Likes
Comments
Share
Everything's going good, just water till harvest now. Very Berry will be coming down between the 17-24 of march and the stone cold diesel will be coming down between the 23-30 everything in my house smells like this tent, that's with venting outdoors and running scrubbers. Hands down that stone cold diesel produced some funk , like almost gag funk, the berry is berry smelling of course with gas notes behind it.
Likes
9
Share
This was the final week. I had no choice to harvest early because pm was starting to settle on a lot of stuff in my garden. The UV light worked for like a day or two and it came back. It's just not worth it. It turned a lot of the buds hairs brown and the leaves did suffer a little damage. Part of that was the peroxide solution. I mixed a little too strong, and it didn't seem like it hurt the plants, but after a few days, they showed the damage. It just seem to burn the leaves a little not really the bud so that's good. There was three days of rain coming, so I wanted to get it cut down.I didn't intend on harvesting so early, and I have no place to dry this because other plants drying so I was forced into freezing it. I cut down branches and wet trimmed it into a bin and ran to the freezer every 10 minutes to get it frozen right away. I maybe could've dried it and had some decent flower but I figured this would be a good opportunity to learn about making bubble hash. I decided I wanted a stainless steel mixing vessel and found this beer brewer for a good price. I think it's gonna be solid. It has a nice drain at the bottom. Then I bought some 5 gallon buckets for spacers for my 5 gallon bubble bags I use the heat gun to peel the stickers off and to heat the bottoms up to make it a little easier to cut them out with the utility knife. I used the heat gun again to soften the edges a little bit so I don't damage my bags. I can't do my washes until I'm done trimming my flowers, but I got a 2 Inkbird temperature controllers to bring my studio down to bubble hash temperatures with my ac unit. I could wait a little longer until it gets colder but I'm not sure how cold it's really gonna get and I wanna get this done soon as I can. I'm gonna have to try it without a freeze dryer so that should be fun and I'm not going to micro plane it at all costs. I got 25 µm screens for drying that I will use a towel to wear most of the moisture out then see if it on to some parchment and I should be able to get my studio really cold and dry to get it dried relatively quickly. I'm seeing it recommended to be 30 to 40% humidity and 50° or so for about a week and it should be dry enough to press some rosin. I'm gonna try to separate out the full melt hash, but honestly I think I'm just gonna get a wide spectrum pool on this hash and just press it into rosin to make it easier to deal with. I kind of was trying to find the cheapest bags it's still decent and wasn't paying attention when I bought it really cause there's no 45 µm and my set and I'm saying that to be the lowest recommended the pool but also seeing a lot of people pulling some nice 25 µm so I think with my early harvest I might have some smaller truck head so I might not be a bad thing to have that bag as my lowest. I'm going to catch everything under 160 to 25.
Likes
23
Share
Absolutely a treat to grow this one from Seedsman! I enjoy the smoke as well as I enjoyed the grow. I learned a lot from breaking this lady's main top and how well they can recover.
Likes
13
Share
Had to raise my light quite a bit as the plant stretched so much this week. Roots have exploded. she’s hungry and drinks a lot
Likes
41
Share
All jarred up. This stuff is amazing tasting. Super smooth and tastes like real strawberry. 10 out of 10 fastbuds nailed this one.
Likes
20
Share
Que pasa familia, traigo la 2 semana de esta farm cheese, la verdad que se está comportando muy bien y el alimento aportado de advanced nutrients como siempre lo agradecen. Ph controlado, temperatura y humedad dentro de los parámetros, ya quitamos el propagador y ya es esperar hasta que cojan altura para pasarla a floración. web: http://bit.ly/2uJAjgy ts600: http://bit.ly/3cnv0Ev code: an420 Nos vemos la semana que viene fumetillas
Likes
38
Share
@GMSgrows
Follow
The AK2.0 is rockin. She is flowering the strongest. She is near the light, because she is so tall., but it doesn't seem to affect her at all. Very good strain to grow no issues at all, just having some fun watching her bulk up quickly.
