Likes
3
Share
Día 59. Los esquejes van alcanzando a la madre, salvo uno de ellos. De todos modos, ya en 5 a 7 días estoy pasando a floración. Se va a poner bastante dificil dado que tengo que atar bastante las plantas, y parece que va a ser nuy fuerte y difícil. Pero de todos modos esta experiencia me enseñó que tengo que resolver el corte de esquejes antes. Entre tanto, por el momento no arranco con una nueva madre, dado que serán 10 semanas de floración mínimo. Y no voy a poder mantener una madre tanto tiempo en el módulo bajo. Ya ahora queda esperar. Cambié el nutriente por feeding hybrids, agregué micorrizas otra vez, y dejé de darle feeding grow y el potenciador de crecimiento green jungle. Empiezo a pensar que podría ya ponerle el bud blood, pero probablemente no lo haga.
Likes
46
Share
So far so good, the plants have bounced wonderfully, all stretched out and now all that's left to do is keep the Res topped up and keep an eye for any issue that may arise. Thinking I may need some canes to help support a little further down the line. I changed my nutrient line up to buddhas tree since the shogun boost was ruining my Res and autopots. Quick check over this morning and all is well in the land of the Orange Jelly Sunset. Soooooo happy with this run, these plants are not getting touched ATM, at the most I may give another light prune if they bush up too much.
Likes
11
Share
@Paul_on
Follow
Well I had to harvest some buds from one plant of Blue Zushi as I got some bud rot I found some a wk ago and cut it away and an inch around it ,but it came back in one more cola I saved 50% of 3 colas I had to remove , I harvested the other Zushi too ,I ll show photos soon ,they are really frost after 30 hrs of darkness, I didn't want to risk any longer incase there was any mould from the bud rot still present in the plant/s ,well they smell really dank blueberry and cheese I smell so far ,with a fruity undertone. I will keep you updated on harvest and smoke
Likes
64
Share
I topped the 2 last plants and started LST on all of them without any problem. The growth was pretty impressive this week, especially for the Wedding Cheesecake which is clearly bigger then the others. I had to add some supports to compensate the height difference between the plants. I removed some leaflets here and there during the week to give some light to the lower branches without removing too much leaves. I increased the light power to 75%. I will probably give them another week and then switch to the 12h/12h schedule. Plants heights at the end of the week : ------------------------------------------- Gorilla Cookies : 29cm Purple Lemonade : 22.5cm Wedding Cheesecake : 37cm
Likes
156
Share
@StarLorr
Follow
Helloing 👋🏻friends and visitors. Welclone to my Clone diary🙃 Clones are doing very well, did more defoliation leaving a few fan leaves who were small that i eventually will be taking off and leaving fan leaves with sugar on them 😉 Feeding: Tue 21Nov: 3L each with nuts pH'd 6.3 Sat 25Nov: 2L each water only pH'd 6.3 -------------------------------------- That's it for this weekly update. Hope you enjoy your visit and thanks for stopping by, likes and comments are most welcome 👊🏻😉 Keep on growin! Keep on tokin!!! 😙💨💨💨💨💨
Likes
2
Share
This week has been pretty smooth sailing. Since all 4 of the testers are being watered at the same time splitting a gal of water ph to 6.1 with products listed. Started some LST on them this week and seems like all the babies are doing well. Tester 01/#1 by far grown the most at this point but time will only tell how they will all turn out. Enjoying this grow quite alot and am super excited to see how it goes.
Likes
78
Share
@Nebula420
Follow
I love how Blackberry grow, so vigorously and beautiful plant. Very easy strain, suitable for beginners, you just need to water and give fertilizer, its all u need. Plants look happy and healthy, all is well. Blackberry loves fertilizer so much xD=) always asks more))) Blackberry already flowering,now I can see amazing colors. The smell is weak. It’s hard to describe this amazing smell of berries, so sweet!😍 Thanks Fast Buds, nice genetics, and thank to everyone who follow my grow report, Peace!😘
Likes
63
Share
Removed so many leaves because the thrips ate em. Shes kicked into flowering and theres already trichromes on the buds, its the 5th of march so summer has ended and autumn has started in australia thank glob, will be spraying neem oil once more to make sure i killed all the thrips and mites then thats it straight watering as the soil is amended with dr greenthumbs, just might need to top dress a little.
