40l bowls with new living soil mix 10% 4 plants in a tent with mars hydro FC-6500 4 plants in a tent with 2 SANlight 5 150 Ab heute laufen die Tests der Lampen die für zukünftige Grows benutz werden könnten

I hot climates pests are pain in the as$ I had to do something about pest management and i found neem oil with wood vinegar in s going to help me as an organic pesticides. I apply every week until flowering .my fabric pots getting dry to fast with this experience now i know fabric pots under 100 liters capacity are not meant for living soils in hot dry weather.

Day 37 - Everything looks good.... they are drinking so much.... i built a bit more stable light setup, and i'll need to buy afew more plugs and stuff, to fill it out ...... i organised all the 2700k globes, ready to swap in..... still waiting on the exhaust fan, so i'll keep em in "grow" mode another week or 2 .... i'm vaping a leaf or 2, and drinking "green tea hot chocolates" .... it is so delicious in hot chocolate .... my health has picked up since starting the vape/drinks... the 21 thc/19 cbd is supa healthy ... Day 38 - Getting them ready for Flower, noticed they are lacking in nutrients, so i started em on the heavier dutch master gold flower nutrients. Day 40 - Added some pics. (they look droopy because they in night mode, just turned on lights for pic) - Started them on 12/12 flower, still working on getting all the lights, gear, and globes, for the right spectrum and amount of light.... atm got - 7x 2700k (click) , 2x 6400k (osram), + 60w light panel .... i'll go get some more gear today and hope to expand it to 10x 2700k , 2x 6400k ...... I put the exhaust filter fan on seperate power, so it doesn't go on/off with the timer, but stays on all the time.... it totally fixed up any odour problems, haha ....... Added some different pics for my light spectrum ... etc..... the outside winter temp is now at 40-60oF (5-15oC) so with the 12/12h, the temp inside the tent is dropping to 60-80oF (18-22oC), abit low, but flowering is supposed to be in winter, so idk, see how it goes..... I'm new to growing, so idk how this will work out....... just working it as i go.... i noticed afew spots on a leaf, so i upped the neuts abit more, they are still drinking like fish, huge amounts.... Day 40 late - new vids - Got the extra gear and installed it all... redesigned the initial setup, refined it with proper measurements, had to get my steel rule out, lol....... got the 12 leds in and running, 10x 2700k clicks, and 2x 6400k osrams, with the panel..... it's lookin beautiful and got the exhaust on 24 hrs now, all working perfect with 12/12 timer.... they are forming a few spots on leaves, so hammering the nute water into them now... they are drinkin 1-2 litre of nute water a day each.... (nute water = Dutch mater gold one grow/flower, 800-1000 ppm 6 PH) 😎 Some details about lights.... i did some maths on it, and included some handy pics..... because i'm using cheap leds, i'm keeping the distance at 25cm, they are leds so they won't burn, and it massively increases the lumens/lux/Par, and with my home built light setup, the leds are spread out enough to keep it lower.... worked out good..... something of note is that all the led globes are built/made in china... however different marketing/selling companies from around the world... and the german osrams are 1w leds ... by far the most superior, but anyone can design and send the requirements to china to build em, haha) it's not a contest, we all work together.... haha.... the person with the best led light globes gets my business, because i want the best for my babies.... :) (let me explain- 1w led vs 0.5 w led, the watt of the led projects the light, lumens, LX/PAR etc much further the higher the watt of the led....my 600w panel has 0.5w leds, the philips has 0.75, the osrams have 1w leds..... ) each globe philips (dutch)- 10.5w internal - 14 leds 0.75w 1055 lumens each globe osram (german)- 10.5w internal - 10 leds 1w 1080 lumens each globe click (cheap)- 9w internal - 16 leds 0.56w 800 lumens light panel - 70w - 600w 30 red - 8 red 12 blue - 8 white 7500k 1 ir - 1 uv = 20x blue 6400k - 38x red 2700k internal - 60 double leds - 120x0.5w 6000 lm

Die Samen wurden für 48 Std in Wasser gelegt, als sich die ersten wurzel zeigten wurden die automtiks in den endtopt (11liter) und die Feminisierten erstmal in einen kleinen Topf, wird später umgetopft

Superb variety that I discovered, very tasty with sweet smell cheese and productive. I place it in my favorites, To be redone in a future culture Instagram : https://www.instagram.com/hou_stone420/ Very nice and simple grinder that i reccomand : https://shop.greenhouseseeds.nl/merchandise/hemp-grinder/

