💚💛❤️

🌱Day 36. Start flowering.💚 🌱Day 38. Keep watering with clear water. Super soil working well.💚 🌱Day 40.💚 🌱Day 42.💚

Down to two plants gave away one to a grower friend of mine...Hopefully I have a male and female here. I need more Skunk #1 seeds for a massive grow.

As week 5 came to a close and we move into week 6 of flowering, I am having really high hopes for the end result. The buds started to get some light orange hairs which is really nice and they are really starting to thicken up! Towards the end of week 5 the plants started to show early signs of burn on their leaf tips, so I started the week 6 feeding a little early. In week 6 we bring the EC down quite a bit as we get into the late stages of flower. I also recently switch to measuring with EC vs PPM for ease and accuracy. Also at the end of week 5 I did a calibration on my coco for each plant as week 6 nutrients are much lighter. Coco Calibration Method 1. Mix up nutrients. 2. Water plants as normal and measure runoff. 3. If runoff EC is not at or close to the inflow EC a. Water more and keep measuring runoff until the runoff is at or close to the inflow EC 4. Do steps 1-3 for all plants (One at a time) Tips: - I use a shop vacuum that I stick the end in the bottom of the pot saucers and leave it on while I water so it sucks the runoff as soon as it drains out the pots. Then I measure, empty and water again until I hit my targets) For this calibration, I ended up using around 6 gallons of nutrient solution. Watering technique used is to measure runoff at every watering and make sure we are staying as close as possible to the inflow EC. It does not matter how much water you need to put through the pots to get to the desired EC on runoff as that is a benefit of Coco. My main goal is to keep my runoff in check and the plants seem to do better than I have ever grown before! The smell off these ladies are amazing and strong. I don't have a carbon filter and enjoy her smells and aromas all day long as my desk is right next to my tent. There were no issues in Week 5. Plants continue to look amazing and the buds are continuing to bud up and structure very nice! I'm excited to see the end result after the ripening and flush stages. Also the colors that are soon to come! Stay tuned! ______________ We are 5 days into week 6 and the buds continue to grow fatter and fatter on a daily basis. I'm really dialing in my EC and making sure to mix it at 1.1 EC and making sure my runoff is from 1.1-1.4. I started playing with the mix as I am getting used to the grow schedule and how the base nutrients effect the EC. I have found that doing 50% of the low strength calendar hits me right at my target EC and I don't have to dilute my mixture after. The smells continue to be strong and fill my house up. The weight is starting to make the colas lean over which is nice because it's opening up the canopy to get more light in. I'm very excited to see what the buds look like in week 7 and then we are on to ripening stage, flush, and then finally harvest!!

Got the dehumidifier out the weathers making the humidity stupidly high

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme

So we are still recovering from light stress. The stress is leaving as shown in the new growth on the top. Some might say this is nitrogen burn.but it cannot be as it's organic, micro dosed alaska fish emulsion. This is my first rodeo as I've been gardening for 20 years now. The only thing new to me is the LED lights. Hopefully those two phenos turn out to be male. Because I just don't see them being very vigorous for the duration of the grow.

I came back after vacation, the girl is ready for cutting, the rainy weather has started, so there is a threat of rot, you can say I managed to find just a few small pits in time and removed them and threw them away, the big and stiff flowers look fantastic:) but after a long trip I was tired, so I didn't take quality photos :( no everything else, I am very satisfied with the result I got:) its smell already lets me know that it will be good:) a lot of sugar leaves from which I will make bubble hash:) I will update the weight when it dries.

Flowering day 11 since time change to 12/12 h. Hey guys :-) The first days of this week it looked really terrible for me because it was much too cold because of the unusual temperature. The heating mat has now also arrived for the big tent and lo and behold the plants have been developing really well since that day ☺️👍. The temperature doesn't keep quite as well as in the small box, but at least I don't get below 18 degrees in the pots at night anymore, even though it's only 16 at the top 😅👍. Since I switched to flowering, it was time to rinse off a bit with Clean Fruits :-) . Did them a lot of good. You have already received the first watering with Grow Liquid and the next in a mix with Bloom Liquid 😀👍. Otherwise everything was cleaned and checked. Stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.exoticseed.eu/de/hanfsamen/lemon-candy Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

Training again. I spread out all side branches so the plant will now collect about 4 square metres of sun. It looks pretty crazy with central branches 6 ft up and side branches flat to each side. Did some defoliation as well. Still very healthy but I had to go through carefully to remove some annoying inch worms.

05/07/2020 definitely another week, #9 flower I think she be done end of week 9. The trichomes are mostly clear, some milky no amber, but I only want 5-10% amber at most anyway as I want daytime meds. Leaves are fading fast will get some better pics soon, one more watering of 2, liters plain water and we are done see you in 7days for the (harvest?)hope and pray! Ps. I do this because breeder says 9-12 weeks but breeder didn't specify 9-12 TOTAL / Or weeks or flowering weeks so I harvested 47 grams wet, at 13 weeks TOTAL, the rest will Be at my peak harvest date which is approximately week 9-10 of flowering. So it's within reason I would say.👍 Pss. The 47 grams wet weight is now at 13.9 grams, (dry weight) after 10 days drying and into the glass jar for burping and curing process . Four days into week (9 of flowering) i brought out my 420 scope still lots of clear trichomes, maybe a 10-11week flowering? Probably my lights need upgrade. See you in 4 days

Chinazes) The nuts have all sprouted, Easy to grow, 70 days have passed from the beginning of the first week to harvest, Incredible, sweet, delicious smell, once you smell this aroma, you can enjoy this smell for hours)) I recommend it to everyone!!)) I will put this variety in the top.

