The Grow Awards 2026 🏆
Likes
Comments
Share
@Hashy
Follow
Well what can I say. I messed up big time with this one. The grow was scheduled to finish around day 100 and 3 out the 4 plants where done by then. Due to over stressing this one and over watering I completely messed it up. Trying to keep her going past the day 100 mark was a mistake because I have only got a small quantity for hash. Lesson learned on this one.
Likes
4
Share
60x60 cm tent in a 1920's peek-in-closet Oversized vent for silence High power DIY LED True SoG 12/12 from seed with 15 plants in 2L pots Watering all plants in bottom tray with 30% of total pot size (10L) WEEK 1 DAY 1 - Germinated in paper towel DAY 3 - Planted into pots + Lights ON at 125w DAY 5 - All plants have broken soil DAY 7 - Slight stretch - Light at 185w WEEK 2 Two of the Iced Out are lagging behind, others are on point - I'm trying to push light and nutes to the max. Extraction fan (AC infinity Cloudline T6) on level 2. DAY 13 - First full watering (10L) with 20 ml Canna Terra Vega DAY 14 - Circulation fan turned on (low) during lights on WEEK 3 Good growth, two Iced Out still lagging DAY 18 - Light at 225w, Extraction fan on level 3 during lights on DAY 20 - 2nd watering, 8L with 30ml Vega + Light at 250w DAY 21 - On point, mostly :) Could've pushed nutes a bit more from the go WEEK 4 DAY 24 - So far this week I'm just kicking back and watching them do their thing. The two lagging Iced Outs are trying to catch up. DAY 26 - Watering 10L with 50 ml Vega (one day too late...) + light on 300w (max) DAY 28 - 4 weeks from popping the seeds, looking good except for the two Iced Outs, one of them is trying to get with the program, the other... Well, some plants are just pricks. WEEK 5 I think this is the week we'll see them take off :) DAY 29 - Plants are starting to show sex, removed 2 Urkle Mints males, the other two are females, the rest are fems so we're down to 13 female plants total with only a single weakling DAY 29 - Watering 8L with 50ml Vega (shouldn't have been later than today!) DAY 33 - plants exploded over the last 4 days and most are stretching and starting to flower DAY 33 - Watering 10L with 60ml Vega (feeding Vega once or twice more then we switch to Flora) DAY 35 - Just cruisin' 😎 WEEK 6 Lots of stretch the past week, flowers are setting in, the laggy Iced Out was culled, 3 plants are a bit behind the others.. DAY 36 - Watering 10L with 50ml Vega DAY 39 - Watering 10L with 50ml Vega DAY 42 - Defoliation
Likes
28
Share
Start of week 4 of flower! Off to a troubling start, as the light switched on over 1 hour ealiere than scheduled. I took a spare timer, and set it up to continue it's 12/12 schedule, but now moved one hour back. I cross my fingers they forgive me for this error.🙏 👽👉31/10 The day after watering and the day my timer messed up my 12/12 schedule. But hope it brings no problems. I defoliated lightly and only removed most under the SCROG line. Even a couple of underdevoloped branches that stretched below SCROG-net got cut. 👽👉 1/11 Been having a battle with humidity after watering, but upped my air circulation to help. 👽👉 2/11 Waterday* Upped my nutes on BioHeaven, BioGrow and BioBloom. 👽👉 3/11 They seem to be responding good to the upped nutrients. 👽👉 4/11 Humidity under control. 👽👉 5/11 The VPD on point, has really speed up the trichome production. 👽👉 6/11 Waterday* Stayed on the same schedule, as last watering. They seem very satisfied and no signs of mistreatment.