Weird germination process: among the whole tent I had few duds so I had to replace and select. I noticed from the start that the seed didn't germinate correctly having kept the membrane closed tight on top, inclusive of seed shell. I manually removed the redundant seed shell and membrane myself. Germinated using the wet towel method, then planted with michoryzae powder as added boost. A couple of days later I have noticed that the top wilted while suffocated in the shell, however it is already sprouting a perfect "Y" " self-topped" shape to die for. I wasn't planning to train any of the plants in this grow but I will do it with this MOBY DICK: this strain is a high yielding sativa that has historically given me a consistent large harvest each time. It can bush out very quickly and I would have to allocate half a tent just for her.

Second topping sur toute les branche principale…. Désolé pour les photo vidéo peut être sa correspond pas au semaine parce que je post pas temp réel les photo ou vidéo

Harvest Time! Meine absolute Lieblingszeit beim Growen! Nachdem die Lady ca. 1 Woche ohne Wasser war, wurde sie unten am Stamm abgeschnitten. Daraufhin hab ich mir erst mal die Pflanze angeschaut, ob sich irgendwo Schimmel gebildet hat. Gott sei Dank blieb sie davon befreit. Die Pflanze an sich wog etwa 320 g. Die kleineren Triebe wurden abgeschnitten, und die Buds daraufhin nass getrimmt. Die Blüten weisen einen Mix von Grau/Lila/Grün auf. Sehr schönes Erscheinungsbild! Die Buds bringen (inkl. Stängel) etwa 192 g auf die Waage. Der nasse Trim etwa 45 g (Tara von etwa 5g wurde hier abgezogen). Bin natürlich gespannt wie viel trocken auf die Waage kommt und vor allem wie sie am Ende schmeckt :D Die nächsten Wochen kommt dann ein smoke Review inkl. Trockengewicht! Vielen Dank fürs mitverfolgen und bis zum nächsten Mal! Gruß Wulle

