Removed small suckers from bottoms and skirted plants near the base. I also did some defoliating in order to increase potential air flow to bud sites and reduce moisture trapping. The dew has been showing on the plants in the morning and rain has been spotting here and there. I have been trying to keep my eye out for bud rot so I can remove it before it spreads however so far so good. I noticed two of the Blue MOB plants do not seem to be doing as well, and also noticed those two plants have roots growing through the 5 gallon bags. The harvest excitement is really kicking in, it smells better and better every day!

Changed solution and they all look healthy.💉🌊 Even managed to get the runt into a bucket. 🌱 Gonna cut some lower growth into clones before the weeks end. ✂️😊

This week went without any problems. They're on scedule and next week I'll repot them. I'm gonna keep 4 out of 5 because I have only room for 4 plants in 15 liter airpots. On day 12 I removed the seedling that was making the least progress. It gave me the opportunity to check the roots and they looked fine. I'll guess it will be the same with the other seedlings. I've already filled the airpots and placed them in the tent so they can heat up a bit. There's a large heating mat (RootIt 40 x 120 cm/ 15.7 x 47.2 inch) underneath the pots to keep the substrate at 21 – 22 °C (69.8 – 71.6 °F) I've given them 70 ml ph-adjusted tapwater + Plagron nutrients( amounts see above) each once this week. Once a day I spray them with a solution of CannaCure and tapwater (15ml + 150ml tapwater, ph level = 6.1) The cobs are at 68 watt with a distance of 49cm (19.2 inches) from the Pineapple Chunks giving a DLI of 19. Temperatures fluctuated between 21.7 – 24.2 °C (71 – 75.5 °F) and humidity between 51 – 94 % I've turned on the Airfan and the fan-controller is set at 30-35%. Up to next week! 🤘 Do you want to grow this strain? 👉 https://www.barneysfarm.us/pineapple-chunk-weed-strain-15 👈

Welcome back to yet another update on my summer grow 😎🤙🏻 Things are still going smooth, a bit defoliation and nematodes was used and hopefully they will do their job in a few days😁 Started to add bloom to the mix, so let’s see how things turn out. As you can see the red spectrum is really working well, and soon I´ll add some small amounts of IR/UV daily. Looking forward to see the result 😊 _____________________________________________________________________________________________ SpectrumX LED🔥 @medicgrow 880 Watt⚡️ 2x UV/IR LED panels 💥 2.7 μmol/J🔥 Full Spectrum V1,F1,VS,FS🌈 Display with PPFD & Live spectrum Light measurement: Apogee MQ-610 & Apogee DLI-600. Fertiliser: Organics Nutrients https://www.organicsnutrients.com/en/ Green Buzz Nutrients Discount Code: GD42025 Grants 25% with a minimum Order value at 75 Euro. https://greenbuzzliquids.com/en/shop/

WELL! What an experience. I made some mistakes, learned a lot and still got some excellent weed out of it. Super frosty, LOUD and SO dense it's ridiculous 😂 Sadly i got some (a lot for me) mold, i encountered for the very first time. With it being almost winter in Germany, the temps dropped really hard for some days and then even 60% humidity was too much for the strain. I also would say it isn't that resistant against mold, so just keep that in mind, the buds are so dense, it's really easy for them to trap water. I had to throw away like 1/4 of the yield, mostly the top buds 💀 That kinda sucked, but it could be worse, it's fire weed tho, i'll add pictures of the buds later.