Likes
14
Share
Venga familia que ya viene la cosecha de estas Punch Pie de RoyalQueenSeeds , que ganas que tenia ya de darles machetazo. No veas que pinta que tienen estas plantas. Las flores aparte se ven bien resinosas. a sido una genética con la que disfruté mucho cultivarla, es algo complicada cultivarla pero merece la pena si eres cultivador con experiencia no te será problema cosechar. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Hasta aquí es todo , espero que lo disfrutéis, buenos humos 💨💨.
Likes
12
Share
@ohcibi
Follow
Approaching the finish line. Fertilizer is now at its final dose. Both plants stopped growing now and started to build thick buds. Ken in fact is way ahead in terms of buds but it might be because he Hase a little bit less in number. It’s possible that I trained Ryu too much for his pot size 😆😆. But let’s see. Both looking very good and a lot more powerful than in my first grow. Water intake is still massive. The top soil is rock solid while draining water super fast which must mean the pots are filled with massive roots. The erected teeth came down a bit but they were never that severe in the first place so I’m still not worried about that. I skipped one day of watering to account for possible slight overfeeding but I mean, today’s watering then was with the increased dose of fert 😆😆. I know I’m pushing it a little bit but that’s deliberate. I have high demands both in mass and quality so my approach is riding the edge as good as possible from the beginning 😆
Likes
48
Share
~ WEDDING CHEESECAKE FAST FLOWER by FastBuds ~ Well fam, here we go again with another epic strain from FastBuds Fast Flowering stable. After having such tremendous success growing their Gorilla Cookies Fast Flower outdoors last year, I've decided to run another of their fast flowering strains outdoors this year... Wedding Cheesecake Fast Flower! The best description of this awesome cultivar comes directly from my friends at FastBuds which is as follows: "A delight for the mind and body: Wedding Cheesecake FF (Fast-Flowering) is a delicious strain that offers XXL yields in a 7-8 weeks flowering cycle. This terpene powerhouse produces loads and loads of mouth-watering vanilla-creamy-cookie-scented terps with hints of citrus and cinnamon. In addition to its delicious aromas, this variety grows very well in both indoor and outdoor setups, yielding up to 650 g/m2 without extra maintenance, making it the ideal strain for beginners as it allows you to maximize yields while minimizing work. This super-fast feminized photoperiod version offers upbeat and energetic yet deeply relaxing effects that are perfect for consumers looking for a heavily focused, motivating, and creative high. It’s the ideal strain for those needing that extra energy boost to start a busy day on the right foot. Wedding Cheesecake FF boasts chunky, large-sized buds with a thick layer of silvery-white resin and bright orange hairs scattered all over: that just screams ‘quality’. The lime-green flowers sparkle with an array of hues ranging from dark to light green, to magenta and purple, and reek of a delicious aroma that’ll remind you of fresh store-bought cheesecake. This is an XXL hybrid that grows extremely tall in height, reaching up to 3m with one huge main cola and multiple long side branches that can withstand enormous yields of up to 650 g/m2 with ease. Wedding Cheesecake FF is extremely resilient to the elements and can be grown in almost every climate as long as you’ve got the space and basics covered, making her an excellent choice for those looking for large-scale harvests with a quick turnaround time without much effort." ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: This is going to be an outdoor grow, but I have started the Wedding Cheesecake FF indoors as our weather is still too cold to put her outside (nighttime temp's dipping regularly into the 30's℉). The plan is simple... let her grow inside under a 19/5 light schedule until the nighttime temperatures stay above the mid 40's℉, at which point she'll be moved outside and transplanted into the soil which I have already setup and inoculated with beneficial microbes, and then let the fun begin!