I will b running the SHERBCAKE again to dial her in properly took a lot clones of her so I can’t wait to run her again terps of her is dessert and fuely 🍰⛽️ seeds made by k1 kreationz

Hi all :-) It becomes bushy and bushy 😅. I had thought about trying to top everyone again. But have in mind that everything fits into the flower tent 🙈. I wish you all a nice week 👍 stay healthy 🙏🏻 and let it grow You Can Buy The Strain at : https://www.barneysfarm.de/blue-gelato-41-456 Strain : Blue gelato 41 clone from mother (Barney's Farm) ☝️ Genetics: Blueberry x Thin Mint Girl Scout Cookies x Sunset Sherbert 👍 Vega lamp: 2 x Todogrow LED HLG Quantum Board 100 W ( 200 W ) 💡 Flower lamp: 2x Todogrow LED CXB3590 205 W = ( 410 W ) 💡 ☝️ Soil : Canna Terra Professional + ☝️ Fertilizer: Canna Terra Vega , Canna Terra Flores , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with Ph - to 6.0 - 6.3 💦 💧

Week seven all the girls are really happy. They’re all getting the width and height. I want no issues. The insects have seemed to die back a little bit. I haven’t had as much problems with them so that is good. All the girls continue to grow a very rapid rate very happy with the progress so far Week seven all girls are happy.

Hola Riego en el día 16: 250ml c/u 0.5 Micorizas @colectivo 1ml Calmag 1ml Bio Grow 1ml Bio Heaven Riego día 21 250ml c/u 1ml calmag

Days 35-42 (Day 36) Some minor problems starting to arise here. A few times this week it got up to 90+ degrees which I think may have caused a bit of heat stress in some of the plants. I’m seeing a bit of cupping/crinkles on some of the fan leaves and some of the new growth is looking pretty gnarled and twisted. I hear windburn can cause this too so I’m turning my fans down to low speed. This could also be a problem with humidity so I’m going to turn off my humidifier, dim the lights and raise them. During my last feeding I mulched in some worm castings but it seems like they’re keeping the soil/coco from drying out. Pots are still decently heavy and even the surface is still quite moist but they aren’t showing any major signs of overwatering. I figure it will only be a few weeks before the castings break down so I will just leave it. A few of the plants are starting to show yellowing leaf tips which is probably some kind of micro nutrient lockout from my PH being slightly too high. It could also be from nute burn so I will water in 6.0 until I see some runoff. Although the most likely culprit is potassium excess. I’ve been feeding potassium almost as much as nitrogen so far. I know that can cause the yellowing of leaf tips by locking out trace minerals. It can also cause leaf problems like crinkling. Excess K can even cause water retention! Will water at 6.0 until run off next watering. The lst is coming along nicely. It was a good idea to remove the first two sets of branches (not leaves). Now I have 4-6 perfectly even stems coming from each plant that I plan to top one more time each. (Day 37) Today I’m going to vacuum, clean, wipe down and spray all my equipment in the tent. I’ve been letting the floor get quite dirty and I haven’t had the chance for a thorough clean since last round. I’m kind of surprised I haven’t seen any powdery mildew yet. I guess the prevention spray is working because the room has to be infected from my last crop. (Day 40) I was reading that you can foliar spray whatever you are deficient in for an immediate uptake. I‘m going to try that with my current potassium excess since it locks out trace minerals. I’m going to foliar feed a bit of phytoplankton at 15ml/L and some MagnifiCal + VeloKelp from Remo nutrients both at 5ml/L. The cal mag is not organic but as long as it’s not going into the soil and doesn’t contain chlorine I’m fine with it. I’m also going to be changing the light cycle to 18/6 for the remainder of veg. This will be their first dark cycle so they can properly foliar feed. Edit: humidity shot up to 85% a few hours after foliar spray. I went to top dress everything today and I mixed up the plants while doing so! So the ones I was unsure about I gave 1 extra tablespoon. I won’t top dress again for at least 10 days. Might give a light tea sometime next week. I also tilled the shit out of the top of each pot. It had a hard crusty layer on top that was keeping the medium from drying out properly. I’m not going to water again until everything is bone dry. Then I will water until slight runoff at 6.0 ph with some Dr. Marijane bacteria/root probiotic. I’m starting too see a lot more of these abrasions on some of the bigger fan leaves. It almost looks like thrip damage but I’m 100% sure it’s not a pest above ground. It could be bulb mites, which I found in my worm castings but I can’t check until the roots are more established in their pots. The leaves themselves are cold and feel damp to the touch. I haven’t even seen a fungus gnat since I last fed. I’m hoping it’s related to the K excess and clears up with the troubleshooting. (Day 41) Just ordered a wire cube rack to prop my plants up with and help evaporation/root warmth. Each cube is 11.8”x11.8”x11.8” and it comes with 16 cubes. So it will fit just perfectly in my 4x4. Depending on the size, I might order another one for the flower room where I would need 25 cubes.

