Recommended
Likes
Comments
Share
Clones got transplanted into my organic recycled soil in solo cups and under the dome. Under 300w LED QB dimmed at 50% Watering with tap water. My live soil is packed with nutrient's and minerals so there’s no need to add nutes for now.
Likes
18
Share
@xtchill
Follow
On week 4 now since repot Seen some rapid growth this week Started lst the main stem Will wait for the rest to catch up and then the scrog is going up. Not sure if anyone can tell me why the one in the top left is slightly of coloured as its been having exactly the same nuits as the others. Perhaps it's down to genetics maybe.
Likes
127
Share
@DreamIT
Follow
🎃👹👽MONSTERCROPPING RED MANDARINE 👽👹🎃 ____________________________________________________________________________________ 💀 19.2 💀 20.2 💀 21.2 💀 22.2 💀 23.2 vacation week 💀 24.2 💀 25.2 ... ____________________________________________________________________________________________ 📜👀 A look at the details of what I'm growing 👀📜 🍊💚 Red Mandarine F1 🍊💚 by 🌱🍭 Sweet Seeds 🍭🌱 📋 Details ⚧ Gender ▪️ Feminised ➰ Genes ▪️ 55% Indica / 45% Sativa 🎄 Genetics ▪️ Red Poison Auto (SWS39) хCalifornia Orange x Skunk hybrid) 🚜Harvest ▪️ 400 - 500 g / m² 🌷Flowering ▪️ 49 - 63 days ✨THC ▪️ 16% ✅CBD ▪️ 0,2% 🏡Room Type ▪️ Indoor 🌄Room Type ▪️ Outdoor 🕋Room Type ▪️ N/D 🎂Release Year ▪️ 2019 __________________________________________________________________________ 👀📷🥇 Follow the best photos on Instagram 🥇📷👀 https://www.instagram.com/dreamit420/ 🔻🔻🔻Leave a comment with your opinions if you pass by here🔻🔻🔻 🤟🤗💚Thanks and Enjoy growth 💚🤗🤟
Likes
16
Share
@DrLaggis
Follow
🌱 Day 36 - Second Week of Flowering 🌱 Hello growing friends! 🌿 Today marks the beginning of the second week of the flowering phase, and I’m very happy with how the buds are developing so far. 🌸✨ Since this is my first grow, I’m truly amazed by how fascinating these plants are. It’s an exciting journey! 🌱🤩 Last week, I struggled with yellow leaves and a calcium & magnesium deficiency. Fortunately, with the help of BioBizz Calmag, things are slowly improving. 🍃💪 Currently, I’ve set the humidity to 45%—according to my research, this is ideal for minimizing the risk of mold. 💧🚫 🌱 Day 42 - Last Day of the Second Flowering Week 🌱 Hello everyone! 🌿 Today marks the last day of the second week of flowering, and I’ve made some updates to my routine. I’ve increased the nutrients to BioBizz Grow (3ml), BioBizz Bloom (2ml), and BioBizz TopMax (1.5ml). The plants are growing well and have recovered from the calcium deficiency. 🍃💪 I’m continuing to add a bit of BioBizz CalMag to prevent any future deficiencies. 🌱✨ This week, I also added some soil to the pots, as the soil level had flattened out quite a bit. I topped up each pot with about 1.5 liters of soil.
Likes
103
Share
Hello everybody! everything is just great! even there is nothing to say so much everything is good))) I think it's not long left to wait for the harvest .. 2-3 weeks maximum!)
Likes
13
Share
@TPBzh
Follow
They are growing well and smelling good! I defoliate quite often, as it is dense in the tente. They look healthy :) all good
Likes
76
Share
@BB_UK
Follow
Been a great week, not much to say on the dynomyco as it's early stages but im sure to see major improvement over the next week! I will say at this early stage though I do have alot of stable new growth so shows something is working in them roots but as for my females now, wow it's already shown it's work there as I used it on transfer and mixed Into the medium of the rear females so I'm impressed being a first time user! I will say i have learned alot about it following ari and the firebudz team on Instagram, so if anyone needs any pointers check them out they run classes too! Next one is Wednesday at 5pm PST very very educational growmies! Peace and love and stay tuned for greatness 💪🏽💯👊🏽💚
Likes
4
Share
@QixxGrows
Follow
Day8: First day of the new week. I assume still pretty much focusing on roots, as the top didn't really do much today. Day9: Nothing special. But she's growing Day10: Still roots, it seems. Very little happening up top. Day11: Effort being put into growing the top leaves. They increased in size. I assume that the next node will start tomorrow - kicking off the switch into Veg. Day12: Next node already showing :D Day13: I put in a humidifier and changed the cycle of the extractor to keep more moisture in the growbox. My humidity was way too low. Day14: This time the humidity was too high. It was sitting at around 95% when the lights went on.