🤪💚 ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 6/18- Week 12 and the Wedding Cheesecake Fast Flower from FastBuds is on a mission! The amount of growth happening right now can only be described as explosive, with new shoots appearing and existing branches going crazy with growth! 6/20- Our summer is here and we're under an early heat wave this week with daytime temp's hitting the mid to upper 90's ℉ with heat indexes in the low 100's ℉... in short, IT'S FNG HOT!🔥🔥🔥 I'm watering the Wedding Cheesecake FF daily now with 5-7g of straight well water from the garden hose. I'm watering at sundown so that the water will have some time to soak down into the soil before the heat evaporates it. The coating of straw that I previously spread over the soil has helped a lot as well. 6/22- The weather continues to relentlessly bake everything outside... many thanks for a good A/C!❄️ The daily watering continues and I also went ahead and removed a bunch of foliage that was below the trellis net. 6/24- Today I top dressed the FastBuds Wedding Cheesecake FF with 2 cups each of Gaia Green 4-4-4 and 2-8-4 along with 1 cup of Down To Earth Bio-Fish 7-7-2 and 1/2g of Wiggle Worm castings. After top dressing and working the amendments in by hand I replaced the straw coating over the soil and watered them in with 5g of straight well water via garden hose as usual. There goes another week for the Wedding Cheesecake FF and it won't be long before she begins to show signs of pre-flowering! Thank you for checking out my diary, your positive comments and support make it all worthwhile! 💚Growers Love!💚😎🙏
Likes
19
Share
@MrJones
Follow
~~~~04.20.23~~~~ Day 51 - Above Ground - Target 65 Days 📝Saturday 06.10.23 - As this week comes to an end, I am seeing signs that the plants need a bit of calcium, so today was a topdressing day with a 70/30 blend of Bloom to Grow, watered in with H20 PG to 6.2 with CalMag at 5ML per Gallon of H20. Look at those Frosty Buds! 📝Thursday 06.08.23 - Watering with H20 PH @ 5.8/6.5 the buds on these girls are just getting crazy fat!, the new light setting is doing very well, and the plants are praying hard, and the Medic Grow Smart 8 Flowering Setting 1. ~~~~~~~~~~~ 📝@fastbuds_official 📝Soil - ProMix HP 📝Medic Grow Smart 8 LED / Light Settings: 40% - V1 📝@medicgrow420 📝@gaiagreenorganics ~~~~~~~~~~~~~ 📝Cinderella Auto - grows dark-green thick buds with elongated large-sized calyxes and lots and lots of long amber hairs all over them.
Likes
9
Share
- Worried about overcrowding of leaves and not enough light getting through. Based on research it is not good to trim Autos but i found later in this grow that my plants were strong enough to trim and actually seemed to benefit from more light being able to get through to lower branches - Lots of growth still even though flowering has begun and due to it being an Autoflowering strain it will keep growing - Had a bent stem this week on one plant, splinted it and seemed to have regenerated -
Likes
9
Share
@GYOweed
Follow
This was the squatest clone and grows thick heavy glowing marshmallow colas. Smells so sweet too soon to tell final taste.
Processing
Likes
6
Share
There was a change of plans this week I got in 5 clones of an exotic strain I've been trying to get for a few months finally the guy gave in lol. I switched most of my plants to the flower tent to make room for my new strain. I decided to try and make fem. Seeds with 2 of the ladies ( og kush and gg#4) Using colidal silver. Feed plants my first compost tea I've ever made plants seemed to love it. My gg#4 in the dwc is growing like crazy she's catching up to it's mother she also got thrown into flower.
