💩Alrighty Then Growmies We Are Back At it 💩 Well folks we just finished up the last run and so we are back to do it all over again 😁 So what do you say we have some fun 👈 We got some Gorilla Punch 👊 👊 👊 DAY 14 👉 Its been a really good week , lots of growth , just given water 💧 👌 Never the less we are moving along and so far so good folks👌 FC4800 from MarsHydro Lights being readjusted and chart updated .........👍👉Added an RU45 too the mix 👍 www.marshydro.ca 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

plant is finally showing signs of recovery from the PH issue, and as a result is showing some signs of deficiency and new growth is showing signs of recovery. Soil is showing good signs of microbe activity. However this plant is not acting like the other one at all. The thunderfuck seemed to not like the intense light either also seems to be a delicate when in a heavy feed situation. Oh well, the reason why we do experiments.

It’s the first day of week 7. The nugs are swelling up nice considering what they have been through. They are starting to smell strong. Both plants smell completely different. Even tho they are the same strain and from the same pack of seeds. If you have an idea of what’s going on with my fan leaves let me know.

4/15/25 This plant is blowing my freaking mind. Long stacked colas. Even the lower buds are plumping up like golf balls. This is an exceptional plant so far. Shes starting to show the classic "sherbert" purple that ive noticed shows up with anything that has sunset sherbert in the lineage. Some of the leaves are starting to fade slightly and the purple is coming in. The rs11 that this seed came from, produced the most from a single plant out of all plants ive grown and trained and kept that small. She yielded 3.5 ounces or a 1/4lb of top nugs from a plant that was only about 18 inches tall and vegged for 6 weeks before flip. Once i start to clear out all of the fan leaves later on in flower, its just going to be buds running the length of the stems 4/18/25 I really believe this may be a keeper. She is absolutely stunning. Just everything is perfect. She has super long stacking of buds up and down the stems. Im actually super stoked to see how she finishes up. One of the craziest parts is that shes in a plastic 2 or 3 gallon pot and this plant is going to yield insane.

😬😆UnCoNvEnTiOnAl GrOwTh 😆😬 ____________________________________________________________________________________ 🤪 24.3... 🤪 25.3 Almost completely regular, I let the smallest dry too much and it suffered a little, but by now I know the genetics, tomorrow it will be pretty sprightly. 🤪 26.3 🤪 27.3 🤪 28.3 we're halfway there, yeah 🤪 29.3 🤪 30.3 ____________________________________________________________________________________ 📜👀 A look at the details of what I'm growing 👀📜 🍊💚 Red Mandarine F1 🍊💚🌱🍭 Sweet Seeds 🍭🌱 📋 Details 📋 ⚧ Gender ▪️ Feminised ➰ Genes ▪️ 55% Indica / 45% Sativa 🎄 Genetics ▪️ Red Poison Auto (SWS39) хCalifornia Orange x Skunk hybrid) 🚜Harvest ▪️ 400 - 500 g / m² 🌷Flowering ▪️ 49 - 63 days ✨THC ▪️ 16% ✅CBD ▪️ 0,2% 🏡Room Type ▪️ Indoor 🌄Room Type ▪️ Outdoor 🕋Room Type ▪️ N/D 🎂Release Year ▪️ 2019 ___________________________________________________________________________________________ 👀📷🥇 Follow the best photos on Instagram 🥇📷👀 https://www.instagram.com/dreamit420/ 🔻🔻🔻Leave a comment with your opinions if you pass by here🔻🔻🔻 🤟🤗💚Thanks and Enjoy growth 💚🤗🤟

This girl has been one of my favorites. Pineapple express is true to it name looking like a pineapple once it fades the yellow, and the green are very beautiful together smells gassy with pineapple busting out of every tone