Day 50 Flower (Day 92) Today is the first day of week eight of flower, and we're in overtime. According to the breeder, last week was supposed to be the final week of flower since this is a fast strain with Ruderalis in it, but the girls are still far from done. The right girl is still mostly clear, and the left girl has a bunch of fattening up to do before I'll even look at her trichomes. All I did today was to give the right girl 3 liters of pH 6.3 water. I did some bud photography as well, but I haven't processed those images yet. Day 51 Flower (Day 93) I'm starting to see a fade in some of the right girl leaves but nothing major yet. I gave her 3 liters of pH 6.1 water and called it a day. Tomorrow I have to hook up her drip irrigation system so I have a few days to tweak it before I'm off on vacation. Day 52 Flower (Day 94) Today, I finally got around to hooking up the drip irrigation system to the right girl. Setting it up was straightforward - put four drip emitters around the plant, run a hose from the emitters to a 120 l water barrel, connect the hose to a pump, set up how much water you want per day, done. For a long time, the right girl has been drinking 3 liters of water per day. One filling in my small 3-liter watering can. I figured, though, that I should first check if the can is 3 liters in the first place, so I filled it up and then measured how much water there was in it. It turns out that the can only contain 2.5 liters. Chinese quality... Anyway, no big deal when I've been hand-watering, but great to know now, as the system would have overwatered otherwise. I set up the system to irrigate 2.4 liters per day, slightly less than currently, but I think she will soon start to drink less as she matures and starts fading. In any case, I rather come home to a slightly thirsty plant than to one that has drowned. It's a bit clunky to use a timer-based drip system as it doesn't adapt to the plant. That's why I'm currently designing and building my own system, based on a Raspberry Pi, which irrigates based on moisture levels in the soil. The aim is to maintain the perfect soil moisture in each pot, no matter how much each girl drinks. This concept s precisely how a low-tech Blumat system work, and I even have one of those, but I can't use it for practical reasons, so I'm "stuck" at building my own hi-tech solution instead ;) The left girl in the small tent is just doing her thing, slowly fattening up. She is foxtailing hard, though, but I'm not surprised, considering all the stress she went through. No big deal, I'll turn those buds into a tincture instead. The flower that got burned a bit in my main tent is also foxtailing but way less. I also got delivered and installed a fire extinguisher ball in my small tent. Now each of the tents should be protected from accidental fire. I have to admit that the thought of leaving my tents up and running alone for a week makes me a wee bit nervous, so I'm taking the precautions I can. I never had any problems in the past, and I like to keep it that way. Day 53 Flower (Day 95) There isn't much to do this late in flower now when I don't even have to water anymore. Although, I am monitoring the soil moisture levels to ensure the irrigation systems work as they should. Today I also changed my Bluetooth Thermo/Hygrometers to WiFi versions since they allow me to remote monitor the tents when I'm off on vacation next week. They are currently showing the temps as high, but since I put them all the way up in the tent, it makes sense that it is hot up there. I will move them down to canopy level before I leave. I could also finalize our travel plans today after going back and forth, making plans, and changing them again for days. Next week, we're off to Iceland, where we will pick up a motorhome at the airport and then drive around as the wind and mood take us. We have been to Iceland before, but the place is so unique that we can't wait to return. It will be interesting (and a bit scary) to see how the girls will manage while I'm gone, but I believe that I've done enough to keep them safe and sound in my absence. A friend of mine can drop by our apartment and look at the girls should it be necessary, but I think they'll be alright. Day 54 Flower (Day 96) Last night, just before heading to bed, I checked the girls to ensure that the irrigation systems worked correctly. A good decision as there was a big puddle of water in the right girl's tent. Fuuuuuuu... So at 4 in the morning, I had to remove that water. Great. It turned out to be around 2.5 liters, and I guessed that the system wasn't working correctly by watering too much. Oh well, it was late, and I decided to deal with that the next day. When I opened the tent today, there was a new puddle even though I had turned off the system the night before. Huh??? I soon found the problem, though. Each drip emitter has a rubber membrane that keeps the emitter closed whenever the pump isn't running. That's in theory. In practice, however, the membrane doesn't close up properly, and water can flow through. I filled up my big 120-liter water barrel yesterday, which caused the water level to be above the level of the emitters. Considering the leaky emitters, we now had a water siphon system running, pulling water from the barrel and continuously dripping even though the pump wasn't running. Luckily I already had a low and squat 50-liter reservoir at hand, so I put the pump in that one instead, as it is lower than the emitters. That should solve that problem. I hope. (Yes, I know it is terrible with a white reservoir as it enables algae growth but it is all that I have right now and I'll throw a blanket over the reservoir before we leave.) However, from this experience, I decided to turn on the system for 24 hours, collect all water, and measure the exact amount. Honestly, I should have done that from the start already. Oh well, we live and learn. Anyway, I removed the system and taped it to the inside of a bucket, which collects the water, and tomorrow I'll measure it. Besides all this fun irrigation action, I didn't do anything else with the girls today. Day 55 Flower (Day 97) Things are looking better in the tent today. I left the irrigation system running for 24 hours, and there was no more siphoning happening after I switched to the lower water reservoir, so that's good. However, the system was still overwatering by half a liter. Not too bad on a daily basis, but as I'm gone for a week, I need it to perform better. I dialed it in by adding one more dripper but decreasing the frequency. I'm currently using five drip emitters, and they run for six minutes every 12 hours. I did three test runs (simulating a full 24 hours run cycle), and the average water volume is 2.43 liters per 24 hours. Spot on. Day 56 Flower (Day 98) The last day of the eighth week of flower, and everything is moving along nicely. A bit slow since the girls were supposed to be done already, but I'm in no real hurry. I'm off tomorrow for a week of vacation, and I hope I have taken all precautions to keep the girls safe and sound. They should be alright, but a friend will drop by in a few days to make sure. I haven't checked the trichomes in a few days, but that can wait until I return. All I did today was to check that the irrigation systems are running correctly. The cheap system for the small girl is a bit finicky to adjust, but the other system is running just fine now when I have the other water reservoir.

day 35 for the critical day 28 for the coockies the video in the dark, the first plant you see is one of my girl scout coockies, looks like big colas are forming up lol the other plant with the calmag issue is one of the critical, i got 4 plants in total 2 from each species the buds start to get bigger, ill stop the nutes for the critical and just give 1ml/l plagron green sensation, in other words ill cut the (N) out and just feed em water with bloom booster when they dry see you on week 6

