ------------------------------------------------------------------------ Well, she’s developing, but it seems like she’ll need more time than her sister, because the buds are still quite small. However, she’s starting to show some really beautiful deep purple leaves around the flowers. She might turn out to be quite stunning when she finishes. Unfortunately, she’s now also infected with thrips and more than I had seen the week before. I hope the green lacewing larvae will do the job, but just to be safe, I’m going to order more this week. The fight is on! I also uploaded some pictures and a video of one of the leaves they’ve basically destroyed. Really sucks that this is happening so late into the grow.

Actualizamos familia, con la tercera semana de floración de estas Sherbet Jedi Joint de HighBreed. Gracias al LST arrancaron a crecer bien los satélites y va pareciéndose a un arbusto, tienen un color bien verde sin carencias por el momento y se ve que están sanas, las plantas están en macetas de 7 Litros definitivamente, con tierra top crop, con una altura similar a 55/65cms. Como los anteriores cultivos tuve visitantes(trips) estoy rociando aceite de neem y jabón potásico 1 vez a la semana, añadí también tiras de color azul / amarillo para prevenir y controlar mejor el tema plagas. El riego que aplicamos son 700ml de agua cada 48 horas y el ph se controla en 6.5, la temperatura la tenemos entre 22/25 grados y la humedad ronda el 55% gracias al humidificador. El mismo día que escribo esto el foco está al 100% de potencia. Me gusta subirlo muy progresivamente, las manías. - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com - los nutrientes directamente desde https://agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨

Permanent Marker I have to say this might be my favorite strain scent and appearance I have ever grown. This thing is F*ckin INSANE it reeks of diesel, skunk, chemicals, sharpies and acetone it’s seriously something I wouldn’t expect a plant to produce. I’m hoping that scent carries through after drying and curing. She has bulked up nicely the buds were falling over I had to tie them up to keep them upright. Removed some big fan leaves and a few that were covering lower bud sites. Pistils are completely receding dark orange, been flushing for a week now as I’m expecting trichomes to ripen more before harvesting! WISH I WOULD HAVE TOOK A CLONE FROM HER UGH 😩..perfect for breeding with another perfect strain’s pheno!

Week 3 flower she's been drinking alot, so keeping her water reservoir full. I should top dress but am gonna finish her without top dressing, I believe the soil is healthy enough to do the job,🤞

At the beginning of week 2 the plants have grown fine, but also developed some yellow leaf-tips, which I assume is from the amount of light they receive. Therefore I decide to hang the both LED-fixtures higher. The LUMATEK ZEUS PRO 600W is now at 75 cm distance and the two SANlight Q6W-Gen.2 are at 90 cm distance from the top of the clones of CANNALOPE HAZE from DNA-GENETICS. The humidity inside the HOMEBOX-tent is kept permanently at 60% during veg. The grow-controller GROWBASE PRO from GROWCONTROL does a GREAT job in keeping a constant environment inside my growtent. As a precaution I put up some yellow sticky traps against fungus-gnats and also hang sachets with predatory mites from KOPPERT (=Thripex PLUS) on every plant. This will prevent spider-mites and thrips to invest my tent, since the predatory mites will eat them right away. I LOVE BIOLOGICAL TREATMENTS and decide on it every time instead of using chemicals, because I grow my own medicine here and dont want ANY CHEMICALS on my cannabis! 👍😎 At the end of week two I slightly increase the light intensity again, by adjusting the dimmers of my LEDs. The Lumatek is now set to 50% dimm-level and the SANlights are running at 60%. Until now there is not much difference to see between the two sides, all plants are healthy and doing well.