Likes
41
Share
Venerdì 20 luglio Aggiungo 50 lt acqua e il doppio dei nutrienti, vediamo che succede. Ho dato anche una bella deformazione e pulizia rami inferiori Martedì 23 luglio Inizio controllo ec 3999 ph7 Cambio soluzione parto da 75 lt acqua osmosi inversa + 5lt acqua rubinetto ottenendo ec 473 ph 8.4 Aggiungo tutti I nutrienti ottenendo ec 1489 ph 6.5
Likes
42
Share
@DrLaggis
Follow
Day 64 - Beginning of the Final Flowering Week 🌱 Hello, my grow friends! We’re entering the last flowering week, and it looks like I’ll be harvesting the plant around Friday, which will be roughly Day 68. 💭 Harvest Decision: It’s a tough decision because while the buds are still growing, the trichomes in the middle and lower parts of the plant are already about 80% milky and 10% amber. I’ll keep an eye on things and plan to check the trichomes again on Day 65, two days before harvest, to make a final decision. 🌿 Trichome Considerations: I have a feeling that even after cutting the plant and hanging it upside down to dry, some nutrients might still move into the buds, potentially causing them to swell a bit more. This is something I’m curious to see. 💧 Humidity, Water, and Temperature: As I mentioned in my last update, I flushed the plant yesterday, just before the start of the final week, with 4 liters of water. This should help flush out any remaining nutrients, and I likely won’t need to water again before harvest since the pots are thoroughly soaked. The humidity and temperature are holding steady between 52-58% and 20-24°C, which I find ideal. I’ve got my exhaust system and fan running continuously to ensure no mold develops. 📸 Final Updates: I’ll check in again with an update just before harvest to let you know how things are looking. Remember, I’m posting new pictures and videos of my plant every day. 🌱 Day 70 - Last Day Before Harvest 🌱 Hey Grow-Friends! 😄 Today marks the final day before harvest, and I couldn’t be more excited! As planned, I’ve kept the plant in darkness for the last 48 hours and haven’t watered it for 6 days. My goal is to let it sit in the dark until this evening, when the time finally comes to chop it down. 🌿✂️ Drying Decisions 🌬️ After much research and considering several factors—especially the high humidity in my tent—I’ve decided to go with wet trimming instead of dry trimming. I know dry trimming is often recommended for better bud quality and taste, but my main concern is avoiding mold at all costs. So, to play it safe, I’ll wet trim the buds, get them into the right size, and then place them in a drying net for about 7 days. Timing Concerns ⏳ I’m still figuring out the best timing for transferring the buds into curing jars. Since I’m wet trimming, I won’t be able to rely on the classic “stem snap test” to check dryness. But we’ll figure that out as we go along! Final Reflections 🌟 It’s been an amazing journey, and although I could push the grow a little further, I believe this is the perfect time to harvest. Given my upcoming personal plans, it feels right to finish up now. I can’t wait to report back with the harvest update soon! 🌿 Stay tuned, and as always, thanks for following along!
Likes
15
Share
@Rangaku
Follow
Permanent Bluez putting a permanent strain on the carbon filter 😍😂chunking up nicely, smells sweet and sticky as . Gonna be a decent sized yield in a few weeks no doubt . She hasn’t missed a beat growing, smooth grow that’s gonna deliver. Not long now till I get to smoke it all
Likes
4
Share
I stopped feeding last Friday, and they’ll be on plain water until harvest. I’m not convinced by the lack of proper experimental evidence behind flushing, but I wanted to try it myself since so many people report a difference. I’m planning to harvest in about 7–10 days, aiming for a less sedative effect, while still preserving terpene production.
Likes
7
Share
Oggi ho tagliato la pianta e lo messa a seccare in box a seccare purtroppo ho dovuto toglierla un po prima per motivi di vicinato ma non male Da umida ha fatto 21 grammi mi aspetto 7g come conclusione
Likes
7
Share
Had to highjack this old diary sick hope this all goes well done this 3 times now lol with a degree of success lol well I would like to thank greenhouse seed co and Andy for the chance of growing these new genetics and there very own feeding line more pics due ignore next 5 weeks until I'm there lol
Likes
2
Share
@Abreuvoir
Follow
28 august 2022 RECAP: **photoperiod northen light** ** started from a seed, then made 4 clones in single pot, then removed 3 plants for outside** ** seed: 22-march-22, clones on 15-may-22, flower 20-july-22** UPDATE: Some buds have started to show sign of brown pistils Main nodes are very close from the 240w led (8''/20cm) but no sign of burns Starting to think I will have a decent harvest considering it's my fist grow
Likes
148
Share
@BioBuds
Follow
Greetings my dear Jungletamers, So a major surprise came when @MarsHydroLED contacted us and asked if would like to try out their new SP 3000 light. Being a fan of Mars Hydro for years, we of course accepted their offer. We are totally in love with this light. I was when I saw it in another grower's setup and was in awe of its output and results. So with much pride and thankfulness for the presents the Universe bestowed on us, in the form of MarsHydroLEDS offer and the bountiful harvest of the last grow, (which I am thoroughly enjoying btw, such a great weed to have grown ourselves) we start out on a new adventure that we can't wait to share with you. With many lessons learned from the previous grow, a mighty producing strain in the form of Expert Seeds Gorilla Glue #4, a.k.a Expert Gorilla's and a tweaked super soil mixture, we are setting out to hopefully get over a gram per watt, preferably 1.5. The Setup A 4.5 (140 cm) x 2(70) x 6.2 (200) grow