Day 120- Day 72- 11/11 - Still just giving that liter of plain, non pH'd RO water every morning. - Again, not checking ppms in or out anymore, she's ready Day 121- Day 73- 11/12 - Gave 1 liter of water Day 122- Day 74- 11/13 - Gave her last liter of water this morning - Tis her last day! Will cut this evening.

Being lazy this grow yano the score too high

FLOWEEK: 9 Light: 11/13 RH: max 45% TEMP: 22C PPFD: 550 This week, watered only with water, I'm waiting for the trichomes to grow and then I cut them off. I will wait patiently for another 2-3 days. We are now on day 62 of FLO. I had to cut off Kaśka's head because I noticed the beginnings of mold on the top that had no access to the fan. It ended up being just that, so it's good. ✌️

Went on a holiday this week, left her with a new solution at the end of W6 and changed it at the start of W8. Another reason why I absolutely love Autopots.

If you are lonely when you are alone, then you are in bad company. Bee pollen is considered a “vitamin bomb” due to the presence of almost all vitamins with an average of 0.02–0.7% of its total content, with a higher amount of water-soluble than fat-soluble vitamins. Bee pollen contains vitamins A, D, E, B1, B2, B6, and C. It also provides minerals such as calcium, magnesium, phosphorus, potassium, zinc, copper, manganese, iron, and selenium, I mixed a bunch of that with some honey and RAW cane molasses to make a nice big bucket of tea. A family friend who is a beekeeper was kind enough to share some honey. The nutritional content of raw honey is impressive and includes high levels of protein, amino acids, B vitamins, calcium, manganese, potassium, magnesium, zinc, and iron, as well as various polyphenolic antioxidants. I am loading up nature's finest sugars, and sweet things, Honey & Mollases. UV-B-induced DNA damage (CPDs and 6–4 PPs) can be repaired efficiently by photolyases. Pyrimidine dimers can be repaired by nucleotide excision repair (NER), or bypassed by replicative polymerases (Britt 2004). The expression of the CPD photolyase (PHR) gene is induced by UV-B light dependent on UVR8 signaling pathway, and is also induced by blue and UV-A light (Li et al. 2015) https://link.springer.com/article/10.1007/s44154-022-00076-9?fromPaywallRec=true Old but gold. The camera picks up far more light than there is during the night cycle, camera is showing bright pink violet collages but my eyes barely see a thing, about 0.25ppfd in that tent overnight. Have been tweaking the spectrum of moonlight/intensity and watching the responses overnight. Tweak, tweak, tweak all week. PAR is 400-700nm, Overnight UVA in the tent is all 365nm and 385nm, so the meter only picks up a fraction of the light curve that makes it photosynthetically active past 400nm. Of the light in the tent, 0.25ppfd is from UVA Looks like It makes them 🕺 🕺 💃 all night. Better flower soon or ill be screwed for space, they are stretching, but is it "the stretch"? She has fire in her belly. Growing crops with insufficient light (i.e., below “optimal,” as defined here) limits the yield potential, which in turn wastes the other production inputs including labour, water, nutrients and electricity. As lighting fixture is one of the most expensive investment of the production, what is the relationship between light intensity and yield? Potter and Duncombe (2012) grew cannabis plants with varying canopy-level PPFDs during the flowering stage and found that increasing PPFD from 400 to 900 μmol·m−2·s−1 increased yield an average of 1.3 times higher, across seven cultivars, with no light intensity treatment effects on floral cannabinoid concentrations. Vanhove et al. (2011) found that cannabis yields were 1.3 to 3.1 times higher (depending on cultivar) when plants were grown under approximately 1000 μmol·m−2·s−1 compared to approximately 450 μmol·m−2·s−1 during the flowering stage.It was predicted that cannabis yield would exhibit a saturating response to increasing Light intensity, thereby signifying an optimum light intensity range for indoor cannabis production. However, a new research from Morrison (2021), after 81 days‘ experiment, found that When plants grew under LI ranging from 1200 to 1800 μmol·m–2·s–1 provided by light emitting diodes (LEDs), inflorescence yield increased linearly as LI increased up to 1800 μmol·m–2·s–1. "Cannabis will not stop flowering if the lights are turned on for a few minutes once or twice during the 2-month-long flowering cycle. If a light is turned on for 5 to 30 minutes—long enough to disrupt the dark period—on 3 to 5 con­secutive nights, plants will start to revert to vegetative growth." "Less than one half of one foot-candle of light (0.1ppfd) from sunlight will prevent cannabis from flow­ering. That is a little more light than is reflected by a full moon on a clear night. Well-bred indica-dominant plants will revert within three days. Sativa-dominant plants take four to five days to revert to vegetative growth. Once they start to revegetate, it can take from four to six ad­ditional weeks to induce flowering again!" Guess ill find out my answer soon.