Likes
4
Share
@pzwags420
Follow
On day 1 I changed out my reservoir. I lowered my nutes to 650 ppm(25% reduction). I adjusted the PH down to 6.1. My left plant has some burnt tips from either PH shift or over fertilization. My hope is that the lower ppm will help to resolve the issue before it spreads. On day 2 I adjusted the reservoirs PH from 6.3 to 5.9. On day 3 the reservoirs PH is 6.0. I installed my new 200 watt HLG Rspec. I adjusted PPFD readings to 700-1300 PPFD on all tops. On day 4 I adjusted the reservoirs PH from 5.8 to 6.2. On day 5 I adjusted the reservoirs PH from 6.4 to 6.0. I diluted my nutrients in my reservoir by removing one gallon of nutrients from the rez and and adding 2 gallons of straight tap water to the rez. This brought the nute concentration from 770 ppm to 540 ppm as the plants will be entering the ripening stage in a few days and they have too much nitrogen judging by the extremely dark green leaves and burnt leaf tips on some branches of the left side plant. The buds seem slightly smaller then my last run which may be due to an excess of nitrogen and maybe not enough light as some of my tops are taller then the others making proper PPFD challenging. All in all the girls are coming along nice and I look forward to the final weeks of flowering 😀 On day 6 I adjusted the reservoirs PH from 5.9 to 6.2. I think I have halted the nute burn as I haven't seen it progressing any more on the leaves. I will continue to monitor closely during these final weeks. The trichome production is increasing with some trichs on top of colas starting to go cloudy. The pistils are turning brown with roughly 40-50% are turning brown all signs I'm getting closer to the harvest window 😆. I dimmed my light to give 600-1000 PPFD to tops. On day 7 I reduced my temps to 75 during the day and 68 at night. I adjusted the PH of the reservoir from 6.6 to 6.1. My reservoirs ppm was too high so I diluted the rez with 2 gal of tap water. This brought it down to 480ppm. The average ppfd to all 14 tops is 604 with no top receiving more than 1000 ppfd
Likes
300
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Burning under control, back to nutes! More and more frosty ❄️❄️ 💪 Will do a big defoliation next week ✂️✂️ 💧 Give water each 2/3 day 2 l Water Only 2 l Water + Bloom + Green Sensation + Sugar Royal (3 + 1 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 50% 26 cm Mars Hydro Fan kit Setting 8 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - Tropicana Cookies FF🌲🌲 https://2fast4buds.com/us/seeds/tropicana-cookies-fast-flowering
Likes
4
Share
broke off 2 branches accidentally an had to remove some leaves because of not enough water. But they look fine to me. You guys got some advices to grow better? (besides of watering more xD)
Likes
4
Share
SUCSESS! I now know for a fact that the pollen did its job. I am 2-3 weeks out from pulling the plug on the lights and giving them the axe. looks like some are starting to mature so I will let them cruse on auto pilot for the next 3 week just giving them plain water PH 6.0 this should use up the dry nuites in the coco and work as a flush as well. Some nutrient burn from the last blast feeding, but I can live with it. I think my PPM meter is out of calibration and it gave me a lower reading than what was in the feeding. I'm pretty happy my first pollen chucking experiment worked. This will be a Feminized S1 IBL " inbred line" The original female that was sprayed with the CS never got pollenated. the other 2 were by me 2 branches each, some may have popped in the tent before. I will find out how many buds got knocked up in 3 weeks. The clones will have some buds on them seedless. so that's it for now. I'm in the home stretch in reality July 17th or so should be the finish line including drying time. soooooo close.😍
Likes
5
Share
