09/13/2018 Nutes up to 2/3strength, going up to full at next reservoir change. She is putting on nice growth, had to raise light due to leaf burn, but only one leave affected, I think I will flip to flowering next week. She has 9fingered leaves but in veg she's very Indica like, hopping she has more sativa like flower stretch.🙏 Topped and lite defoliation.

After 4 days of heavy rain, the first mold appeared... So I spent about 18 hours searching for plants and picking out mold with tweezers After last year's experience with another seed bank, I expected the plants to be very affected by mold, but I have to say that Fast Buds genetics coped very well! Mold appear mainly on blisters to which the stem of the leaf leads water, which then collects between the stem and the blister I trimmed the plants more so that the air flows better and that water does not stick to them The plants look healthy and the flowers are gaining strength Especially the dark purple phenotypes look very dense and hard. it also looks very resistant to mold Very pleasant sweet fruity scent I haven't seen my children for 3 days, it's raining extremely ... the last time I was chased out by swarms of ants in the early evening, I've never experienced this before, there were maybe a million of them and they sat on me and on the plants I'm finally going to visit them tomorrow, I expect I'll have a lot of work to do with mold and I hope the swarms of ants haven't harmed them in any way

Decided ima leave her in vegataive stage till she recovers some more from the lst/hst been using cannacure to help with the mystery pests and deformed leaves have been seeing her start to regenerate and new growth is visible thinking week 7 or 8 till I switch her to 12/12 light schedule to flower bit streaching side branches and smaller side branches off the side branches are forming I’m noting more developement by the day

26.12.24: I have noticed light stress on my plants. I had moved the lights further away and increased the light intensity to 70%. Unfortunately that created some issues. Namely severe palour of the leaves. To try and rectify the situation, I've dimmed the lights to about 30%, staying at the same distance, about 30 inches away. I measured the par levels, after I did this. They should a reading of anywhere between 40 and 150, at the canopy of the plants. They are all different sizes. This seems to have improved the colouring on all plants. After this evenings watering, I will monitor recovery and increase lighting intensity again slowly. I am also using the light cycle of 21/3, so the plants have many hours more light to absorb, than for example 12/12 or 18/6. 29.12.24: So I finally gave LST a shot, it's probably a bit too late, however I really want to get the most of the triploid pheno, and I went a little crazy and LST'd all plants except 2, as they're too small. I did that late last night, this afternoon I was amazed to see the plants turn their leaves back to the light source. I'm glad I overcame my fear of trying it. I'm very excited to see them adapt and progress! 😁 there are videos above with before and after of my LST process. I am pleased with the progress, considering all of my mistakes! Thanks for checking out my diary 🍃 ✌️

Okay had to start 2 purple strains one of them being LSD-25 and the other Blackberry in the second journal. I still have 2 open air pots filled to the brim with fox farm ocean forest, froggy frog, and coco choir in approximately a 2:1:1 ratio. I'm still anticipating the unreleased strains from fastbuds fingers crossed. I placed both these girls taproot down right before the Eclipse. Day 1 above ground: August 23rd. I like to stretch them early to allow for more room for watering since I like to bush them out. Stretching them early allows for a long strong stem and hopefully sets the precedent for future growth rate. Stretched them out s littlllllle too much haha forgot my light was in 50%. No harm no fail. I'll take better pics when they take off.

This week went real well! All 5 of the Twenty20 Ogreberry Autos and the 1 Fastbuds Bruce Banner have successfully germinated and sprouted up from the soil!! This upcoming week we will start giving these girls a heavy feeding of nutrients PH d at 6.5 an see how they react , most likely will love it!! Temperature an humidity has been on point, through out the day we reach 70-75 degrees an a nice humidity of 65%which is always nice ! Hope you all enjoy an keep them eyes peeled for next week !! Peace, love, an positive vibes to all you Growmies out there! If any questions please feel free to ask , more then happy to help! Cheers everybody to another great grow!!!