🤗 Hi fellow growers. We are back here to harvest the Northern Lights Auto from Seedsman. She took 11 weeks to finish flower and a total of 15 weeks from seed to harvest. 🌱Growing her was a little tricky as she was finicky at the beginning of flower. She wasn't the fastest auto but she put on some tall colas with some fair amount of resin smelling of sour stone fruit such as a plum. Chopped her down then dryed for 14 days in a environment controlled room. Then began the trimming process. After a nice manicure the plum smelling buds were then placed in a jar to set cure for 30 days. There was quite a bit of larf nugs on the bottom skirts that I should have trimmed off during the flowering cycle but sometimes I like keeping them to press into some rosin before my nugs are cured. I find that pressing the flowers with in the first week of the curing process produces the best quality flower rosin In the end I'm left with a gram and a half of some beautiful Northern Lights flower rosin that tastes and smells like a sour plum and packs a big punch. About a 10% return so not the greatest yield but it sure is some high quality rosin. Keep it mind it was the larf flower and I press at 180°F to preserve as much flavor as I can. I'm after quality and have been achieving that. Effects - Relaxing, calming, Happy Yield - 68 g nice nuggets 14 g of larf that went to rosin Smell - Sour plum Forrest Taste - Skunky plums

Die volle ist bruc benner die andere Papaya frostig langsam werden die immer besser

Super beast of a plant I wish I had taken a clone I would love to have this plant around forever it grew so much so fast and is finishing up really fast

I've been waiting for at least some trichomes to turn amber. I prefer to harvest when there are at least a few amber. I took the PL2 3 days before the PL1. Flushed them for a week only

Increased nutrients to 11ml/gal each. Trichomes still mostly clear. Several weeks of flower left yet.

This week has been extremely hot! Inside the tent reaching up to 30C ! So I’m going to need to get that in check this week, she seems to be handling it like an absolute trooper though!

She's doing OK, certainly not jumping up in height though.

Easy and didn't need much love. It ate organic and seemed to love it. Daughter says it smells like keif. It's in the drying room now. I can see myself growing a room full of these in the future. Cant wait to see it on the scales and taste it in my bowl... I found this one to be amazing and I think I nailed it!

Dear Growers , Over the next weeks, we’re excited to share a very special project with you: Sensi Seeds Berliner Automatic 2025 Release With dedication, knowledge, and hands-on practice, we’ll guide you step by step through the journey—watch with us as growth, development, and small wonders unfold before your eyes. Whether you're a beginner or an expert, you are warmly invited to join, ask questions, and share your own experiences along the way! Project Setup & Conditions: • Brand/Manufacturer: Sensi Seeds • Tent: 120cmx60cmx80cm • Light: 2x 200 Watt Full Spectrum • Humidity: 50% • Soil: Narcos Organix Mix • Nutrients: Narcos Products • pH Value: 6 A Special Thanks To Sensi Seeds for the amazing collaboration, trust, and generous support in making this project possible. Your contribution is truly appreciated! Congratulations on Your Own Projects! We celebrate your growth, your creativity, and the passion you bring to the table. It’s truly inspiring to witness at Each visit . Stay curious and keep up Growing —we look forward to welcoming you back for the next chapter soon!

Well, the autopot is working. Who knew life could be this simple hahaha. This week the plant has just exploded, they usually do around day 21 but jeeez, in the space of 3 days shes grown a fair pair of shoulders 🤣 Going to change the res and up the nutrients slightly tonight so hopefully she goes from strength to strength. Let's go 👌🏻👌🏻 Fast buds are easily the most fun Autos to grow.

👹06/07/2025 Week 16 LFG!¡!👹 She's starting to come into preflower really nicely I'm surprised it took so long to stretch weeks ago I'm honestly surprised and hopeful for what's in store for the next month or so lol stay up guys I'll update as the days and weeks go on thanks again for stopping by lfg!!!

Hopefully :-) Barney's Sweet Tooth Auto Week 1 HomeBox 120x90 12.5l Potsize, soil Biobizz light mix LED 2xGC4 250w, 1x GC-BAR Single 70w, 4x Secret Jardin per 26w (Flowering) Biobizz nutrients

They all are getting close to harvest except Gorilla Glue which decided to out grow tent. Had to open vent and add light for top cola. Ugh