Friday, march5th. I cleaned the Bottom area, small Shoots and leaves were cut Then i Did Some LST to spread her. And shw shows sooooo many potential Budsites, along the Branches... omg Flowers are to see, and she seems to be very thirsty... i have to give her more to drink no suffering in Flower and I think Iam starting soon with the Flower Feeding ( Organic Bloom Liquid)... but until now shes still stretching i wait alittle longer

Over all was an amazing grow, super sticky dense nugs with smell of berries, highly recommended for everyone!!

Week 11 now and this beautiful Gelato Auto is starting to get thick.

It smells of nothing but diesel n a very pungent Kush smell the berries nor mango scent hasn’t quite poked thru yet but it definitely smells of quality bud in the veg closet ha may need to upgrade my carbon filter. Gonna move these ladies at the end of the week. Thanks for tuning in!

This week has gone again just a small amount of defoliation and watch those buds get fatter and fatter

UPDATE : The plant has now been transplanted into a 5 gallon fabric pot which had been pre watered before hand, I also added some great white mycorrhizae that @MrG was kind enough to send out for me shes been happy with the new transplant growing much more everyday she is almost ready for her 1st top in a couple days but here how she looks as of today there is no point in using any mycorrhizae when using sythentic salt nutes as every time you feed it will just flush the stuff away but i played it smart and transplanted a day after water therefore it had a couple days to sit in the mycorrhizae and possibly work, who knows wether it benefited the plant but was worth a shot and still had rapid growth after doing so, it was 3 days after transplant when i watered so it possibly could of got to work in the mean time before i flushed it away also the morning after transplant i increased the light intensity only by +100ppfd 30% power Temps - Day 24-27 - Night 21-19 RH - 60-75 VPD - Day 0.6kpa - 0.8kpa - Night - 0.5kpa-0.7kpa (roughly) I have started to also feed nutrients at small dosages its been 8 days since there 1st feeding and they seem fine from my knowledge but i did water until run off and tested the EC/PPM of it and it was way too high so i think next water im going to have to flush heres what happend water hardness before feeding was 124ppms water run off hardness risen to 1140ppms 1140ppms is way to much the veg stage and i need to lower it down which i will do so in 3 days in the mean time ill keep a close eye on the girl Happy Growing :)

Week 22/1 - 28/1

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

The growth and appetite of these two plants has increased proportional to the airflow increase. The BHB is drinking 4 liters a day, the CBD, 2 liters. Every second day is a feeding. EC drops by approximately 2-3 points every 48 hours. PH rises from 5.5 to 5.8-5.9 every 24-48 hours. CBD's issue was Magnesium. Added Epsom salts to the res and issue is no more. Both plants are stacking very well and the CBD has now caughtup to the BHB's height. CBD is at 66 cm while the BHB holds steady at 70.

Girls got a little stressed out as you can see in the images, but they will flourish after a defoliation and a good feed...

Beginning of week.. Such weird bud structure.. Love the smell.. Fruity asf.. Since nights haven't been as cool as they were before, the colors seem to have stopped on the calyxes. The old ones are still purple, but the newer calyxes don't have any coloring.. Still a pretty mix of purples and greens.. The leaves look like they should not be an issue when trimming whatsoever.. They are huge.. Even at the tip top of the colas, so far.. The lollipopping could have been kept a node or 2 lower.. I should have nothing but massive top colas tho.. I can live with that.. Lol. I'm still finding my sweet spots with alot of things lol.. Trying to use a LUX Meter and convert to PAR to figure out how much my girls are getting. Lately, I've burned a few tops.. Not too bad.. didnt hurt the yield or trichomes too much.. But noticeable.. So I'm trying to find the sweet spot and still be able to just cut the power of the light down, lower the light toward the canopy so I can also avoid the summer heat which is coming.. So far, I can run this light at 50%, but keeping it about 14 inches above the conopy.. By harvest, I should be able to get away with 75% power at about 12-14 inches.. Just one plant and the footprint of the light is pretty wide.. So it should still get branch to branch pretty evenly.. Stoned ramblin hah! Mid week.. Wow.. These colas are getting massive! She didnt stretch much at all, if any. So, I lollipopped a bit high, in my opinion. But these colas are gonna be so massive, it shouldn't even matter at this point lol. She has ALOT of leaves and they are REALLY getting thick in there.. There isn't much airflow getting around these colas.. I should probably get a fan on there.. Or maybe defoliate a bit.. Not sure really now.. But damn, these colas are HUGE!.. they aren't very long, but holy shit there are getting so fat! Very fruity scent.. Pretty strong but still has plenty of time to get even stronger.. Wow. This autoflower is nothing like the White Widow auto.. That's for sure.. The white widow buds stay kinda small.. Airy.. They must have used a different auto to breed with.. Or maybe the white widow reg. version just isn't a big yielder.. Blah whatever.. This girl needs something changed quick tho.. Either a fan or defoliate more.. Or both.. A growmie just had some bud rot on one of his heavy yielding autos.. Never had the issue before and I don't plan on having it EVER. This is a very good, productive week so far. Next day.. I had to defoliate for sure.. And even pulled the branches down a bit more to help open her up some. I did not expect these colas to do this at all.. I even raised up my oscillating fan so that it's moving air above and below the canopy pretty well now.. Should be fine 🤞... Another thing.. The leaves are SUPER dark green.. The tops have some clawing and the leaves that are hidden away (mostly sugar leaves) do too.. I brought the FloraMicro down to .66 mL/L but I think I'm going to go down a bit further.. My last grow did this too and I went down to .5 mL/L and still ended the run with the issues.. So.. Damn.. Should I just cut it out completely? The colas are already so damn huge.. I just need them to swell up a bit and I can already tell I'm gonna be more than happy with the outcome. I guess I will just bring it down to .33 mL/L.. Eaiser to measure out that way for me too.. She shouldn't struggle or even notice any change.. The only thing I could see hurting is the lack of the Calcium in the FloraMicro.. But I'm going to see if bringing the Micro down that much will help this claw crap from spreading.. So still very happy with this run.. Not bad, ILGM.. Not bad at all.. End of week.. Yeah definitely going down to .33mL/L on the FloraMicro.. I'm sure she will be fine till harvest. No other issues should pop up. She is looking and smelling gorgeous as fuuuuck! She is already so dense and thick.. This is gonna be a nice harvest.. On to the next!...