Might just use pure RO and add Calmag next watering instead of using some tap water in the RO water. Have also added normal colour pics this week! check em out :) Here is my watering so far - it sprouted on the 10th and was still wet enough until 16/10/20 to which i recorded the below; 16/10/20 Fed 1Ltr nutes and then 0.5ltr pure RO 10 minutes after nute feed Root stim 0.5ml Catalyst - 0.2ml Bio-silica - 0.1ml Veg Boost - 0.3ml 17/10/20 - 1ltr fed + 0.5 RO 0.5 ml Silica 2.5ml Root stim 1ml Catalyst 1g Magnesium 19/10/20 - 2ltr 1.5ml veg boost only RO water 23/10/20 - 2ltr 4ml catalyst 10ml root boost 2ml bio-silica 3ml veg boost 25/10/20 - 2ltr +100 ml tap water 1ml grow 4ml root boost 1ml bio-silica 1ml bio wetter 1.5ml catalyst 30/10/20 -2ltr ro + 250ml tap 1ml magne cal 1ml grow 4ml root boost 1ml bio silica 2ml catalyst 1ml bio wetter 01/11/20 - 2.5ltr ro + 300ml tap 1.5ml grow 2ml cata 2ml bio wetter 5ml root stim 1.5ml bio silica 03/11/20 - 2.5ltr RO 1 full teaspoon of molasses with 100ml boiled filtered tap water 2ml bio silica 2ml catalyst 3ml root stim 2ml bio wetter

Outdoor are starting to show sex; Indoor starting flower

Very good

Mazar has a unique design that has us in awe, this is definitely a rare looking plant with features that remind us of strains that grow in far away lands. Our only upset with this girl is the powdery mildew that has started to set in, this is disappointing at this stage because we prefer not to use any type of spray. We used tap water with a ph above 9 to see if that would help, regardless this is a sign that she may not be the best strain for outdoors in our climate. Epsom salts have been added to our rain barrel once a week and Mazar has had a few dustings of coffee grounds added to her soil bed. Either way we appreciate her beauty and hope she can stay free of the rot as the bud thickens and the cooler air sets in.

We started to change color! Thats amazing guys! This is my first purple flower! Cant wait to check it out. Look on photos! What do you think about defoliation or banding? Wanted to leave it with our any trainings, but now Im not sure...

She's unstoppable. Looks like we are about to be in pre flower. It's show time.

Week 7 begins for LSD. She's bulking up, packing lots of frost and she's got a killer sweat berry citrus smell. Switched out big bud coco for overdrive. Thanks for stopping by, tune in next week for another episode 👽🌳🔥

