Likes
Comments
Share
@MrWolfe
Follow
So this round I just lollipopped and didn’t strip the top at all, with better veg next round it’ll work better but I’m having issues with some plants not quite trellised how I’d like. Everything smells great, BCS,BD and WM are getting fat and PKB is frosty and tight. Watering is more of a chore than I’d like I think I’m just going to use some 5s for the next round . Thanks for following along I hope your buds are fat and frosty.
Likes
42
Share
@MrGrow
Follow
30.11.2021 48 giorni di vegetativa, purtroppo in settimana mi sono accorto che tante foglie di una delle 6 piante presentavano strane macchiette bianche, e sulla parte bassa vicino alla base c erano delle piccole ragnatele. Da un paio di giorni sto trattando le piante con olio di neem, spero di risolvere in pochi giorni per poi applicare lo scrog e passare alla fioritura. Aggiornamento la pross settimana🙏💚
Likes
9
Share
@MMVSS
Follow
So I'm Upset That She Didn't End Up Being A Mutant! ABC AND STEALTH FIGHTER COMBINED AND IT DECIDED TO GO WITH MORE STABLE GENES 😆 Don't Worry Some Mutants Did Pop In Other Parts Of My Garden I'll Make A Journal Soon! For Now We Will Just Pray This Is A Girl! She Due For Her Topping Today! She Exploded Once She Had Some Roots And I Blacked Out The Glass With Painters Tape! So We Flip Very Very Soon! One More Week! This May Not Look Like Much, But Considering Her Constraints, It's A LOT! TERRA POWER!
Likes
33
Share
@dutdut
Follow
Put the girls in a new tent. It’s 5x5 with a 1k hort and xxl air cooled hood. The are getting their lean on, had a few branch casualties but every is looking good, started to flush the plant with Ph’d water and 1g maxibloom per 1 gallon.
Likes
41
Share
Bewässerung: 30000 ml jeden 3 Tag in der vierundzwanzigsten Woche pH-Wert: 6,3 EC-Wert: 1,6 mS/cm Temperatur: 24ºC Luftfeuchtigkeit: 60% Schädlingsbekämpfung: Raubmilben Düngemittel: Sie bekommen ab jetzt Brenneseljauche da sie im Outdoor Bereich ist. Besonderheiten: Der Boden um den still herum wurde mit Holzasche behandelt gegen Meltau. -Tag 157 Sie will einfach nicht Fertig werden, Ihre Buds werden zwar immer dichter aber noch lange nicht fertig, so wie es heute aussieht dauert es noch minimal 3 Wochen oder 4 -Tag 159 sie wächst weiter und die Blüten werden immer dichter, manche bekommen leider Schimmel diese schneiden wir dann ab 😩
Likes
8
Share
@Hawkbo
Follow
On cruise control now, done some defoliation here and there but that's it, feeding every 2-3 days and they are swelling up very nicely. I took a nice slow video instead of photos of each plant individually below is the order they appear in the video. 1st is 31? 2nd is #29 3rd is #35 4th is Orange Sherbert 5th is #33 6th is Wedding Cheesecake 7th is Wedding Cheesecake #2 8th is #37 REMEMBER , IF YOUR SHOPPING FOR GEAR YOU CAN USE THE CODE “BANGDANG” FOR 10% OFF YOUR ENTIRE PURCHASE FROM ANY OF THE FOLLOWING COMPANIES. @greenbuzzliquids @rainscience_growbags @gorilla_grow_tent @growlightscience.led NEW* @Rocbudinc Seeds on his website * *****Gorilla grow tent discounts extend to all companies affiliated with grow strong industries which include..***** @super.closet Lotus Nutrients Kind LED grow lights
Likes
5
Share
03/01 - Day 57 All the girls have their pistils changing colors, buds growing by the day, (B) has has very sweet aromas coming out, & (C) is more earthy and peppery. Still losing some fan leaves here and there on (A) & (D) from the Cal/Mag & Phosphorus defiance but nothing like 2 weeks ago. 03/05 - Day 61 Enjoying the process and maintaining the environment. Buds on (B), (C), & (D) are starting to get heavy. Maybe some foxtails starting on (C)??
Likes
410
Share
The gals are still loving the fc4800 and their new 8x8 mars hydro grow tent as much as I do👍 leaves are sticking straight up towards the light. Love how easy the zippers are to open and close. Nice and strong and guaranteed to last. It has extra material on the backside of the zipper that helps for light leaksand enough ports and vents for anything you need in it👍. the tsw2000 is still going strong and is also a very good light. Its been going almost nonstop for 6 months and still working the same as when I got it👍. not much heat off both lights but the fc4800 is alot cooler and the heat-sinks work extremely well. I have it daisy chained to the tsw2000 and 1 dimmer controls the other and i don't need to be reaching in too far to dim the other light, it's awesome and I can't wait to buy more lights to daisy 4 together👍. I would recommend this light to everyone that grows with leds and have trouble with temperatures getting too high. Even if you grow with HPS lights I think any mars hydro light is a MUST TRY. I like how heavy both lights are because I know it means they are built soild and strong 💪. FOR EVERYTHING MARS HYDRO VISIT: Www.mars-hydro.com PROMO CODE: rocknroll Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
12
Share
I subjected her to my version of "light" HST this week (i.e. I snap the stem ~20cm from the top so it's broken but attached, then I massage/twist the broken stem between my fingers until it's crushed and soft, but I don't tip them 90° instead I leave them standing tall). I normally tip them 90° bit this is something I started to do recently and it's more convenient with bushy tight plants (imo).
