Likes
Comments
Share
She's getting denser every day, down to ph'd water only, maybe another week before chop.
Likes
18
Share
Was away this week but plants seem to be fine slight yellowing on the tips of the zkittles new leaves. Soil is very dry as they haven’t been watered in 5 days. Only slight drooping in some of the leaves though. Will be watering after this post. The buds seem to be developing nicely.
Likes
7
Share
@Nikkov
Follow
Well, another week has passed and it has been growing not exactly as I expected, but they warned me about using only base fertilizers with an inert soil and a higher ambient temperature, I could have a not so good result, well, it's one more experience and I liked it and let's see how it will be until the end of the cycle because the next one I already ordered a starter kit from the advanced nutrients line! Let's Go!
Likes
18
Share
Did first nutrient feeding w fox farms nutes. Very little. Things were going perfect then I woke up this am to slight curling again. I changed light distance and put in my other light as well so I’m now in need of ac unit or another fan bc it’s getting hotter, 85. Or I figure I could run my exhaust fan 24/7 and take it off my humidity switch but then I got to possibly get another humidifier bc the exhaust fan takes the humidity out of the room. Idk but the girls all in all are looking good to me. started lst on 6/30 using grow big and big bloom now
Likes
15
Share
So I ended the week with a defoliation and removed about 30 leafs to help increase light penatration because I'm only running g the light at 75% because of a few close buds to the light. I'm heading to my storage tomorrow to get a different light that's a 100w quantum boards style led. It's 30W less but I'll be able to get a bit more space between the light and the plants. Next to that nothing else new. Happy growing everyone!!!!
Likes
3
Share
prima settimana, germinata il 17 dicembre temperature: 22 gradi 60% rh luci accese 15 gradi 60% rh luci spente
Likes
Comments
Share
Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme
Likes
4
Share
Processing
Likes
17
Share
Likes
63
Share
**Glass of water AND Paper Towel** ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 08/17/21: 😺 These seeds resulted from a stressed Green Crack pollinating one of our GDPs..we've found about 18 seeds total in the entire plant...we soaked 10 seeds in water for 36hours (tossed 2 seeds after 12 hrs and still not sinking) and then we put them in a paper towel for 24hrs, we actually do this with all our seeds and have always had great success, we plant everything indoors in Promix and this includes seedlings...of the 8 we'll likely keep 5-6 of the best looking seedlings, not too many because we'll need to keep a closer eye on these come flower but i'm super excited to see what will come from our unintentional cross.., thank you for reading if you made it this far and happy gardening!!! 😺❤️💡🌱 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 08/20/21: 😿 Of the 8 seeds, only 1 showed taproot, so we soaked another set of 8 seeds and again, only 1 showed taproot...these seeds don't seem too viable with only 2 of 16 seeds sprouting but we'll give them some time to come around.. we planted the 2 seeds in 1 quart nursery pots today, that contained a 50/50 mix of new and used promix, with a sprinkle of lime and EWC.. fingers crossed!! 🤞🐱🤞 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 08/23/21 😺Sweet Jesus we have life lol.. neither of us can remember a seed/seeds ever geminating this slowly, it has taken nearly 8 days to break the soil and it's barely breaking it (there's 1 other seedling behind it)...we don't have a ton of faith that these plants will perform well or have a ton of vigor but we're holding out because they may surprise us..thanks for reading and happy growing!! 😽💨
Likes
5
Share
@Anditsch
Follow
No problems while drying. Really strong smell while drying you should use a filter-system for that.
Likes
26
Share
@MG2009
Follow
02/01/2021 Going to sprout my last 2 Bluedreamatic seeds from (fast buds). Will be sprouting in mini greenhouse on heat mat. Once seedlings are ready they will be moved under 1000w MH for veg and flowering. 10+hours later they are on bottom of water and time for paper towels in baggie. 02/03/2021 1 seed sprouted and I dropped the other in soil 🙏 I hope because it disappeared! So got at least one Bluedreamatic on the way hoping to see other one sprout in mixing tray. 02/05/2021 She's above ground! Day #1 , currently under 150w compact flourecent 3 way bulb when first true leaves form (Not single finger let)I will start veg cycle under 1000w MH see you in 3-4 days for weekly update. topped seedling pot with vermiculite 1/2-3/4 inches leaving the cotdtyledons 1/2-3/4 inches above surface. Roots should fill up this container quickly, moved under1000w MH light for vegging. Seedling is 3-4 ft away from light but also off to the side no serious heat just about room temperature. I could not feel heat from light where I put seedling, comfortable on your skin is good for plants. 02/11/2021 It's day #6 above the soil, she is doing well already grown 2" above where I topped with vermiculite. At lights out I put her in humidity dome with my tomato seedlings main area of grow gets very cool at night,so I try to keep her at a better temp 72°f.
Likes
17
Share
This week ia am planning to let it grow just like this. Hopefully I will receive a plant camera next week to monitor my VPD. Also added an IRheater to keep temperature stable The infrared heater does its job, but I find it a waste of electricity, 3.6 kWh in one night. So I've decided to install a gas heater instead, which delivers the same result at a much lower cost and also provides additional CO2. The heater can then keep the temperature above 21˚C with the lights off. The natural gas heater will be used with the lights on. I need to quickly find a CO2 sensor because too much CO2 has a counterproductive effect, as I've already noticed. Approximately 1200 PPM at 32˚C is optimal as long as I can maintain a DLI of 35. Great technology is on the way. Added: Installed CO2 burner, run it for 6 minutes every hour. Temp raises from 22˚C to 27˚C in about 7 minutes. CO2 detector (just colors, no values) doesn't alarm so not above 1500PPM CO monitor also no alarm :) Running for 4 hours now and a visible change is there. Tomorrow I will know if it is ok or not. Added a few pictures. Lets see if we can see the difference tomorrow. 26-05: Added Dimlux Maxi controller for CO2 and VPD. Works nice. 28-05: Topped a few 31-05 Added additional 300W to heat the stuff up. RH is stable but high on 72%. Could add a dehumidifier but since CO2 is already there and my VPD is around 0.8 I thought adding light would be cheaper. Can go up to 33˚C before my floor is heating up too much. Also cleaned the watertank. So from now on they are on Ata Max
Likes
93
Share
@Ferenc
Follow
Week 10, so from today I stopped watering the Gelato Cookie D'ohpe and on Saturday no more light as well. Sunday is harvest day finally. Not much changed, I raised up the water with 25ml so the Purple Punch gets 200ml 2 x a day. That's all, since last week I started giving 13 hours darkness and 11 hours light and from Monday will be 12/12 after I harvested the Gelato Cookie D'ohpe and I can use the tent only for her. Fertilization will happen on the same days. Sunday fun day, Gelato Cookie D'ohpe is harvested. Purple Punch left alone. From tomorrow I will switch the light schedule 12/12. End of the week Purple Punch is 43 cm.
Likes
8
Share
@SkunkyDog
Follow
Hallo zusammen 🤙. Habe sie heute geerntet. Sie wird jetzt 3 Wochen trocknen und dann kommt die Beurteilung. Bis in 3 Wochen