1.20.2024: Time to gives this a go. 2.3x2.3 tent, XS1500 light, 2 gal fabric pots. Pots filled with FFOF(90%) & Perlite(10%.) Don't ask me why I chose 90/10. Nutrents are the FF Trio. Freebee seed from Humboldt Seed Co(Emerald Fire OG Auto.) Decided to germinate directly into the medium. Light is at 50% power at 2.5ft from the top of the pot(s). I'll have the light running 24hrs until it sprouts(fingers crossed it does.) I sprayed the top soil with pH 6.5 water when i stuck the seeds in then placed clear plastic cups over the seed location. My 4inch fan is on the way and it comes with a monitor for temp and humidity....no idea what current stats are. Just hope the damn thing spouts. Fingers crossed. More to come. 1.24.2024: We've sprouted! 1.25.2024: Took the lil domes off, opened 2/3 vents for some circulation. Been misting the top soil just to keep it moist with 6.5ph water. I also "bottom fed" 12oz of water just to keep things lubricated. On the fence about when to give the plants a proper watering. Might keep things going "as is" for the next two days. Inline fan and associated hygrometer comes tomorrow(1.26) so i'll finally have an idea on what the current stats are in the tent. Will make adjustments at that point in time. Light is 2.5 ft from soil at 50%. 1.26.2024: Inline fan came yesterday. Only set up the probe just to understand temp and humidity. With the light at 50%, 2 ft from the soil, all vents closed except one(1) port at the top, my current temp hovers around 79 and the RH is 50%. After setting up a humidifier, i'm now running 75 degrees, 64% RH and VPD .58. All within tolerance. I can already tell it will be a delicate dance managing heat, exhaust fan speed and humidity. Still haven't given the plant more than 2 cups of water and i'm only watering when the soil is dry. Tomorrow(1.27) marks 1 week since the seed was dropped. Plan is to lightly water the entire pot when dry for the next week or until growth really kicks in.

Mindblown 😍😍😍

Week 6 of flower about another 2 to 3 weeks to go . Buds are forming Nicely but I’ve been a little heavy on the nutrients so I’m trying to remedy that .

Looking healthy and loving life so far ❤️

Sorry all its been busy on my end,getting my first outdoor grow in over 20 years going, and it's a whopper of a harvest if all goes well. Now back to the Dos si Dos, she's getting so frosty and really fattening up nicely. These two clones are the last of my monster cropper's I have. It's hard to imagine that these two lovely specimens were clones taken at week 5 of flower and reverted back to veg. I do know now that if I would've waited another couple weeks before flowering these two monster clones I would have ended up with substantially more bud sites. I have heard that monster cropping produces plants that are far more bushier and are perfect candidate's for the S.C.R.O.G technique of plant training. I do have to say that this genetic from Barney's Farm has earned a spot in my lineup indefinitely do to it stability and he's a growing, super fast flowering I'm just an exquisite taste.

Got super nice stuff. As rly got eight shooters (110 gr/1plant). Easy to grow, good reaction for scrog, defoliation with big harvest. Will grow this stuff again.

Pheno #7 and #4 showed the most desired traits and will be running both indoors iagain the coming weeks under better conditions. I didnt get as much photo's as promised but things have been hectic on all fronts, but I will do better next time ;) Its a pitty we had some issues and not all phenos where in a position to show the true potentail. There for we are running the 5 with re-running outdoors this season. Along with some new beans :D