This week has been awesome. Reservoir has been lasting is pretty well these 3weeks. I filled it with 10gals and have not had to top it up. Dropped the trellis net on the girls to get her to open up more, I will be adding 1-2 more layers of trellis just in case when we flower we make sure to really spread them out. I’m really loving this Autopot 10gals has really gone a long way I just make sure to check the ph and we are good. Next week I’ll be flipping so you will get to see what she looked like before the flip. Thank you all again for watching. See you all next week.

Very Nice 🌱 go lemon 🍋🍋

Not much to be done, watering this week at 6.0 just to ensure there is no nutrient lockout, feeling a little as though these two have been slow in the past week. Buds progressing but feel like it should be quicker at this point. Fourth week of flower

Defoliation on lower branches to improve air flow and future larf. Going into 12/12 for flowering, next week.

Not long left for her now I don't think. Buds are fattening up nicely the main cola is rock hard almost. Ridiculously strong pepper smell to her haha if you give a bud a rub a lovely fruity smell comes through though. Gonna do a week of dragon force next week then possibly start flush depending on trichomes. I have even checked them at all yet but will get it done over the weekend.

Nulla di nuovo se non per il fatto che solo una si sta allungando più delle altre Vorrei defogliare ma non so dove mettere le mani😅 Tutti i rami mi sembrano ben sviluppati anche se sono tutti compatti Apprezzo consigli in quanto ho paura per la poca ventilazione andando avanti Grazie❤️

Six weeks ago I flipped the light to 12/12 and I got to say it’s pretty fast growing. Trichomes looking good. Harvest get closer and closer. 4 of 5 plants are colouring pretty hard. Nice bud to leaf ratio and overall nice appearance. This week I started to lower the temps for terpene preservation. Smell is quite skunky and a little bit fruity. Conditions of the Grow: 💡 PPFD: 1000 umol/m2/s ☀️ DLI: 43 mol/day 🌓 Lightcycle: 12/12 h 💨 Humidity: 45-47 % 🌡️ 🌞Daytime Temp.: 21-22*C 🌡️ 🌙Nighttime Temp.: 19-20 *C 🌡️🌱Leaf Temperature: 20 *C 🌡️💧Water Temperature: 19-21 *C Water TDS: 1000ppm | EC: 2000us/cm 🚰Watersource: Rainwater (TDS: 15ppm | EC: 0.03 us/cm Flowering Equipment: 🔦 Lamp: Mars Hydro FC-E6500 📤Container: 3x DIY 63L Euro-Box with lid Pot: Netpot 2 inch 💦Pump: M.R.S. Ultimate Whisper Powerpump 22 bar 🚿Nozzles: 12x 0.3mm 🫧Waterfilter: 150 microns 🌬️Fan: 3x Clipfan 🌪️Duct-Fan: AC Infinity 200 mm with Controller and Carbon Filter 🍶Nutrient Brand: Terra Aquatica 🔬Sensors: Waterstation (EC, TDS, Temp, PH, Salt), CO2, Air Temp. & Humidity (VPD), Temperature-Sensor Root Container

Day 8 Finally got to check out the plant. Still on same nutrient plan since I'm concerned still about the white dots that are visible on the video I posted. Still very happy to see the growth on the plant. Plant is now receiving about a third gallon of water every other day-ish with 15 ml/gallon of botanicare kind grow nutrients. Day 9 Saw evidence of spider mites. Don't know how they got in since I'm in a grow tent. Got a treatment the guy at the hydro store said would work best since I'm in a small er tent. Sprayed leaves heavily with the spider mites killing solution and turned the lights off since the remedy calls for it and fed 8fl oz water with ~1 ml botanicare. Also bought Canna Coco A+B since I was at the store anyway. Day 10 2-28-18 Evidence of some type of nutrient burn can be seen on some leaves. Possibly a reaction to the anti-spider mite treatment. Any info is welcomed. Opting to keep light on instead of treating for spider mites since I think the spider mites problem is less of a problem than the new discoloration on the leaves Day 12 3-2-18 HELP!!! Anyone please look at the picture I posted and help me with what I need to do asap. TGIF because maybe I can spend the weekend saving this plant. Day 13 3-3-18 Removed the cup from around the plant and added some soil. I think it looks healthier than it has and think it's going to make it.