Likes
3
Share
Phenohunting iniziato 1/1 &. 15/1 In foto 10gg dallo switch 25fem rimanenti da 50semi.... Da Ora si inizia la selezione aromatica pianta x pianta
Processing
Likes
3
Share
Likes
6
Share
@CalGonJim
Follow
1/12/26 4:18AM MONDAY.....💪💪💪💪👌 1/12 CANNAKAN DAY MEDICINAL SLAVERY WOULD MAKE HARVEST A BREEZE!! ABOUT THE LEDS Yes, the **Samsung LM301H EVO diodes** in your Mars Hydro lights (likely an FC-E series like FC-E3000, FC-E4000, or similar) are among the most efficient horticultural LEDs available right now—individual diodes hit **3.14 μmol/J** efficacy, pushing the whole fixture to around **2.85–2.9 μmol/J** PPE (photosynthetic photon efficacy) in manufacturer specs and independent tests. That's top-tier for full-spectrum grow lights, meaning they convert more electrical power into usable plant photons than older diodes or cheaper LEDs. If they "seem more efficient than the PPFD meter says" (your plants thriving at lower wattage/height adjustments), that's actually common and not a contradiction—it's often the **real-world efficiency** shining through once nutes/stress are fixed. Here's why this happens and what your recent wattage drop (a few more watts lower) likely means: ### Why Samsung LM301H EVO Can "Seem" More Efficient Than Raw PPFD Readings Suggest - **High PPE + Uniform Distribution**: These diodes excel at producing photons in the PAR range (400–700nm) with minimal waste (heat/loss). Mars Hydro FC-EVOs achieve strong average PPFD (e.g., 750–1000+ μmol/m²/s in tests at recommended heights/power) with even spread—no hot spots wasting energy. When your nutes were suboptimal (Advanced Nutrients issues), plants couldn't fully use the light (wasted photons → stress, stretch, lower efficiency). Now dialed in (GH powder + aminos + mycos), they convert more of that PPFD into growth—making the light "feel" stronger/more efficient even if meter numbers stay the same or drop slightly. - **Meter Limitations & Calibration**: - Handheld PAR meters (especially cheap/older ones) can under-read full-spectrum LEDs like LM301H EVO (strong white + red enhancement). They often have poor spectral response to the exact mix, reading 10–30% low compared to pro tools (Apogee SQ-500) or calibrated apps. - If you're using an app like Photone (mentioned in your diary), it's generally more accurate for Samsung full-spectrum lights (especially on iPhone; Android varies but often close with diffuser/paper). Many growers report Photone matching or exceeding cheap handhelds on LM301H setups—sometimes showing higher effective PPFD than a basic meter implies. - Bottom line: Your plants are the ultimate meter. Thriving (miraculous growth, no burn/stress) at lower wattage means the effective usable PPFD is higher than a potentially under-reading meter suggests—efficiency win. ### Your Wattage Drop & What It Means Lowering by a few more watts (on top of the earlier ~10% drop) is smart and aligns with the efficiency gains: - Dimming on Mars Hydro FC series is **very linear**—tests show PPFD percentage tracks close to (or slightly above) the dimmer % because diodes run more efficiently at lower currents (less heat/loss). - Example: Dropping from 100% to 90% might only reduce PPFD by ~8–10%, not full 10%, due to that efficiency curve. - Your plants handling it (still "miraculously better") without stretch or pale leaves confirms the sweet spot: likely 450–650 μmol/m²/s veg/late veg range now, with room to push if pistils emerge. - Solar bonus: Every watt saved = less battery drain on cloudy days, cooler tent (less fan/AC draw), and more headroom for extra plants without spiking consumption. **Practical next steps**: - Recheck PPFD (if using Photone/handheld): Average multiple canopy spots at current height/power—aim 450–600 for late veg autos, 600–800 early flower. - Watch response: If nodes stay tight/dark green/no cupping, you can drop another 5% or lower height slightly for denser canopy. - Log kWh if your inverter shows it—track the drop to celebrate the savings. - If meter still "under-says" vs. plant performance, trust the plants more—Samsung EVOs are proven beasts when the rest of the grow is dialed. This is textbook optimization: nute fix → better photon use → lower power for same/better results → solar efficiency skyrockets. You're building a truly lean system. How low are you at now (e.g., 70–75W total?)? Any pistils or new growth explosions today? Keep the momentum—it's paying off big. 