14.5 - Week 13 is behind us. Unfortunately I found one bud with mold on the Blue Gelato 41 as well, so I had to act fast. Watching the plants get more mold day by day didn’t seem like the best plan, so I harvested the tops from those two plants right away. The last Super Boof — a.k.a. the ‘wide‑legged lady’ — took full advantage of the new situation. I flipped the circulation fan upside down and hung the light at an angle, so she basically has no lower canopy at all. This plant looks like: ‘I’m ripe, but I can easily stay here another month.’ I don’t think mold is a threat for her, so she can chill there for another 2–3 weeks if she wants. Since Tuesday she’s back on bloom nutrients. I mixed her another 10 liters as a farewell gift… Honestly, I don’t even know what a perfectly ripe Super Boof is supposed to look like. Back in my younger days, weed looked completely different.

Hey Cannafam Happy Monday, My Apricot gal has had another pretty good week. Absolutely no rain again and just dry mainly Sunny days. This has been the best year by far that i can remember in the UK, but as nice as it is for weed wild fires are now happening over here and to a greater extent in France and Spain. My thoughts and prayers are with our European neighbours and anyone on GD affected by this 🙏 The weather has been not as hot but stable and warm, Tuesday - Friday temps have been bang on 25c daytime and 15c nighttime with continuos Sun and things dipped a bit on the weekend and today at 23c daytime with a bit of cloud and 14c night which overall has been more favorable for her. Humidity has remained again in the 70s averaging 72% and daylight hours are at 15 hrs 30 minutes. This gal has been changing colour further during the week with the beautiful purple hues coming out in her leaves and some in the buds. Her flowers are coming on nicely and absolutely loaded with trichomes shes super frosty 😊 Shes just had the 1 feed again this week again and although she has yellowing leaves somd were the scorched one and some are gettin that fade so it feels right for her, alhough i may a slight boost of pk next watering. Her Smell also has changed this week, shes gone from socks to a sweetish candy smell. Bud development is good and shes now started the maturation process. Her flowers are also looking very solid, so shes gonna deliver some hard frosty nuggets 😁 Thats all from me for now, thanks for stoppin by ✌️💚

Buenas tardes a tod@s aqui estamos para las actualizaciones semanales con mucha energía. Como se puede ver esta semana las plantas han crecido aumentado así su tamaño casi 5 cm por planta , esto nos pone realmente contentos porque significa que los cambios han dado su resultado.🌱💀 Como hemos comentado hemos realizado algunos cambios. Esta semana hemos aumentado los mililitros por planta a 400 ya que nos pedían agua cada dos días siempre bien equilibradas de PH a 6.0 En el tema de nutrientes al ver que en la anterior regada les fue bien seguimos con los mismos e iremos aumentando de forma paulatina a medida que las plantas vayan creciendo. Queremos agradecer a todos la atención a nuestros diarios y que aquí seguiremos para que todo fluya lo mejor posible. Buenos humos a tod@s y buena semana nos vemos en unos días 💨😶‍🌫️🍁

Plant is growing well. Transplanted them from a 1 gallon pot into a 3 gallon pot this week.

The strain grows pretty easy. She can definitely eat a lot nutes but be careful into flowering her ph tends to swing very slightly but if not caught early can be a bit detrimental later. Grew a 5 ft plant in a 3.5 gallon res and she flourished. Good and fun photo period plant.

Im soo excited for this run! This risentek soil is Amazing for starting seeds!!! 💯🌱🔥🔥✅🙌🏻💚💚😍

Nur noch Osmose Leitungswasser 500 Leitwert. Wochen Ende wird geschlachtet.❤️❤️❤️

Fastbuds Meme Video Contest

This is my first Grow Report at first i thought i messed up some seeds because 2 of them was for about 24 hours under SANlight so i have plant new seeds from Norden Seeds , Nordic Gorilla Glue, but only one died and maybe that was my bad too so at the moment i not sure which plant has which genetics but we will see more in the flowering stage , i hope this is my last time i flush seeds out of the soil 😅 Germination Method was 24H glass of water and then 24H Paper Towel Germination start 16.7.2024 first leaves 19.7.2024 ( 2 out of 6 ) water i used : osmosis water with calmag ( proled )