Día 94 (02/09) Aplico Insect Frass como Top Dress para ver si revierto un poco el amarilleamiento que muestran algunas hojas, ya que empieza a ascender por la planta Riego con 500 ml H2O pH 6,5 Día 95 (03/09) Dia nublado y de temperaturas entorno a 24 ºC. NO es necesario regar! Día 96 (04/09) Llueve que te llueve! 🌧️. Temperatura 21 ºC. Días de humedad alta por aquí! Riego con 500 / 1000 ml H2O pH 6,5 Día 97 (05/09) Floración en progreso. No veo ni una sola oruga con el bacillus thuringiensis y espero que siga así! 🤞 Dia muy nublado. No hace falta riego Día 98 (06/09) Riego con 500 / 1000 ml H2O pH 6,5 + 4 ml/L de BioGrow de Biobizz para tratar de parar el amarilleamiento que asciende por la planta Día 99 (07/09) Riego con 500 / 1000 ml H2O pH 6,5 + 4 ml/L de BioGrow de Biobizz para tratar de parar el amarilleamiento que asciende por la planta Día 100 (08/09) Riego con 1 Litro de Té Floración de Lurpe Solutions. Preparación: 24 horas con bomba de aire (oxigenación) con ingredientes: Healthy Harvest 8 ml/L + Insect Frass 16 ml/L + Hummus Lombriz 8 ml/L + Melaza 1 ml/L + Kelp Hidrolizado 0,25 g/L Aplico de nuevo Insect Frass como Top Dress 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

📆 Semana 6 ¡La cosa se pone seria! La Gorilla Cookies sigue a tope, y esta semana se ha notado un buen avance en la densidad de los cogollos. Las flores ya empiezan a coger cuerpo, y la producción de resina va viento en popa: las hojas cercanas a los cogollos están llenas de tricomas que brillan bajo la luz como si fueran escarcha. Sigo utilizando la línea de floración de XpertNutrients, que la planta está asimilando de maravilla. Mantengo el aporte de PK en niveles óptimos y hago pequeños ajustes de pH cuando toca. El riego sigue estable, sin excesos, y la respuesta de la planta está siendo excelente. Los Adlite están haciendo un trabajo brutal. La penetración de luz y la cobertura en todo el dosel están marcando la diferencia: se nota en cómo engordan los cogollos incluso en zonas más bajas. A nivel ambiental, todo bajo control: temperaturas suaves (23-25°C) y humedad bajando un poco más, ya cerca del 55%, para evitar riesgos en esta etapa tan crítica. En cuanto a aromas, se están intensificando con toques dulzones muy golosos, fondo terroso y ese puntito a galleta que promete una flor final de categoría. Los tricomas siguen lechosos, sin rastro de ámbar, así que seguimos en modo engorde. Seguimos creciendo fuerte 💪!

the week passed splendidly, the bushes began to bloom and the smell was crackling the plants develop very well, I continue to water them with clean water and do not use chemicals. I removed the large leaves that were inside, on the sides I left now the light penetrates better in the middle

Semaine très tranquille, j'arrose toujours tout les 5 jours environ et en ajoutant 1 fois sur 2 sur BioEnhancer. Intensité de FC3000: 50% Ventilation : extracteur 6 pouce mars hydro power 2/10 ( on 24h/24h) + 1 ventilateur oscillant ( on 12h/24h) 🍊👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍋👨‍🚀🍊 Venez me voir sur Instagram ✌️👨‍🚀 https://www.instagram.com/hou_stone420/

This week is almost the same as last week. Did some LST and Defoliation. Got rid of some stuff close to the plants so now they have more space. They started to smell so I have to buy some other plants as well like the Jasminum polyanthum, because I don't want any complaining neighbours.

Starting out good... going in the tent soon. I still have to buy 2 components for ventilation... the inline fan and charcoal canister to cover what I hope will be smellin earthy and stinky and sweet very very soon. 6am 4/1 - Putting the tent up.. might not fit though.