La pandemia kush es la más avanzada y se le empezará a regar solo con agua al igual q la Trimosa x mimosa_1 La Trimosa x mimosa tiene un problema con absorción de agua, pero ya está siendo solucionado
Likes
11
Share
@Mr_Terps
Follow
🌱 Growdiaries Report: Erste Woche nach dem Einpflanzen - Elemetz mit Mycohorizza Great White & Advanced Nutrients 🌱 🗓️ Erste Woche nach dem Einpflanzen: Elemetz 🗓️ Willkommen zu meinem Growdiaries-Report! In diesem Bericht teile ich meine Erfahrungen nach dem Einpflanzen der Elemetz-Samen. Diese wurden ebenfalls direkt in die Erde gesetzt und haben nach nur 24 Stunden bereits gekeimt! Der Grow wird durch Mycohorizza Great White und Advanced Nutrients unterstützt, um das bestmögliche Wachstum zu gewährleisten. 🔧 Setup und Produkte: 🌱 Samen: Elemetz – Eine Sorte, die für ihre robusten Wachstumeigenschaften bekannt ist. 🔬 Mikroorganismen: Mycohorizza Great White – Eine Mischung aus Mykorrhiza-Pilzen, die das Wurzelwachstum fördern und die Nährstoffaufnahme optimieren. 💧 Dünger: Advanced Nutrients – Ein hochwertiges Düngersystem, das den Pflanzen zu gesundem Wachstum verhelfen soll. 🌍 Woche 1 nach dem Einpflanzen: Beobachtungen Die Elemetz-Samen wurden in die Erde gesetzt und haben nach nur 24 Stunden Anzeichen der Keimung gezeigt. Es ist ein tolles Gefühl, wie schnell sie auf den optimalen Bedingungen reagieren. Keimung: Nach 24 Stunden sind die Samen bereits gekeimt und die ersten Triebe beginnen, die Erde zu durchbrechen. Wurzelentwicklung: Die Mycohorizza Great White-Mischung wird dazu beitragen, das Wurzelwachstum zu fördern, sobald die Triebe weiter wachsen. 🌡️ Bedingungen: 🌡️ Temperatur: Die Temperaturen liegen tagsüber bei 24-26°C und nachts bei 18-20°C, was ideale Bedingungen für die Keimung und das frühe Wachstum bietet. 💧 Luftfeuchtigkeit: Die Luftfeuchtigkeit habe ich bei 60-70% gehalten, um die Keimung zu fördern und ein optimales Wachstumsklima zu schaffen. 💡 Beleuchtung: Die LED Grow-Lampe sorgt für das richtige Lichtspektrum, das die Triebe nach der Keimung für das Wachstum benötigen. 📊 Nährstoffzufuhr und Pflege: Da die Elemetz-Samen gerade erst gekeimt sind, wurde in dieser ersten Woche nur minimale Düngung vorgenommen. Advanced Nutrients wird in den nächsten Wochen stärker dosiert, wenn das Wachstum der Pflanzen fortschreitet. Advanced Nutrients: Ich habe eine sehr leichte Düngerlösung aus Grow, Micro und Bloom vorbereitet, um die Pflanzen zu unterstützen. Mycohorizza Great White: Die Mykorrhiza-Mischung fördert die frühe Wurzelentwicklung und sorgt dafür, dass die Pflanzen ein starkes Wurzelsystem aufbauen. 🌿 Erste Beobachtungen: Keimung: Die Samen sind nach nur 24 Stunden gekeimt und zeigen erste Triebe. Wachstum: Die ersten Triebe sind klein, aber gesund. Ich erwarte, dass sie sich in den kommenden Tagen weiter entwickeln. ✅ Fazit der ersten Woche nach dem Einpflanzen: Die erste Woche war ein großartiger Start! Die Elemetz-Samen haben nach nur 24 Stunden gekeimt und zeigen bereits erste Triebe. Mit der Unterstützung von Mycohorizza Great White und Advanced Nutrients bin ich zuversichtlich, dass sich die Pflanzen in den kommenden Wochen gut entwickeln werden. Ich werde regelmäßig Updates posten, um den Fortschritt zu dokumentieren. #Growdiaries #Elemetz #MycohorizzaGreatWhite #AdvancedNutrients #CannabisGrow #Woche1 #Keimung 🌱🌿
Likes
29
Share
Cold most of the week. I ran lights 24hrs last few days so temps wouldn't dip below 60. Punch 3.0 may be showing a little stress from all of it. Looking good so far. Video is from Saturday - I normally use the vipar alone for veg, I added the UFO for heat for a couple of days. I expected it to be too much light for seedlings but they are taking it fine so far. I will see if I see a difference in growth from blue to red side.
Likes
22
Share
Day 30 Nulla da dire. Primi peli di inizio fioritura e messo 600w hps A settimana prossima 🖐️ ❤️