Likes
15
Share
@Philhsy
Follow
They go fatter day by day, still clear trics, and some nuggs are littel under developped further down stem, but massive colas covering the whole surface, smells like fruity candy and sticky as hell, resun production is insane. I just dont eant to get mold drying this, any yips? Whole plant or chop of piezes and hang or dry net, colas are real fat and rock hard.. counted round 35 top colas
Likes
25
Share
Jour42 defolliation and LST Jour45 defolliation Jour47 arrosage avec de l'eau ph6.3 à laquelle j'ajoute 1ml par litre d'eau de topmax biobizz La plante entre maintenant en floraison c'est donc le début du stretch Explication en anglais (Stretch explanations more) EXPOSURE TO LIGHT One of the main culprits in abnormal stretching of cannabis plants is the lack of light. Plants that are too far from an adequate light source will respond by accelerating stem growth in order to get closer to the lamp themselves. Especially when there are many other plants. A lack of lighting can easily cause overcrowding in a growing chamber, reducing the steady progression of your crop and the distance ratio between your bulbs and your plants. To address this problem, be sure to provide enough light to your plants to prevent stem growth. At the same time, you should not position your lights too close to your plants either since this would also result in an over-stretching of the stems and in some cases, the loss of your crop. In addition to the distance between the light source and the plant, the type of light you will use also affects the size of the stretching of your crop. The orange and red lights encourage stretching and result in thinner, larger stems. And conversely, blue light stimulates a growth of thicker stems and a smaller size. When a species is ready to enter the vegetative phase and undergo its most drastic stretching period, metal halide lamps can be used to deter far too long stems. THE HEAT Heat is another essential element that can determine the stretch size of your plants during vegetation. Temperatures above 27 degrees push the stems to lengthen more and more and will propel the potential of sativas to push as high as possible. Heat lamps that are positioned too close to plants create an intolerable environment that will grow large, soft plants that will potentially wobble until they fall and lose flowers in its fall. OTHER CAUSES OF STRETCHING There are multiple variables that can lead to the stretching of plants beyond what could normally be expected of the plant. Environmental stressors resulting from transplantation (when a plant passes from one pot to another) can cause the plant to return to shock. This will eventually trigger a reaction causing a stretch. Cannabis plants that are not grown in decent conditions or do not receive enough nutrients will respond in a variety of ways and this includes stretching. Crops that are not spaced far enough apart are likely to stretch to sting the light to other plants. Due to extreme proximity, the plants will fight among themselves to reach the light, forcing them to expand as much as possible throughout the crop. HOW TO CONTROL STRETCHING DURING FLOWERING Stretching during flowering, you guessed it, takes place when you move your plants from the vegetation stage to the flowering stage. This is a completely normal reaction, as your plants are preparing to bear the weight of their heads. Stretching of a plant at the beginning of flowering varies widely; some plants can double in height while others grow only a few centimetres. There are, however, two main variables that can give you at least an idea of how your plants are stretching during flowering, and how much. Here are these two variables: Variety: Genetics has the greatest impact on the size of your plant. In general, sativa varieties stretch more than indicas and tend to develop long, slender stems. Light: Some lights, such as HPS, are more likely to encourage stretching. In addition, great distances between your canopy and your lights will cause the plants to stretch as they try to get closer to the light source. Stretching during flowering usually lasts the first two weeks of the phase. To minimize stretching, keep your lights between 10 (for CFL) and 30 centimetres (for HID) of your canopy. Finally, choose indica varieties if you have a smaller growing space. HOW TO AVOID STRETCHING In many cases, you can expect your cannabis plants to stretch during the flowering phase. Keeping that in mind helps to make a plan in case your species ends up growing much more than you could have imagined. If the information is available, get information on the standard size of your species and compare it to the size of your growing space taking into account the necessary distances between the bulbs and the plants. TRAFFIC While outdoor crop operations benefit from natural air to naturally limit stretching, indoor crops must assume the maintenance of air circulation within a confined space. Basic ventilation is enough to help the cannabis stems strengthen and become thicker rather than too high. In this way, the plants continue to grow vigorously without reaching heights and at the same time, your tolerance ceiling. MANUAL INTERVENTION For growers who want to get their hands dirty, there are physical procedures that can be done to reduce stretching. Similar to the natural effect that the wind has on cannabis