Likes
285
Share
👉Alrighty Then👈 So we are at DAY 21 with the Sugar Larry 👈 And she's doing fantastic 👍 Except for some slight watering , ive been doing some defolation as well as some LST manipulation to pull branches to the side 👌 👉WeeklyRoundup Video is finally posted 😕 😒 😪 😢 Happy Growing 👉Soil Provided by ProMix.ca 👉Nutrients Provided by Agrogardens 👉Lighting Provided by MarsHydro.ca Thanks my friends for the great support over the years 🙏 Happy Growing
Likes
7
Share
After some adjustments needed due to the heat of the lamp, I was able to stabilize my tent temperature to under 26c. I had to move the light to 2 ft away dimmer at 80% as the tips of new leaves shooting up fast and showing light burns. Mysoil PH climbed to 7.5 so I adjusted ph using big bud by advanced nutrients which drops my solution to 6. This will work for the time being. I've opened up the tent to allow air to flow more freely from the room as the outside air being pulled in had less than 400ppm after some careful measurements. This lead to drops down to 330ppm. I have since closed the vent. Opening up the tent increased co2 levels by 2-3 times. I overkilled fan department added a 16 inch oscillating fan. In the morning it has a strong smell before lights on.
Likes
1
Share
Likes
52
Share
@WhiteEdge
Follow
28.04.2024 First harvest in this run! Tropicana Cookies No1 is a winner.) First Tropicana Cookies is harvested on 89 day from seed. Total 55 days off flowering. Fast flowering indeed as fast in vegetative stage. Cut this girl in branches and hang upside-down in smaller tent for drying Set RH @ 55% , temperatures not able to control so they will be something around 20-21 in drying tent Second Tropicana will be chopped within a couple off days In this cultivation, I used commercial LED lighting for the first time—the HLG Scorpion Diablo 650w, a beasts of light. It helped the plants beneath it develop exceptionally hard heads without heat-induced stress. The light spectrum is excellent, and the plants under it appear much healthier than those under my old light. They also finished faster, if that has any relevance. After numerous failures and difficulties with the timers I used for pumps and electromagnetic valves, which resulted in interrupted irrigation on several occasions, I believe I’ve resolved those issues. The TrolMaster programmable devices work perfectly in recycling mode. The ability to adjust times in seconds is precisely what I needed! The TCS1 Tent-X brain, equipped with an excellent sensor for temperature, humidity, and light detection, is remarkably accurate with rapid value measurement response—faster than the AC Infinity 69PRO controller. My favorite piece of equipment is the AMP3 sensor with pH and EC probes. It performs exceptionally well—precise and accurate. Integrating it into the system is as easy as a breeze. All equipment and sensors can be added fast to the entire system. Additionally, the humidity control I use with the Corroventa K3HP air dehumidifier works like a charm! I am extremely satisfied with TrolMaster equipment and highly recommend it to anyone in need of a precise and reliable system for their grow tent, especially those using hydro or aeroponic cultivation methods. 01.05.2024 Checking TC in drying tent, perfect conditions, i will like more to have cooler temps but ... Six days already drying, think a 4-5 more and trimming. Tomorrow or day after is harvest off second TC and probably one Purple Lemonade... 12.05.2024 First Tropicana Cookies is ready for trimming and curing. Hard and dance buds. Try some small bud, very strong stuff! From first early girl i got 128g net weight Second Tropicana Cookies is on trimming session within couple of days.. 15.05.2024 Second Tropicana Cookies get trimmed. Amazing plant in term of bud density and aromas that it have. Hard and high odor buds. From second girl i got 131g net weight Total dry bud mass from two plants is 260g, Total power consumption for this two girls is around 180w. Total power used in whole tent is 720w at its maximum peak for 8 plants. Next week after leaving it in Grow Bags , first smoke review, can wait ! Overall growing Tropicana Cookies was easy grow with lot of fun. This girls are resilient to everything, from bad weather and less than perfect climate conditions. They except all. Growing two plants i can say that they grow very uniformly, finishing at same height and overall same density, size and shape. Almost like from a cutting. That is what i really like ! In future i gonna to grow this lady's at least one more time but with difference, i will grow them as only strain in same tent. Combining them with Purple Lemonade and Wedding Cheesecake was little bit challenging, i feel that either off three cultivars didn't show the best off them. Main deference was plant height and nutrient requirements. Highly recommended strain for everyone !
Likes
8
Share