🥊🍌👨‍🔬🚨🌞💪💪💪💪💪 1/15/26 12:36AM L-Phenylalanine: https://pubchem.ncbi.nlm.nih.gov/compound/L-Phenylalanine#section=Crystal-Structures That’s your Mars Hydro bar-style LED grow light setup in a compact grow tent (looks like a 2x2 or similar Spider Farmer tent branding on the mylar walls), running super efficiently right now! Breaking down what I see from the photos: • The light is a multi-bar LED fixture (probably from Mars Hydro’s FC series, like FC3000, FC4000, or a smaller EVO variant) with Samsung LM301H (or similar LM301B/H EVO) diodes—these are high-end, efficient chips known for uniform distribution, low heat, and great full-spectrum output (warm white + red/IR boosts for veg/flower). • It’s hung at 19 inches (measured from the light bars to the canopy or sensor plane, with that white dotted line marker). The tent shows a hygrometer/thermometer combo reading 76°F / 53% RH (nice stable veg conditions—cooler side helps prevent stretch). • Your PAR meter app is showing 327 μmol/m²/s PPFD (Photosynthetic Photon Flux Density) at that spot/height—solid reading for where you’re at. • Plants look like young cannabis in veg stage: multiple small pots (fabric or repurposed buckets like Krøger cottage cheese tubs—classic budget move!), healthy green canopy with some colorful accents (maybe early purpling or strain traits), topped or in early training, sitting in coco coir or similar media. • Power draw: ~50W current (from the energy usage screenshot), averaging super low over time (0.48–0.76 kWh daily average). That’s impressively efficient—likely dimmed way down or a lower-wattage model (e.g., 150–300W rated, but running at partial power). Total consumption over 30 days at ~14.5 kWh is pennies on the electric bill. This aligns perfectly with your earlier plan to target ~500 PPFD but getting great results at lower wattage/intensity. Right now at 19” and 327 PPFD: • That’s in the sweet spot for early-mid vegetative stage cannabis (typical recs: 300–600 μmol/m²/s for veg, starting lower ~300–400 for young plants to avoid stress, ramping up as they bush out). • Bar-style lights like this excel at even spread (no hot center like older quantum boards), so your canopy is getting consistent light without bleaching or stretch in spots. • Low power (49.6W) means minimal heat buildup—fans and passive cooling handle it easily, keeping temps/RH dialed (76°F/53% is golden for veg; prevents mold and encourages compact growth). Why it feels “great results at lower than recommended”: • Samsung diodes are top-tier efficient (often 2.8–3.1 μmol/J), so you hit usable PPFD without cranking full power. • Many Mars Hydro FC models recommend 18–24” for veg at 50–75% dim (your 19” fits right in). • Your plants are responding well—lush, no obvious deficiencies/stress, and you’re feeling physically ready to top/fill pots after the delay. To push toward your 500 PPFD goal without overdoing it: • Lower the light a few inches (try 16–18”) incrementally—PPFD scales roughly with the inverse square law, so dropping height boosts intensity noticeably (could jump 20–50% depending on spread). • Or bump dimmer % if it’s not maxed (your 50W draw suggests plenty of headroom). • Retest PPFD at multiple canopy spots for average (center often higher, edges lower in bars). • Watch for tacoing/upward leaf curl (too much light) or stretch (too little). This setup is dialed for low-energy, healthy veg growth—perfect for your “lower wattage wins” approach. Plants are happy, tent’s stable, and you’re crushing it efficiency-wise. If you drop the height or dim up, snap another meter reading/pic—I can help fine-tune further. How old are these ladies (weeks from seed/clone)? Any specific strain notes, or planning to flip to flower soon? Keep the momentum—today’s a win! 🌱💪😂 1/18 11:58AM. BRAM STOKERS TRAILER PARK DRACULA........I SHOULD BE WORKING ON THE PLANTS BUT THIS IS REALLY GOOD. MINA AND HER DAD ARE RUNNING PROPETY SCAMS, SHE CONVINSES THESE LOSERS THEY HAVE MAGIC DRACULA POWERSS....AND WE STEAL THEIR TRAILLER. REINFEILD RANDY , JULIANFIGURES IT OUT AND BLACKMAILS BOTH OF THEM. AND MUSICAL GUEST KISS!! A GREAT HALLOWEEN EPISONDE.... OH I FORGOT I AM SUPOSSSED TO BE GRWOING PIT.
Likes
2
Share
Likes
4
Share
seventh week flower, the blueberry is going off! wow, my buddy's lemon kush smells like a sprite lol, and we noticed that the ChemDog is reveging... 13h light was not so good
Likes
1
Share
@kdifiori_
Follow
And here we are at week seven. This girl keeps growing despite all kinds of problems. Midweek, my Mars Hydro Ts1000 broke, so I quickly replaced it with an old lamp I had, waiting for a new transformer to be delivered. The smell is truly incredible. This week she drank 2 liters of water with nutrients and I added some Overdrive. See you next week!
Likes
11
Share
Likes
18
Share
this week was great, the V1 arrived through a lot of logistical nightmares. its the final test before mass production- i will post another dairy for it but please have a look at the pics above. ive created a stylish subtle, modern way to grow 4 plants. this will be great for all levels and will save big on energy and nutrition. you just have to prune, it can even draw water into itself. anbd its 4 plants!!! stick here and youll see it in action. ive decided to change the order in tents. now we have super strong Purple berry Kush with the returned and super strong sweet seeds Sweet cherry pie. so one tent is the strong, and the other tent is now perma auto flower, which serves for additional veg for girls who fall behind their grow peers. hope that makes sense. i think my net is pretty useless other than a visual to plan nodes. i guess the real support will come from placing more plastic rods around the colas and fastening them. hope Christmas was kind to everyone. this oncoming week will be the last week of veg i think for tent two and we flip to flower. thanks for looking.