LSD Zamnesia Tripping 🙂 | Fresh Frozen, Ice Water & Temple Balls — Week 16 From Seed First of all… Yes 😄 We are once again dividing the harvest reports into multiple chapters, and once again we apologize for that. But honestly, there was simply no way to fit: * harvest, * drying, * trimming, * curing, * smoke review, * macro photography, * fresh frozen work, * washing, * extraction, * and hash making… …into a single GrowDiaries update without rushing through important parts of the process. And this part? This part deserved its own spotlight completely. Because this week was not about flower anymore. This week was about resin. Living resin. Fresh frozen material. Ice water extraction. Patience. Cold temperatures. Sticky hands. And slowly transforming trichomes into beautiful hash. For everyone joining only now, quick recap: These LSD girls were grown under 12/12 from seed from the very beginning. Minimal training, mostly natural structure, gentle leaf manipulation, and environmental balance instead of aggressive intervention. Part of the harvest was dried traditionally and already covered in the previous report. But another part… …never got dried at all. Straight during harvest, selected flowers were removed fresh from the plants and immediately vacuum sealed before going directly into the freezer. No drying. No curing. No waiting. Fresh frozen. And that changes everything. The goal here is preservation. When flowers are frozen immediately after harvest, a large portion of the volatile compounds: * terpenes, * flavonoids, * aromatic compounds, * and delicate resin characteristics… …can remain much closer to their living state compared to traditionally dried material. This is why fresh frozen extraction became so respected in modern hash making. It captures a version of the plant that only exists for a very short moment in time. Alive. Wet. Fresh. Fully expressed. And honestly? Opening those frozen bags weeks later felt like reopening harvest day itself 😄 The flowers still looked incredibly resinous even after sitting frozen for weeks waiting for wash day. Now let’s talk process. For the wash itself, we used the Bubbleator machine courtesy of Zamnesia , and honestly huge thanks to them for providing it. They knew I wanted to start exploring ice water extraction properly, and they were kind enough to support the journey. The setup itself is actually beautifully simple. First: ice. Lots of ice 😄 The machine was filled partially with ice first before adding the fresh frozen material inside the working bag. The flowers themselves were placed inside a closed 220-micron washing bag. This is important because the bag keeps the plant material contained while still allowing the trichome heads to separate during agitation. After placing the material inside: * more ice on top, * cold water added, * everything submerged, * and then… …we waited. Around 30 minutes or so. And this step is actually extremely important. A lot of people think washing starts when the machine turns on. But honestly? The wash starts before that. This resting phase allows the frozen material to: * slowly rehydrate, * absorb water again, * become fully saturated, * and most importantly… * become extremely cold throughout the entire plant material. Why does this matter? Because trichomes become brittle at very cold temperatures. The colder everything gets: * the easier the resin heads separate, * the cleaner the release becomes, * and the less physical force is required. That is also why ice exists under and above the material: * lower temperatures evenly, * protect the resin, * and maintain the cold environment throughout the wash. Once the water temperature approached near freezing… …the machine came alive 😄 And honestly? Watching the water slowly transform during the wash is always magical. At first: just ice, water, and flowers. Then slowly: foam, cloudiness, resin separation, and finally that beautiful milky golden water hash makers love seeing appear. Meanwhile on the side, we prepared the filter bags. We did not use every single micron separation individually because honestly sometimes over-separating becomes unnecessary depending on goals and material quality. Instead, we focused on collecting the grades we actually wanted to work with and enjoy. And then came one of the most satisfying parts of the entire process: Collection 😄 Slowly lifting the bags. Watching the resin gather. Carefully scraping. Separating grades. Observing texture and color differences. Beautiful creamy resin everywhere. Some lighter. Some slightly darker. Some sandy. Some greasy. Every layer carrying slightly different characteristics. After collection, the resin was carefully freeze-dried. And this part also requires patience. First freeze drying. Then breaking it apart. Then more drying. Then more waiting 😄 Depending on environment and conditions, full drying can take several days because trapped moisture inside hash is dangerous long term. Rushing this step can ruin months of work later. In this case, the process stretched closer to about a week before everything felt properly stable and ready to work. And honestly… This is where the magic really started. Once dry enough, we allowed the hash to rest briefly before beginning the hand-working process. No extreme heat. No giant pressure. No fancy machinery. Just: room temperature, body warmth, gentle pressure, folding, rolling, stretching, and patience. The room itself stayed around 15°C, which turned out to be perfect for working the resin slowly without overheating it. And this step matters far more than many people realize. When hand-working hash properly: * oils redistribute, * compounds begin merging, * terpenes spread through the material, * oxidation starts slowly, * texture evolves, * and curing begins transforming the resin itself over time. You are not simply “rolling hash.” You are starting a living curing process. And slowly… The texture changed completely. From sandy loose resin… to creamy material… to sticky dough… to smooth beautiful temple balls. Honestly, seeing that transformation happen in your hands never gets old 😄 Final result? Three temple balls total: * two smaller ones from smaller micron collections, * and one large main temple ball that became the true star of the session. Final weight: 46.5 grams.( big one ) And honestly? I was extremely happy with that result. Especially considering the quality, texture, color, and how beautifully this LSD washed overall. Once formed, the temple balls were wrapped carefully in parchment paper before being vacuum sealed for long-term curing. And now? They rest. Months. Maybe longer. Waiting. Because the goal here is not “fresh hash.” The goal is evolution. Traditional temple ball style curing allows: * oils to redistribute, * compounds to merge, * texture to transform, * aroma to deepen, * and the entire resin profile to mature over time. Almost like aging wine. Or curing cheese. Or fermenting traditional products slowly and intentionally. This is medicine with patience built into the process. And honestly… That part alone deserves respect. We also included: * detailed process photos, * collection stages, * macro photography, * texture closeups, * curing progression, * and multiple stacked macro images showing the resin in insane detail. Some of these stacks reached: * 62 frames, * 87 frames, * 114 frames, * and even 152-frame focus stacks. Because honestly, hash under macro magnification becomes another universe completely. The textures stop looking real. Tiny resin mountains. Oil rivers. Micro-crystals. Glossy surfaces. Soft creamy structures. It almost starts looking geological instead of botanical 😄 Mr. Baggy of course supervised the entire operation like the professional resin inspector he clearly believes he is. And next week… The final chapter arrives. Smoke review. Curing review. Flower review. Hash review. Terpene evolution. Effects. Textures. Lessons learned. Mistakes made. And final thoughts after this entire LSD journey from seed to cured medicine. And finally… Thank you. To Zamnesia for the genetics and the Bubbleator. To Plagron. To F.O.G. To all the LEDs, gear, and equipment involved. To GrowDiaries. To the community. To the OG followers. To the new curious visitors. To the silent supporters. To the skeptics. To the lovers and even the haters 😄 To everyone spending time sharing this strange beautiful plant journey with us. Wishing everyone: cold water, sticky fingers, healthy plants, beautiful resin, and enough patience to let good hash become great hash 🌱

