FW5.

Work in progress however I finally was able to get the girls into the drip system. They have recovered nicely from the light burn but unfortunately I lost one of the girls. Now I am working with 4 and so far happy with the results. I am waiting on a better light, I ordered a 720 watt bar style light from Alibaba which will arrive in just a few weeks hopefully before flower. Still need to get the room in order so more to come on improvements. Switched to Gen Hydro Maxi Series just for the simplicity. We will see how this goes.

Still got some slight burning of leaf tips more so on the right side of the tent. Otherwise, growth is good. Stratiolaelaps scimitus are now abundant in the soil. Pretty neat. GIBBERELLIN: Note: As gibberellic acid is not soluble in water you need to dissolve in alcohol first, Mixed 0.75g Gibberellic Acid 90% with 50ml of 99% Isoprponal alcohol , (Any alcohol will do but a higher % works better) also warmer alcohol helps dissolve the gibberellin. Mixed with 1000ml =1L of distilled water, bringing the concoction to 400ppm. 2000ml = 200ppm etc Every plant has a different threshold required to elicit a response, 400ppm is on the high end of the scale I've read to be careful with dosage as it's easy to over-apply, let's find out if it does anything like it described. Added bunch of enzymes, aminos, 5 or so different kelp. Can be kept for 1 week in the refrigerator. Nutrients for the week are recipe foliar application. The speaker (containing a 3 KHz signal and nature sounds) is played at high volume with high treble and medium bass for 10 minutes before spraying the plants. The plants are then sprayed while it's playing and the sound is continued for another 20 minutes after spraying. Both sides of the leaves should be saturated. Treatment is best performed early in the morning/daylight, preferably in foggy 65+RH% dew. On cold mornings, spraying should be delayed until late afternoon if outdoors. Do not spray plants when the temperature falls below 50o F. The formula also can be administered in the regular weather supply, by drip-feeding, hydroponics, etc.. The nutrient solution should be applied once somewhere in first 4 weeks, then twice weekly thereafter. https://biologydictionary.net/gibberellin/ Once a plant has sprouted past the surface of the soil, the endosperm is long gone. The plant must now rely on photosynthesis for food. However, the role of gibberellin does not stop at the seed. Gibberellin is responsible for many aspects of plant development. Further, plants produce many forms of gibberellin molecules, which act on different parts of the plant. In the image below, you can see the effects of a specific gibberellin applied to a plant. In number 1, no gibberellin was applied. Plants 2 and 3 both had gibberellins applied, with plant 3 receiving the highest dose. Gibberellin here encourages the plants to increase their internode length or the length between their leaves. In many plants, the regulation of gibberellin is an important natural process that regulates their height due to this process. At the cellular level, gibberellin is influencing the balance of proteins. In doing so, it encourages cell growth and elongation in the stems and between nodes. In some species of plants, gibberellin is involved in many more processes. These include flowering, fruiting, and senescence, or the natural death of leaves and other plant parts. Interestingly, many genes that regulate and adjust gibberellin levels are influenced by the temperature. Thus, when the temperature changes during seasonal change, the plants react to this as gibberellin levels change. This starts off many processes such as flowering and fruiting. Gibberellin molecules are involved with and interact with other plant hormones. The auxin level, for example, is directly related to the gibberellin level, and the two complement each other. Ethylene, on the other hand, tends to degrade gibberellin levels. Plants use these hormones, which respond to different inputs, to balance and react to inputs from the environment. These inputs signal various environmental conditions, which the plant is keen to take advantage of. Gibberellin Structure Gibberellin molecules of different types are synthesized in many different parts of the plant. Currently, there are over 100 uniquely identifiable gibberellin molecules. These molecules are synthesized in many cells of the plant, but tend to be concentrated in the roots. This is different from auxin, which tends to concentrate at the apex. Gibberellin is a diterpenoid, which is a familiar and highly represented molecule in biochemistry. It forms the basis of molecules like Vitamin A and Vitamin E. Seen below is Gibberellin A1, which was the first identified gibberellin. Other gibberellins have the same basic structure, but have various side groups attached. These groups affect where and how the gibberellin acts, which is how gibberellin can have so many diverse and unique functions in different tissues

Well tying down is no longer an option, now the fight is to get them to stand up!! #shittyproblems No let up on white hairs yet!! It makes me sad and happy at the same time lol

Plants really looking how I like, nice leaf colour, healthy and vigorous. With another two weeks of stretch left these are going to be some very big girls.