plants, manually bending the leaves and stems will cause tiny cracks in the plant's tissues that will cause the plant to focus on regenerating its wounds instead of its vertical growth. THE TOPPING Topping is a form of manual intervention on cannabis to influence its performance, shape or size. In essence, topping is a process in which a new node is cut, growing from the plant to reduce its size and create a "v"-shaped notch that will eventually form two heads. Topping may be an effective measure to combat stretching, but it is important not to do so when the flowering phase begins. In most cases, an abnormal stretch of cannabis plants will not completely destroy your crop. In fact, stretching can indeed help increase your performance. For growers with a growing operation large enough to contain tall plants, stretching can increase the total yield of a species with more vertical space for head formation. In both cases, stretching can easily be planned in advance and there are multiple solutions to help you with this problem which is all too common. May the force be with you 💪
Likes
47
Share
@S2340420
Follow
This was a good grow couple of ups and downs weather wise and the moment of devastation when seeing my fattest cola had been affected by bud rot this was a solid happy nug yesterday and today well thenpics tell a tale all other buds were fine and are drying as we speak ye win some ye lose some some are just fkin annoying
Likes
21
Share
Привет друзья. Моей растихе сегодня 34 дня. Начал применять LST технику на 19 дне и продалжаю применять её через день, а 18 августа добавил ДЕФОЛИЗАЦИЮ С 20.08 ДЕФОЛИЗАЦИЮ делаю каждые 3,4 дня С 20.08 применяю технику LST каждые 3,4 дня На сегодняшний день влажность 63% Растение растёт хорошо. генетика радует. Всем мира и добра! #Smail_Seeds
Likes
1
Share
@Franco123
Follow
hi, the plant is growing well but this week it has shown its sativa side, stretching with some heads upwards more than the others and on one I had to do a super crop to keep it from burning from the lamps, I don't want to turn up the lights because the other plants are fine like that and if I move the lights away they will have stretched too, the smell has increased and I think she's the one who smells like sweat/cheese and who I'm curious to taste
Likes
9
Share
@Xabii
Follow
Starting this week I will also add Oxygen granulate (KMPS, CAS-70693-62-8, 2KHSO₅ * KHSO₄ * K₂SO₄) I use this once a day to reach ~250 mV on my ORP meter, it is not calibrated so it more of a good guess, adding this helps to keep the reservoir stable even with higher nutrient temperatures in summer and it also adds a little Kalium/Potassium for the plants. The ORP probe is not calibrated and values are to be taken with a grain of salt. Values are average of the day. DATE - °C - RH% (Tent Temp/RH) 20240725 25.2 52.4 20240726 25.7 61.0 20240727 25.1 63.6 20240728 24.4 57.2 20240729 25.5 55.2 20240730 27.2 54.4 20240731 27.2 61.7 DATE - PH 20240725 6.16 20240726 6.05 20240727 5.88 20240728 5.90 20240729 5.92 20240730 5.94 20240731 5.95 DATE - ORP (mV) 20240725 20 20240726 23 20240727 23 20240728 19 20240729 18 20240730 18 20240731 15 DATE - EC(us/cm) 20240725 1990 20240726 2060 20240727 2137 20240728 2119 20240729 2152 20240730 2186 20240731 2211 DATE - CF 20240725 19.90 20240726 20.60 20240727 21.37 20240728 21.19 20240729 21.52 20240730 21.86 20240731 22.11 DATE - °C (Reservoir) 20240725 21.6 20240726 22.0 20240727 22.4 20240728 21.4 20240729 21.6 20240730 22.4 20240731 22.5
Likes
33
Share
Buenas gente estamos aquí con la 5 Semana de El Patrón estamos echando el producto grotek una vez por semana está dando un buen resultado va creciendo fuerte y con un aspecto muy bonito y emos bajado el foco a 30 cm en general esta semana a ido muy bien an dado un buen crecimiento.👌👌👌😉 Vamos a ver en el concurso de RQS!!!!🔥🔥
Likes
2
Share
She seems to be overfed, showing yellowing here and there. Also other has some leaves have brown spots. I might have messed up the Ph because I did not adjust the Ph of nutrients mix. I assumed it was ph corrected. Now, I am adjusting the Ph and reducing feeding. Let’s hope that she recovers next week.
Processing
Likes
3
Share
Increased their food by a tad. Looked perfectly health raised to about 1900ppm. Again spider mites at it crawling up every leaf and creating a colony. I thought it was over until I sat there nearly every night finding the f*****s and rubbing the leaves with the spray. Defoliation was needed ASAP due to them stretching nicely. Started slowly from the bottom up. (repeated this process every 3-5 days.)
Likes
3
Share
Kleines CalMag problem.. und Zeitschaltuhr für eine Nacht ausgefallen. 🙄😅🍀 mal abwarten...🚀
Processing
Likes
17
Share
On Tuesday last week I burned my plants, particularly #1. Everything was going very well so I thought I'd add a little more nutrients to get some bigger blooms. That was a mistake! I flushed them with just tap water and trimmed off the leaves that were badly burned. Yesterday the plants were looking much better and I introduced a fraction of the nutrients that I was feeding them before. Plant #2 is starting to get covered in trichomes though there aren't any on #1. With a jeweler's magnifying glass and my phone I did my best to take pics of #2's trichomes. It's not so easy to see in the pictures but in person they all look clear. I'll wait until they're all cloudy and some are amber to chop it down.