Decidi optar por 15 dias de flush, comecei no dia 60 de floração regando com aproximadamente 10 litros de água com pH 6.7-6.8 @ cada 3 ou 4 dias (regando somente até sair embaixo e encher o prato). Essa semana foi uma das mais lindas de acompanhar, eu achei incrível o quanto ela engordou desde o primeiro dia de flush e eu ainda vou deixar crescer mais uma semana. Terminamos portanto essa semana no dia 67 de flora e eu vou deixar até dia 75. Meu objetivo são 200 gramas trimadas secas. Mas 150g já passa de 1g/w e isso já será uma vitória pra mim.

✂️ Harvest Day is Here! + BIG NEWS & Giveaway! 🚀🐺 ​GrowFam, we finally made it to the finish line! 🌱? ​After weeks of TLC, it's time to chop this broccoli head. I am incredibly proud of how this run turned out. The buds are looking frosty, dense, incredibly terpy, and I couldn't have asked for a smoother ride this time around. ​But as we all know, the hardest part of any grow is what comes next: the dry and cure. ​Usually, my setup involves hanging a drying rack near the tent, or drying right inside the tent if it happens to be empty. But for this harvest, things are going to be a little different… and a lot cooler. 😎 ​I am super hyped to announce that I have officially been selected as a #DryRocketTester! My test unit literally just arrived, perfectly timed for this harvest. I’m going to be drying this entire run in the DryRocket and taking you all along for the ride. Expect a full review and step-by-step updates on how it handles the terps! ​Now, for the BEST part: 🎁 GIVEAWAY TIME! ​Recently, I won 3rd place in the DryRocket Photo Contest, and they hooked me up with a 50€ voucher for their shop. Since I already have my hands on the tester unit, I am giving this 50€ voucher directly to YOU guys! ​👉 Head over to my Instagram @wolfvb.growdiaries to enter the giveaway and snag that 50€ voucher! ​🔥 BONUS: If you don't want to wait for the giveaway and want to upgrade your drying game right now, the awesome team at DryRocket hooked our community up. You can use my personal code wolfvb30 at checkout to get 30€ OFF your own DryRocket! (Code is valid until May 31st!) ​Thank you all for following along on this diary. I'll be updating the dry weights and final smoke report soon. Let me know what you think of the harvest in the comments, and don't forget to check out the giveaway on IG! ​Keep growing, Pack! 🐺🌿💨

Day 28: Happy days folks. hope we are all well and sane still. This week has been a good week for node stacking and starting her frost making it seems. She is a great size to work with now and has responded well to the stripping out of the lower larf and leaf. The airflow is perfect below decks now and allows air to move through the whole canopy and also light to make it through. Her buds are showing her Gelato 41 genetics with their appearance and are identical to the white flame like pistils. She is giving a slight terpene of sweetness and a little diesel too. Her stripping out had my fingers feeling a nice tacky , oily feel to them so she is certainly starting to nurture the budlets. Their golfball appearance is swelling daily and seeing how lose they are to joining up already , holds hope for some long chunky colas. She is approx 3ft now and a good circumference to her too. It is a safe assumption to think she will go the full 11 weeks flowering based on her parentage. The cross of these two strains is so far producing a perfect sized plant for my room and has given me the confidence to dabble in this area in the future I think. Gorilla Zkittelz/Blue Gelato41 is a good X and I know from another seed popped by a friend that Gelato41/Hulkberry creates a 5ft cola'ed monster plant. ( pic in my photos) and I still have crosses of Gelato41 and Cookie Kush , Gelato41 and Phantom O.g , Gelato41 and Orange Sherbet to run !!. I am fortunate to have a lot of these new beans now but I also have some amazing sponsored genetics running and some exciting testers still to do ( 9 more fast flowering strains to put through the wringer and try to identify !.lol) . Well that's another week down and only 7 to go for her. !!!!!!! she has a lot of big stacking buds growing time left. WATCH THIS SPACE !!!!!. Be safe people.