Small as it is will scale after drying gp is simply good, mb i overheat the tent not for 1-2-3 daya it was +40 celsius for preflower and around 40-45 in a peak so its rly hard to sustain this heat ofc silica helps alot but anyways gp can survive that + deliver not bad(foxtail) quality buds xd 2-3 stems got foxtail, main also but still its ok for me tho i fucked up veg thats a fact ao it might be bigger 2 times might not for 3-4 days i fixed veg cal deff but it might be the signal to start pre and thats what we got

So she got the chop 2 weeks prior to what I wanted, but I did not lollipop enough doing this Scrog and suffered high humidity, lack of airflow and as a result lost 4 tops... Out of 16 big ones. But I have harvest, wet trimmed and left to hang dry in a room on clothes drier. Room circulation fan on low, and temp is 22c with 51% humidity. Aiming for a 10day dry it maybe sooner. Then we will smoke test and cure then re test 🙌💚 Thank you all for following along this LONG and heartbreaking breaking Journey

This week I let the plant grow freely with no training or cuts applied. I’m waiting for the branches to reach 5 nodes before doing the next topping at the 3rd node, so for now the focus is just on healthy growth and recovery. Everything is developing nicely, and the structure is getting ready for the next apical cut 💪🌿

Hello Grow friends.👋👋 ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ The little one is now in the flowering phase. She is developing into a pretty little bush. I'm curious to see how much more height it will gain. ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ 💚💚

She hasn't grown up, but she's filling out quite nicely. Looked at others growing Criteria Kush (CK photos) and noticed the growth of plant just before they put into flower. My husband decided thats what we are doing. He put up a trellis and we will use this to help during flowering. She seems happy and content. I hope she stretches and flowers nicely. Its flower time baby. 🌺⏳

Blue dream is fading yellow she wants to finish even tho buds still with plenty white pistils and I think they can get bigger hopefully she’s able to stay strong one more week .. purple lemonade just starting to fill the buds I believe she has a couple weeks left

Here we are day 55 for our Wurlz F1 Hybrid. I would immediately like to say, do you notice anything by any chance? I said day 55 and we're pretty much ready. The leaves are turning yellow regularly, I have removed the fertilizers, the pistils are ripe, the resin is out, there are all the signs for a harvest which should take place towards the end of next week. The plants were born on April 6th, I repeat on April 6th for those who cannot grasp the concept. Most certainly Watermelon Candy and Wurlz will be harvested around June 6th, guys...8 weeks...not even 9 or at most nine weeks. If you're good at math, you do it otherwise I'll lend you some fingers. For topping lovers it means that if you want to do topping on autoflowering plants they won't finish in biblical times, according to my calculations even doing topping shouldn't go beyond three months, like an autoflowering from the previous generation. Why am I talking about the previous generation? Because these have certainly moved forward with speed, I have seen them grow and above all swell the flowers like I have never seen them do. As for the rest of the resin and pistils, everything is really in place. I want to do a terpene inspection soon and evaluate the ripeness for the harvest. The Wurlz also ends a little earlier than the others and is truly lightning. Strong, fast as the wind, stable as promised by Zammi. https://www.zamnesia.io/it/10669-zamnesia-seeds-wurlz-f1-automatic.html Feeding is by Plagron with the Power Buds - Sugar Royal - Green Sensation + Alga Bloom combo that drives me crazy https://plagron.com The lights are from Viparspectra p2000 and provide super light www.viparspectra.com/ Tent & Air www.secretjardin.com Music of the week www.radionula.com +++ 432 hz frequencies to keep in line my Girls to Gaia. Site Description ZAMNESIA SEEDS - WURLZ F1 HYBRID AUTOMATIC: EFFECTS TO LEAVE YOUR HEAD IN A WHIRL! As the end product of combining Runtz with Watermelon Candy, Wurlz F1 hybrid Automatic showcases a reliable, uniform, and, above all, easy growing experience. The resulting buds offer mind-blowing flavors and soothing effects, making Wurlz F1 Automatic more than worthy of being on your radar. GROWING WURLZ F1 HYBRID AUTOMATIC As an autoflowering strain, it takes just 9–10 weeks for Wurlz F1 Automatic to move from germination to harvest. Fortunately, there's very little required other than a bit of maintenance along the way. This is partly due to the F1 genetics that make this strain robust and uniform, resulting in plants that reach a similar height and provide a similar (large) yield. Moreover, Wurlz F1 Automatic is highly resistant to disease, pests, and other ailments. Reaching heights of about 65–80cm, Wurlz F1 Automatic is not an overbearing plant and can fit into smaller spaces with zero fuss. Once ready to yield, growers have the potential to see a return in the region of 450–500g/m² indoors and 50–150g/plant outdoors. AROMAS, FLAVORS, AND EFFECTS OF WURLZ F1 HYBRID AUTOMATIC After Wurlz F1 Hybrid Automatic wows you with its easygoing growing experience, the best is yet to come: the smoke test. Teeming with terpenes, this cultivar offers a fruity and candy-like flavor tinged with just a little bit of pine for good measure. In terms of effects, Wurlz F1 Automatic is bolstered by 24% THC and a finely tuned array of cannabinoids, making for a soothing, physically relaxing, and, in larger amounts, couch-locking high. So settle in with some of your favorite friends, snacks, and movies; this is relaxation at its finest. www.zamnesia.io