Still no sign of flowering. Transplanted Novarine plant 2 into a 50-liters container. The spot is under a big shorea plant. Shorea is a South East Asian medicinal tree. This is minimum light spot in my yard. Hope she would flower. I choose plant 2 because I think plant 1 will stretch even further. Plant 1 was also moved to a shaded spot under an tree jasmin. This Millingtonia, Indian cork tree. I have sweet flowers all year round. People told me that dried tree jasmine flower mixed well with weed and is good for people with ashma and sinus. Kind of useless since why would asthmatic people even smoke? Plant 3 is my back up until I come up with a way to put her into flowers. Clone are doing nicely. And I am growing 3 clones from plant 1 and only one clone from plant 2. I’ll be donating the rest to friends with weight and blood sugar issues. By year end, I probable keep only one or two clones. One clone from bigger branch is growing just fine without any benefit form lighted grow box. Feeding plants with mid-level dose of cow manure tea and earth worm casting tea to keep leaves healthy. They should have been given a light dose of fertilizer. However, the flowering purslane are also eating and feeding soil microbes. Got my paws on triancontanol and brassinolide. Perhaps these will jolt Novarine THCV into flowering. Triacontanol won't dissolve in neither water nor alcohol. And it is emulsified with polysobate. Mixing of Triacontanol Triacontanol does not dissolve in polysorbate. It is rather emulsified. Means that it need to be melt and there need to be water added. My steps, 1) heated 70 grams of polysorbate in a big heat resistance glass cup. I used a beaker. Mix in 5 grams of triacontanol. And it does not melt. 2) Put in 100 cc of water and put in microwave. After the mix is boiled, triacontanol melt. There is foam. So a bigger cup and a spillage plate would prevent problem with my better half. 3) After heated, the mix is better. Then I added hot water from to make total 250 CC of solution. Then, the mix is clear. 4) Label the dose with pencil. This works better than labeling with ink. I use 5 cc at a time for my entire garden. 250 CC would last me 50 doses. No need to buy so much. This is cheap. Let’s see next week how effective they are.

So far so good with this watermelon zkittles from barneys 😁 no issues and responding well to the topping and lst, I am making 3 litres worth of food for the week and will up it as the plant needs it. I will post more pics and a video later of the room. The purple lemonade and runtz are doing well, they look lost in there big pots 🤣. Pics to come. The orange sherbert are on day 3 of there 2 week flush with molasses and phed water, hopefully there fill out, on the plus side there getting purple on them now 😀. Marshydro tsl2000 is doing a amazing job and is really nice and cool, my hps light use to cook the plants this led is perfect can achieve good temps even cold temps to pull the colour out at the end 😀. The ac infinity with digital controller is a must have and a real game changer for a grower, I love it my mate loves his and trust me it helps, easy to use and set it up outside your grow area, dangle the thermometer cable at canopy hight and your good to go. Day 29 day 2 flower, the watermelon zkittles is starting to start her stretch I think she is going to be a nice plant, iv had no issues in the last 4 weeks and never have with the barneys seed selection.

I’ve been flushing the plants for a week now. The colas have definitely gotten fatter from last week. It’s looking like I’ll be harvesting in 1 more week. Pretty much all the trichomes are milky and I’m starting to get amber ones.

Unfortunately, the Blue am and dynamighty (also due to their long flowering periods) didn't make it. Told my roommate to cut the plants when I saw that video and those pics but it was far to late already..

Hi guys, The plant is done stretching but am showing N deficiency in lower leaves. I don't know if its because of the light mover, the lower plant not getting light, or maybe its the genetics. But should I be concerned? I tried to add some blood meal in my weekly tea and an extra dose of macro nutrients just for this one plant, but still seeing deficiencies. Well this is why I like to grow these girls, they behave differently.

Grow Sponsored by MARSHYDRO HIGH EFFICIENCY WHITE LED LIGHT: Newest SMD LED technology provide highest PAR/LUMEN output(743umol@18"), designed to replace a single-ended 250watt HPS; MARS HYDRO TS 1000W Plants Growing lamp makes you get 30% higher yield compare OLD blurple led lights, Max 2.0g yield per wattage (power draw) LOW ENERGY CONSUMPTION GROW LIGHTING : Consuming only 150W with 342 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 2.5x2.5ft,Max coverage 3x3ft. Over 90% light energy can be absorbed by plants; higher intensity and more even coverage in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS1000 SUNLIKE FULL SPECTRUM LED INDOOR GROWING: 660-665nm Red IR/3200-4200Knm/5200-6800Knm, infinite close to natural light, best for all plants all stages growing, rapid plant response from seed to flower and increase yield & crop quality‎ HIGH REFLECTIVE & NOISE FREE-Fanless LED GROW SYSTEM design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom Get your own at https://www.amazon.de/dp/B07ZVFBR34