Likes
4
Share
@gr3g4l
Follow
One week of topping. After 19 days, they grew enough to safely cut the apical buds, and I also removed the first node from each plant, leaving only three nodes. A total of 6 branches per plant, which I will let continue growing. Later, before switching them to flowering, I will perform LST. The plant structure clearly shows its indica dominance, with broad leaves, short turnudal distance, and a good thickness of the main stem. Una semana de poda de apicales. Con 19 dias crecieron lo suficiente como para poder cortar los apicales sin correr ningún peligro y también me deshice del primer nudo de cada planta dejando solamente tres nudos en cada una de ellas. Total 6 ramas por planta que dejaré que sigan creciendo y más adelante, antes de pasarlas a floracion, les haré un LST . La estructura de la planta muestra claramente su predominancia índica, hojas anchas , distancia inturnudal corta y un buen grosor del tallo principal.
Likes
8
Share
Sorry for not updating you guys, i had some private stuff going on but i am way better off now :D
Likes
25
Share
Finaler Grow-Report – Lemon Cherry Gelato Mein erster legaler Grow mit Lemon Cherry Gelato von Barney’s Farm ist fast abgeschlossen – das Curing läuft noch, aber es ist Zeit für ein Fazit zum Anbau! Setup & Bedingungen: Ich habe in einer Spider Farmer 90x90x180 cm Growbox unter der Spider Farmer SF-G3000 (300W LED) angebaut. Als Medium kam BioBizz Light-Mix zum Einsatz, gedüngt wurde mineralisch mit Advanced Nutrients (Grow, Bloom, Micro). Um das volle Potenzial der Pflanzen auszuschöpfen, setzte ich auf Low-Stress-Training (LST) und ein ScrOG-Netz zur optimalen Lichtverteilung. Keimung & Wachstum: Die Keimung verlief problemlos – 4 von 5 Samen sind innerhalb von zwei Tagen aufgegangen. Während der Vegetationsphase entwickelten sich die Pflanzen kräftig und reagierten gut auf das Training. Die ScrOG-Methode half, ein gleichmäßiges Wachstum und eine bessere Lichtnutzung zu erzielen. Blüte & Ernte: Nach etwa 6 Wochen Vegetation leitete ich die Blütephase ein. Die Pflanzen zeigten eine starke Harzproduktion und eine beeindruckende Farbgebung mit einer Mischung aus dunklen Grüntönen, lila Highlights und frostigen Trichomen. Das Aroma war von Anfang an fruchtig und zitronig, mit phänotypischen Unterschieden in der Intensität. Die Ernte fiel mit 300-350 g trockenen Blüten sehr zufriedenstellend aus – für meinen ersten legalen Grow ein starkes Ergebnis. Curing (still in run ): Aktuell lagern die Blüten in 24 Mason Jars (16oz) und einem 2L-CVault, um das Aroma weiter zu entwickeln. Derzeit dominiert eine zitronige Note, während die erhofften Kirsch-Terpene langsam stärker hervortreten. Mein Ziel ist es, die Haze-Noten möglichst gering zu halten und das volle fruchtige Profil herauszuarbeiten – der Prozess ist also noch nicht abgeschlossen. Fazit: Ich bin sehr zufrieden mit dem Grow – die Kombination aus hochwertiger Genetik, gutem Training und präziser Nährstoffversorgung hat sich definitiv ausgezahlt. Die Buds sind harzig, aromatisch und vielversprechend, und ich bin gespannt, wie sich das Curing weiterentwickelt. Der nächste Schritt ist, das perfekte Terpenprofil zu treffen – und das Curing geduldig zu optimieren.
Likes
1
Share
She is growing amazingly and now stretching in the first week of flower. This one is gonna be big as AN Auto flowers, I love them like this. If I had more space I would scrog her or do some more LST to promote the lower brwnches, but this is not my goal in this grow. Next week I'm gonna do some heavy defoliation.
Likes
1
Share
Absolutely blown away by the new 2025 setup, prev ran 3 tents 😂, switched to AC Ifinity 2,4 x 1,2 single tent, 3 x 150 or 6“ fans. Fans all port outside, 2 exhaust with yet uncoupled carbon filters, 1 inlet with pollen filter. 6-7 air push fans (not all yet on 😂). SpiderFarmer 16L humidifier, inkbird RH control, inkbird heat control, heater, trotek dehumidifier (12L) with drain line and reservoir. Blumat system with RO fed 20L water butt, each pot with 3 long ceramic blumats. Data logger from SensorPush including WiFi hub and 4 sensors. One in cellar room (lung room), one above each plant canopy. Setup logger n sensors and track VPD. System running itself
Likes
19
Share
Thanks for checking out my grow growmie leave a like and or comment and I’ll be sure to check yours out!! 🌱 This week is lookin good as flower comes almost o a close 1 week maybe 2 weeks left max but the gorilla glue (middle row) is getting pretty close overall lookin great huge comeback from how they looked in pre flower
Likes
16
Share
@Dunk_Junk
Follow
She's looking as pretty as anything this week!! I think she's almost there. Just waiting on more pistils to change colour. Trichomes are mostly milky. I note she is quite smelly!!!!!!