Day 43 12/06/2021- Beginning of week five of flower. She should be done soon, she will also get her final feeding soon. Day 45 12/08/2021- She got her final top dress today from here on out she is on her own all I will do is water with pain water PH to 6.2-6.8 when dry. Day 47 12/10/2021- She is coming along nicely. Very frosty wish she wasn't a auto so I could of clone her for sure. Today she got a nice treat as it rain in my hometown and that's the water she got. Hoping she is ready by the end of the year. I know she looks funny but she was never topped either. Day 49 12/12/2021- End of the week, nothing new.

Essa planta vou tocar sem treinamento pois acho wireless o caule está frágil na base.

Flushed these out a little yesterday to prevent build up. Starting to swell up a little bit.

Ernte lief gut

I think I am worrying myself more than I need too. The calicum defficiency has took over around a half of the fan leaves on 1 of the plants. I don't have much hope in a great yield from this one but fingers crossed my other 2 were caught in time. Have folder fed with a slightly more concentrated spray of cal mag and ph'd water. Whilst keeping a feed, plain ,feed schedule Unfortunately I don't currently have access to a ppm reader so can't say for sure exactly what the problem is but It seems the defficiency has slowed/stopped. Will continue to monitor.

fast eddy measures 60 cm, the 3 gelato cookies between 70 and 80 cm, the 3 northern light from 90 cm to 1 meter 20, the smell is stronger when the tent is opened, major heat problem solved thanks to a portable air conditioning🍀

Welcome to my Sour Strawberry Diary sponsored by Spider-Farmer & Barneysfarm. Days 15-21 Veg Days 8-9 11-12 Pheno 1 & 2 few days apart. Decided to top again, and again and again. Making a nice few tops. Been such a heavy sativa im not use to growing one. Kinda in new Territory. So many Shoots so close together. I'm gonna have to top them again at some stage. There's just too many and they're too short. They're the tops of what would of been great colas. But, I've a different agenda here. And I need more colas to fill my net. 6 sets from each plant won't cut it. Growth is good and steady this week. (Sadly, same can't be said for her in RT, they're pushing through) updates will come soon. Strong like Sativa Structure. Missing a bit of a stretch at the moment. Think I might throw her into a few days of 12-12 and then flip her back into veg to stretch her nodes to 50cm2 net. The legs of the frame go into the pot. So its moveable. Let's hope I do a decent job. The one that was started in the root riot cube, with the Broken stem. She is the biggest, by a ways I wonder if that's from an early break (HST) in her stem. Will for sure be testing this with clones. Happy with how these past weeks went. This is where the good times end. (For now) mag issues are looming. Shout out to the Bella from Spider-Farmer & the Rep from Barneysfarm. Much appreciated for the products. Thanks to all who viewed, liked &/R commented. Look forward to seen your diaries. Either way thanks for dropping by.