Greetings my dear Jungletamers, So a major surprise came when @MarsHydroLED contacted us and asked if would like to try out their new SP 3000 light. Being a fan of Mars Hydro for years, we of course accepted their offer. We are totally in love with this light. I was when I saw it in another grower's setup and was in awe of its output and results. So with much pride and thankfulness for the presents the Universe bestowed on us, in the form of MarsHydroLEDS offer and the bountiful harvest of the last grow, (which I am thoroughly enjoying btw, such a great weed to have grown ourselves) we start out on a new adventure that we can't wait to share with you. With many lessons learned from the previous grow, a mighty producing strain in the form of Expert Seeds Gorilla Glue #4, a.k.a Expert Gorilla's and a tweaked super soil mixture, we are setting out to hopefully get over a gram per watt, preferably 1.5. The Setup A 4.5 (140 cm) x 2(70) x 6.2 (200) grow tent, giving me a .98 m2 workspace. This space is customized to my needs. A standing fan will provide airflow through the whole grow, a top fan will help guide cooler air past my lights onto the grow. 3 56 ltr pots will be the home for the plants when they are 2 weeks old, up to then in smaller jars. The Light The leading role and star of the show will be played by the Mars Hydro SP-3000, so kindly provided by MarsHydroLED, which we will test and review here and I might say, endorse. I'm very careful with who I endorse and support these days, but a company with that many wins in design, I'm talking ever since their first range came out in 2009 these guys have been raising the bar for the whole industry, I did not hesitate to support this leading brand. If you want to compete with these guys, you better bring some quality AND affordable pricing. Why do I endorse the SP-3000 without ANY hesitation? It is seriously THE BEST light on the market in this price range and size group. It has an enormously effective output in U/Mol and with 30% less energy waste comparing to older LED lights. Prove me wrong! And with a company holding a considerable market share selling thousands of units every month, competing on price and quality, one would think that customer service would suffer. Of course, also Mars Hydro is not perfect, but check the sheer amount of people that not only praise the light but also the service received, should the light somehow not perform up to par. It is this dedication to their customer base that made this company have a fanbase... Yes, a fanbase with a website and a wiki. So if you are looking to buy new lights, check out the END OF SUMMER OFFER at the Mars-Hydro Global Store on Aliexpress: https://marshydroled.aliexpress.com/ 👈 Check their offers but also their score, they ship from a warehouse near you so you don't have the extra import fees!! Cut out the middleman and have a deal on these lights!! At the moment I write this in August 2021, the lights are 408,20 euro when sent from Germany to the rest of Europe, that's 40 euro cheaper than the other Mars outlets, BUT EVEN 60 euros cheaper than ordering at a grow store!! The Strain: Experts Seeds - Expert Gorilla feminized regular. Don’t let the name fool you because Expert Gorilla is suitable for growers of any skill level. However, you do need to be an experienced smoker because Expert Gorilla is one of the most potent strains on the market. Lineage: Chem Sis x Chocolate Diesel x Sour Dubb Popularity: Extremely Popular Flavor/Aroma Profile: Chocolate, Earthy, Fuel Yield: 400 g/m2 Stress Tolerance: High resistance to disease Potency: 24% THC Flowering time: 58 - 63 days The Soil: Those who saw my Monstercropped Gelato #33 grow (you should see it if you didn't, I'm so proud of that grow), know about my super soil and organic nutrients/ permaculture tea combo that starred in my previous diary. Because of the great results, we are going to use the same recipe, adjusted some more with some new ingredients that will complete the mix and give an even more sustained super soil buffer. 20% Atami Bi-grow (very similar to ocean forest) 20% Atami worm castings 20% Atami Coco Coir 10% Hydrocorn 10% Peat powder 1 cup Fossil seaweed chalk 1 cup bonemeal 1 cup bloodmeal 1 cup Microlife 3-4 teaspoons of epsom salt 3 cups of activated biochar (activated with our own permaculture tea) I just made layers, starting with hydro corn on the bottom to aid airflow/run-off. On this I started layering the coco coir, Bi-grow, peat, castings, and amendments in a way that the more mature the plants get, the more phosphorous and less nitrogen they will find. Every time I made three layers, I would mix them by hand. This way we simulate natural soil, which consists of humic layers, composting plant waste, fungal and microbial life, and nutrients from fossilized sources. The Nutrients I will start with just adding 6.4 PH water, although this soil should buffer ph itself and regulate, after 4 weeks, I'll slowly be adding: - Biobizz Grow - Plagron Alga Grow - Biobizz CalMag - Biobizz Flower - Plagron Alga Flower - Biobizz Topmax - Melasses The Tea Some of you might remember the permaculture tea from my previous grow, I have a short video in my harvest page showing how we make it), it will star again in this grow. - (Rain)water - Comfrey (whole plants) - Dandelion leaves - Roots and leaves from the earlier grow - Minor periwinkle (Finca minor) is a plant we have in our garden, it contains an alkaloid that is associated with increased brain function but also is a light toxin for wee beasties and other unwanted guests like gnats (who hate it). - When flowering I add some wood ash to this mix Thank you for checking in on one of my grows again! Thanks for all the love on my previous grow, check it out if you haven't seen it!! Hug Bud

Very Nice looking and good Smelling Plant. Buds after Trim are medium dense but very tasty. Flavourwise it goes into ripe Berrys with a hint of Citrus and Soapyness in the background. The Plant looks exactly like on the pictures High-Giraffe-Seeds shows on their website. All in all definetly a recommendable Plant to grow.

and now it gets slowley vvveeeeryyyyyy slowly to harvest. i cant whait to taste her.. . huh that sounds wierd welll. i think a month more maby.