Processing
Likes
6
Share
@420keef
Follow
Finally got somd fertillizer from bio-bizz, and i tied the top stems more to the the bottom to increase lower growth thanks to @Doggy for the help
Likes
121
Share
@ctm_dzagi
Follow
It should be noted that with the current share of blue in the spectrum, the sprout does not stretch at all, I will probably adjust in favor of red in the coming days
Likes
46
Share
Likes
8
Share
So this is how things are looking for the ladies at the end of Week 3 of Flower, I have uploaded a video for you guys with all the information, any questions just ask away 👍🏾👊🏾😎
Likes
10
Share
👉DIA : 13/12/21👈 Metodo de germinacion: 👉<< VASO DE AGUA >>👈 seleccionamos las cantidades deseadas de semillas y en un pequeño vaso con agua opmotizada insertamos las semillas para nutrirlas durante 12H, situada en un lugar sin luz, apropiadamente tapada con un trapo.😉 __________________________________________________________________________________________________________________________________________________________________________________ 👉DIA : 14/12/2021👈 👇👇👇👇👇👇👇👇👇👇👇👇 una vez pasada las 12 H de germinacion en vaso de agua , depositamos las semillas bien colocadas en un recipiente con papel de cocina humedecido con agua y 1ML de estimulador de raices (TOPCROP). Esperamos de 1 a 2 días a que salga la raiz de la semilla y ser transportada a los Jiffy😉 ___________________________________________________________________________________________________________________________________________________________________________________ 👉DIA 17/12/2021👈 👇👇👇👇👇👇👇👇👇👇👇👇 Pues pasados los 3 dias de germinacion en el metodo de papel, vemos que ya salieron a luz las raices y con sorpresa😱 NUNCA habia visto una cosa asin!! An salido GEMELAS, sii sii !!😵 de una misma semilla an salido dos raices una cosa impresinante! y damos paso a colocarlas en los Jiffy. 👉Instrucciones:👈 - Colocación de los jiffy en un recipiente con 2L de agua y 2ML de enraizantes de top Crop. - Dejamos actuar durantes varios minutos hasta que el jiffy se extienda. - Abrimos un pequeño orificio en los Jiffy para introducir la semilla con el cáliz dejandolo hacia afuera. - Colocamos en un pequeño invernadero para que tengan la suficiente humedad. - Ayudandonos de unos foco de pocos waltios, le damos a luz necesaria para esta face de germinacion dejandolas 24 horas de luz. ________________________________________________________________________________________________________________________________________________________________ DIA 22/12/2021 Colocacion de Jiffy en Maceta de 3,25L 👇👇👇👇👇👇👇👇👇👇👇👇 👉Instrucciones👈 -Pasados varios dias vemos que el periantio(semilla) ya se rompió y empezo a salir los cotiledones con una hermosa raiz blanca por debajo del jiffy. -rellenamos macetas de 3,25L con sustrato de top crop(anterior cultivo). -introducimos los jiffy en las macetas dejando la plantula bien colocada. -regamos con 3L agua opmotizada y 1ML/L enraizante Voodoo ADVANCED NUTRIENTS - Permanecemos con las 24 horas de luz con foco led. _________________________________________________________________________________________________________________________________________________ 👉DIA 25/12/2021👈 👇👇👇👇👇👇👇👇👇👇👇👇👇👇👇 pasados 3 dias desde que se plantó en maceta. A dado unas respuestas increibles !!👍 las volvemos a regar y a cambiar las horas de luz que se pasarian a 18H
Likes
13
Share
@Canadian
Follow
The plant is monster even though I topper at the 6th node she is 51in tall and smell nice fantastic but requires support the plant grows very tall even before having lots of weight in the buds it requires support . today I brought them outside the tent to give them a good water down in order to drain out any excessive buildup in the soil. I will continue to update but thank you for reading have a happy grow.
Likes
9
Share
ปรับไฟทำดอก 12/12 เข้าสู่ช่วง week2 Temp 26 Rh 65% Ec 3.0 Ph 6.3 VPD 1.13 Co2 1500ppm
Likes
22
Share
2 Pheno still in veg living da solo cup life
Likes
10
Share
@nonick123
Follow
🚀 4 clones de Blueberry Pie F1 Fast seleccionados por @stacksfarmz - https://www.instagram.com/stacksfarmz/ 🚀 Breeding by @seedsmangenetics - https://www.seedsman.com/eu-en/blueberry-pie-f1-fast-feminised-seeds-sman-blpi-fast-fem 💦 BioTabs 15% DISCOUNT code "GDBT420" biotabs.nl/en/shop/ @biotabs_official 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE @promixmitch @promixgrowers_unfiltered 💡2 x Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp
Likes
5
Share
Likes
20
Share
@Unkraut
Follow
Plants getting real sticky and buds are getting fatter Just 3 weeks to go... Will defoil them hard next week to lower RH in the final weeks
Likes
30
Share
~ FASTBUDS TESTER #2203 ~ Well friends, here we go on another 'canna-venture' together! The grow room has had a complete remodel and some upgrades done to it including brand spanking new 4x8 and 4x4 tents and a Trolmaster Hydro X controller along with a new Control Panel. This tester strain is one of six tester strains that FastBuds has graciously provided me with and I'm looking forward to seeing what this girl has to offer when she's grown to her full potential! One drawback of 'testers' is I have little to no information on it other than its number and that it's an autoflower... 🤪 But, it's ALWAYS a blast growing them for me because not knowing a lot allows me to just concentrate on the essentials: Light, Environment, Water, Nutrients and possibly a bit of LST... not complicated, just basics like keeping a constant temperature and RH in the tent at a level that gives a good VPD, watering when almost dry and maintaining proper light levels according to their stage of growth. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~THE SETUP~ ~Initially seeds were lightly scuffed, then soaked for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Mars Hydro Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged. ~Planted into Jiffy Peat Pellets that were hydrated with distilled water warmed to 78℉ with a 7.0 ph. ~Once roots emerge from the Jiffy Pellet they're transferred to their fabric pots. ~Grown 100% organic in a 4g Gronest fabric pot and a 3g fabric pot by Wraxly filled with Mother Earth 70/30 Coco/Perlite medium and initially amended with Dr. Earth 4-4-4 / Earthworm Castings / Dr. Earth Flower Girl 3-9-4 and Coast of Maine Stonington Blend Organic Plant Food 5-2-4. ~19/5 light cycle for the entire run with supplemental UVA added during flower. Lights are controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. ~Top dressing every 3-4 weeks with slow release dry amendments and Earthworm castings. ~Straight water ph'd @ 6.2-6.8 when needed and bi-weekly Compost Tea's. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 12/1- I soaked both seeds for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Vivosun Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged roughly 24 hours later. 12/3- Today their tap roots were about 1/4 to 3/8" so at 11 am I transferred them into Jiffy Peat Pellets that were hydrated with distilled water warmed to 78℉ with a 7.0 ph using a tine off of a plastic fork as a 'mini trowel' to make a hole in the pellet and to gently cover the tap root, leaving only the seed head slightly exposed. This method accomplishes most of the initial work the seed has to do by eliminating having to orientate itself, push it's root down and head up. By 10pm the #1 seed had her cotyledon leaves opened ...waiting on the #2. 🧐 12/5- Well this is Day ONE for the #1 FBT #2203 and I anticipate seeing her sister poking her head out real soon! I'll keep them in the covered/heated Jiffy tray until I see their roots beginning to emerge from the peat pellet, then I'll transfer them gently into their respective fabric pots. The #1 will be going into the 4g Gronest pot from FastBuds and the #2 will reside in a 3g pot by Wraxly, which I'm trying out for the first time. 12/7- Yesterday I checked the #1 tester and she had roots starting to emerge from her pellet so tomorrow I'll transfer her into her 4g Gronest pot. The #2 tester has finally made an appearance and this will be Day One for her! She looks great and I'm confident that she should be ready to transfer into her fabric pot in the next couple of days! 😎💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow Strong! 💪😎🤙
Likes
8
Share
NFSOT It's Day 08 For my 02 Kombucha Cream by atlasseed and it's Day 07 For my Snow White and SpliffStrawberry By Spliff Seeds Amsterdam . Last Night when I got Home from work I Blasted (Foliar Spray) all 04 Plants With Some F2 FOLIAR by Quad.Ag. I mix 1L Of Smart Water ph at 6.4 ppm at 146. This Morning was Feeding Day Kombucha Cream 02 and My Snow White received .5ml of Emerald Harvest Nutrients 2-Part Nutrients and 1ml of Quad.AG Products Fulonic Ph at 6.4 and I did a mistake on the video ppm is at 236 not 218. Now Kombucha Cream 01 and My SpliffStrawberry Received .5 of Emerald Harvest Nutrients 3-Part Nutrients and 1ml of Quad Ag Fulonic ph at 6.4 ppm at 346.All 4 Plant received about 100ml . On my next Feeding I will introduce them to the RootWizard and Hygrozym by Hygrozyme 4 Growers . Happy Growing Growmies 🤘🏻
Likes
15
Share
@Uwish
Follow
With the last heat wave, I had an answer to one of my questions, clearly my chiller is not doing the trick. I have water temperatures that went up to 27°, which is way too much, the plants deprived of oxygen, started to declare several deficiencies due to an assimilation slowed by the lack of oxygen. It is then that a nasty fungus came to say bijour, it is me MR pythium! It was necessary to act, at the risk of having to restart the culture. So I applied hydrogen peroxide and ROOT ROT X, and both products are doing harm to this nasty pythium, things are now back to normal. On the other hand, the plants had a decreased growth for 10 to 15 days, so I'm going to extend my growth for 10 to 20 days, that is to say 1 or 2 soups, I'll choose according to the root development of the plants. Before going to flowering, I have to catch up this delay in order to make a nice crop.
Likes
44
Share
Thanks for checking out my grow! This is the 4th or 5th strain I’ve ran by 34 Street Seed Co. I have yet to be disappointed, great genetics for a fair price. This Pink Lemonade strain has tested in the 30% cannabinoid range with crazy terps, all from other Home Growers! This will be one of my submissions for the 2023- 34 Street Grow Cup, Can’t wait 🇨🇦👊❤️ I started as usual by soaking my seeds for about 6 hours in a glass of distilled water, then planted directly into the substrate about a 1/2 inch into the starter pot. I dialed my light back to about 100 watts from the wall, and raised it to about 40 inches above the pots. I covered the pots with domes, and set my humidifier to run non-stop. 30 hours later , they had all sprouted ❤️
Likes
28
Share
I was on vacation for 9 days, unfortunately I discovered some budrot on the S.A.D. despite the dehumidifier and air conditioning. It is probably also due to the fact that the flowers are extremely compact and hard. It is of course on the side facing away from the fan. It shows once again how important good air circulation is. Apart from that, it has not been fertilized for a week and has only been watered with tap water. The plants have not had any water for 5 days and are on the verge of drying out. The harvest will take place in the next few days. I will report further.