tent, giving me a .98 m2 workspace. This space is customized to my needs. A standing fan will provide airflow through the whole grow, a top fan will help guide cooler air past my lights onto the grow. 3 56 ltr pots will be the home for the plants when they are 2 weeks old, up to then in smaller jars. The Light The leading role and star of the show will be played by the Mars Hydro SP-3000, so kindly provided by MarsHydroLED, which we will test and review here and I might say, endorse. I'm very careful with who I endorse and support these days, but a company with that many wins in design, I'm talking ever since their first range came out in 2009 these guys have been raising the bar for the whole industry, I did not hesitate to support this leading brand. If you want to compete with these guys, you better bring some quality AND affordable pricing. Why do I endorse the SP-3000 without ANY hesitation? It is seriously THE BEST light on the market in this price range and size group. It has an enormously effective output in U/Mol and with 30% less energy waste comparing to older LED lights. Prove me wrong! And with a company holding a considerable market share selling thousands of units every month, competing on price and quality, one would think that customer service would suffer. Of course, also Mars Hydro is not perfect, but check the sheer amount of people that not only praise the light but also the service received, should the light somehow not perform up to par. It is this dedication to their customer base that made this company have a fanbase... Yes, a fanbase with a website and a wiki. So if you are looking to buy new lights, check out the END OF SUMMER OFFER at the Mars-Hydro Global Store on Aliexpress: https://marshydroled.aliexpress.com/ 👈 Check their offers but also their score, they ship from a warehouse near you so you don't have the extra import fees!! Cut out the middleman and have a deal on these lights!! At the moment I write this in August 2021, the lights are 408,20 euro when sent from Germany to the rest of Europe, that's 40 euro cheaper than the other Mars outlets, BUT EVEN 60 euros cheaper than ordering at a grow store!! The Strain: Experts Seeds - Expert Gorilla feminized regular. Don’t let the name fool you because Expert Gorilla is suitable for growers of any skill level. However, you do need to be an experienced smoker because Expert Gorilla is one of the most potent strains on the market. Lineage: Chem Sis x Chocolate Diesel x Sour Dubb Popularity: Extremely Popular Flavor/Aroma Profile: Chocolate, Earthy, Fuel Yield: 400 g/m2 Stress Tolerance: High resistance to disease Potency: 24% THC Flowering time: 58 - 63 days The Soil: Those who saw my Monstercropped Gelato #33 grow (you should see it if you didn't, I'm so proud of that grow), know about my super soil and organic nutrients/ permaculture tea combo that starred in my previous diary. Because of the great results, we are going to use the same recipe, adjusted some more with some new ingredients that will complete the mix and give an even more sustained super soil buffer. 20% Atami Bi-grow (very similar to ocean forest) 20% Atami worm castings 20% Atami Coco Coir 10% Hydrocorn 10% Peat powder 1 cup Fossil seaweed chalk 1 cup bonemeal 1 cup bloodmeal 1 cup Microlife 3-4 teaspoons of epsom salt 3 cups of activated biochar (activated with our own permaculture tea) I just made layers, starting with hydro corn on the bottom to aid airflow/run-off. On this I started layering the coco coir, Bi-grow, peat, castings, and amendments in a way that the more mature the plants get, the more phosphorous and less nitrogen they will find. Every time I made three layers, I would mix them by hand. This way we simulate natural soil, which consists of humic layers, composting plant waste, fungal and microbial life, and nutrients from fossilized sources. The Nutrients I will start with just adding 6.4 PH water, although this soil should buffer ph itself and regulate, after 4 weeks, I'll slowly be adding: - Biobizz Grow - Plagron Alga Grow - Biobizz CalMag - Biobizz Flower - Plagron Alga Flower - Biobizz Topmax - Melasses The Tea Some of you might remember the permaculture tea from my previous grow, I have a short video in my harvest page showing how we make it), it will star again in this grow. - (Rain)water - Comfrey (whole plants) - Dandelion leaves - Roots and leaves from the earlier grow - Minor periwinkle (Finca minor) is a plant we have in our garden, it contains an alkaloid that is associated with increased brain function but also is a light toxin for wee beasties and other unwanted guests like gnats (who hate it). - When flowering I add some wood ash to this mix Thank you for checking in on one of my grows again! Thanks for all the love on my previous grow, check it out if you haven't seen it!! Hug Bud
Likes
5
Share
@Elpicor
Follow
Ho montato una growbox 100×100×200 cm per consentire una migliore areazione e crescita, le piante sentono lo spazio disponibile attorno a sé, quindi questo era il momento giusto, ora si viaggia con una mars hydro fc3000 con dimmer al 45 % a 50 cm, un ottimale 350 ppfd , ppfd aumenteranno a 550 gradualmente in 15/20 giorni, aggiunto il supplento di spettro blu di marshydro, non sembra male per ora stann benissimo😇
Likes
7
Share
Привет друзья. Наше знакомство продолжается с новым фотоцветущим растением от Smail_Seeds сорт ORIGINAL CHEMZKITTLEZ F1 reg. Сегодня растению 99 дней. Шишки наливаются уже тяжелей и тяжелей стоять малышки) Перевёл на 12/12 1.10.2023 Растение очень хорошо развивается, ни каких сбоев в генетике не наблюдается😀 Сорт выводим сами. Смотри мой профиль, у нас всегда есть что то интересное. Не забудь поставить лайк❤️, если понравилась как прошла неделя И читайте наш TELEGRAM: https://t.me/smail_seeds #Smail_Seeds 😀