The nice weather has finally returned, and it should stick around for the next few weeks. It's just in time for the last couple weeks of the ladies. ☀️☀️☀️

Start of week 14 (Day 49) 9/20/25 Fed with water 9/20/25

Hey guys :-) . Today the plant was sprayed again with neem oil. There weren't any more trips to be seen after the second application, but to be on the safe side, you did it again today get a cure. That's why the beautiful dark shimmer on the leaves :-). The ladies are developing well and have 1 week before I change the time to flowering. Normally I would let it get bigger and train because the tent only has 80x80 and 180 watts are available, so I will switch it over soon enough. This week it was poured twice with 0.8 l each time (for nutrients, see table above). Otherwise everything was cleaned and, as always, everything was checked. Have fun with the update and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://greenhouseseeds.nl/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany

Google doc for nute schedule: https://docs.google.com/spreadsheets/d/1HtHnZOxMHtBK5DFQjpBun2lbhDxYVhI7lJaq4W6xbyk/edit?usp=sharing (Choose Sweet Seeds at the Bottom) Week 2 of Veg - Week 2 Total EC Target: 1100-1400 pH: 6.0 - 6.46 Sensi Grow A - 8ml Sensi Grow B - 8ml B-52 - 8ml Voodoo Juice - 8ml Rapid Start - 1ml Great White Myco - 1tsp This grow is just beginning and still going very well. Sweet Seeds genetics are crazy. Like... fuckin' amazing. I had a 3.5inch root starting on my Red Poison. This grow is going to be great! Advanced has a tendency to give VERY high EC levels if you follow their guideline. I use what they recommend and then I tone it down to the EC levels I want. Just a heads up if you are using Advanced and not checking - you are WASTING nutes.

Original Sensible Seeds - Frosted Guava 🍈 Enjoy - Week 10 👨🏻‍🌾☀️ - 25-28 grad Celsius - 55-60% humidity level - 20l Air-Pot (75% BioBizz All-Mix, 25 % BioBizz Worm Humus) - RO-water (PH 6,25) Day 68 🌳 - heavy defoliation - soon flower 💐 Sanlight Evo 3-60 40%: about 500 PPFD Spider Farmer Glow30 6h/18h on

After i ended mast week with hurting her, I decided to give her some extra support on the 2main colas. I did this by putting 2 more wooden sticks next to the colas. It wasn't a pleasant thing to do because i could feel the stick penetrating te roots. hopefully i did'nt hurt them to bad. after that I tied them up to the stick instead of keep pulling them down like like i intended to do. I noticed that the weather is changing and the forecast predicted stormy nights. putting her inside is no option, so i'll guess giving her extra support with sticks was the best thing to do. i will also place her under a shed at night, if it doesnt get blown away by the storm

Ok 😎

Just for the pro mix competition, various plants i've harvested with Pro mix soil. Thank you Pro mix for the soil, my plants and I both loved it.

this week I made the decision to transplant both plants .. the 20 liter pot was already too small .. and it was bad for development and growth .. two-headed SATORI :-) transplanted into a 50-liter basket for dirty clothes))) I had to buy it because everything is closed !! I could not find a 50 liter pot for plants due to restrictions on Covid-19 .. for this reason this basket became an alternative .. which seemed to me not a bad replacement for AirPot .. it is 35-40% transparent through .. and the air will flow better to roots .. after transplantation, she began to grow oochen rapidly)) I transplanted the fat SATORI into a smartpot 15 gallons .. a little depressed after the transplant, but I think everything will be fine)) the gender has not yet been shown, but as you can see in some of the photos, the hope is that both of them are girls all growing and growing .. and not a little important factor .. already 4 days as a regime 12-12 .. I want to make sure that they are girls and wait until they show the sex by 100% then with a new transfer to the growing season ..

i run in a bit calmag defiency i dont know why, my only guess is overwatering, other plant (tangiematic) didnt have this problem with same feeding. maybe the light was too close and burned a bit faster trough the calmag as it has 2.75 par.

Nice colorful yummi Buds... cant wait to dry them.. they almost ready💪 waiting for the one next to catch up.

Grown out this week and got them ready for the early flower growth. Trimmed heavy and wired all branches away from each other. LST in full effect. Hoping it’s not too much trauma for them.. they proved me wrong. Bounced back with vigor and bright excitement! Eager to see these buds start forming 👀

Strech has been manageable and plant is healthy, not one leaf yellowed or showed any signs of deficiency/excess. Will defoliate at day 14 if the second week strech is alot, if not, then at day 21. Watering twice a day with 1 gallon per watering and I add fish shit and tribus bloom together every other watering day (so 3x per week) and recharge will only be used on Saturdays going forward.

they grow very fast this weeks no problem at all whit the Remo nutrients theys drink 12 liters a week crazy the last watering of the week 3 liters each i give them 9ml mix whit 4 liter of waterthe week 4 is going to be 10 ml mix whit 4 liters of water hi give for 7 plants 72 liters this weeks

End of Week 13, marks the end of Week 9(63days) of Flowering. Trichomes are less clear, more cloudy-milky, and frosty, but all I'm waiting on is anywhere between 10-30% of the trichomes to change its color to amber to decide when to harvest. After the gradual down shift in nutrient feeding and flushing transition, the buds still grew almost 1/2'' or so since last week, with slow signs of deficiencies(nitrogen only), but instead could be the natural plant cannibalizing process in action. I will continue to flush with water only until harvest, to effectively drain away the extra nutrients and salts, which should be enough to keep it's natural flavor and smell before harvest.

It was easy to harvest she was very small jut cut it quickly without stalks the wet weight is 17 g of the buds, nicely coated with THC and it was approx 70% milky and 40% amber trichomes. Hopefully good time to be harvested. This site has changed can not update and edit the comment section. The smoke is nice it is kind of relax and strong high. Not the best but not bad at all. I like it.

All the photos are in the 8x8 now. just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Three of the four original seeds have sprouted and are growing well. I planted the fifth and last seed as an replacement.