Una genética muy fácil de cultivar, además tiene un rendimiento muy satisfactorio tanto en resina, un efecto cerebral muy relajante perfecto para abrir el apetito o dormir con un olor dulce inolvidable!!! Siempre gusta tener estas variedades en nuestros botes de cristal!!💚

🎩🌈🍬 sweet candy gas ⛽️💨

End Royal Queen Seeds Mimosa Auto

This is week 9.2 I’ll chop them all down this week til then 2 days if darkness they go now I’ll let them start drying in the stem then chop in 2 days then off to the drying process for a few weeks Purple lemonade coming down last week didn’t have a smell really too much into this grow but finally after a few weeks a grape like smel is there better than nothing lol bjt superrrr frost plant love how it grow and the buds look great but wish it had more of a smell and isn’t very sticky either surprisingly super dark purple colors with really bright green spots with orange and red fading out too leafs all happy and man I really like this plant wish it had that punch to it This plant is exactly what you would expect from it gets orange and yellow all around when fading smells just crazy of 🍊 got some good sized buds all around it this plant just reeeeks it’s so gassy but straight orange super strong can smell the orange before even getting close very sticky but not to frosty on sugar leafs at all had some nice calyx development was always a happy plant even when under fed fully organic 444 and 284 Gaia green Gg4 Sherbert This plant had a very light color most of its grow this plant has a very very orangy lemony chemical smell like almost like simple green cleaner which is weird but it’s a good smell when coming from weed 🤣 very strong smelling it might want more light cuz then leave never point up everywhere only some places I really do like this plant now it went from one of my least favorite because of it’s growing just wasn’t what I like but it’s quickly became my most unique plant I’ve grown so far maybe I’ll try a reveg one week later and the color changed to yellow and purple such a awdome looking plant

Well i ran into some problems, water temps too high over the weekend (i wasn't there) but roots and plant still looked healthy despise 24,5°C water temp over 2 days. I added 2,5ml each Hydro A & B on day 15. EC rised to 0,89 / PPM 445 and two days later ppm still the same i guess because the only part of the root touching the water couldn't uptake any nutes because of the high water temp? (everything above the water looks healthy af tho) Since my apartment is usually really hot in the summer i bought a TEC peltier water cooler + pump and a thermo regulator to ensure the water temps will stay between 20 and 21°C. i just need to wire that up and diy saved me me a lot of money. i payed about 100€ and have automatic temperature control and a cooler from amazon about 200+ € so i think its fine. I'll show you the set up once it's completed and works. Its the best budget cooling i could get my hands on imo. Today is Day 19 my parts came and i really managed it to half ass wire shit and not burning down something. wish me luck. I payed a total of 93,22€ and now got a really quiet, 150w DIY Peltier/TEC) cooler that automatically turns on once the water temp hits 21°C (69,8F) and stops when hitting 20°C. So far its working REALLY well. like im amazed and so proud i managed to do that and it was pretty easy. i had big problems with temps in my attic flat and water temps quickly rising to 24° and more which means root rot. Since i use the cooler all new roots just looking healthy as fuck. the plant is growing well and i see every day progress. So i saved a shit ton of money. the cheapest water cooler i could find on amazon was around 350+€. Sure it bet it works better, is safer to touch, not very likely to cause burning down my house because i had to twist copper wires together and let 230V run trough it BUT no way i have that much money for things like that. The cooler cools water temps from 21,5° to 20° in about 15minutes. the longer it runs the better it cools. i bought a temperature controller outlet ( 25€) which let me set 2 temps and it turning the cooler on and off. I had to cool it down manually every 2 hours before with frozen water bottles💀 So here are the stats for day 19: Water Temps: 20-21°C / pH: 5.42 / PPM: 485 / EC: 0.96 / height: 2,5cm (lol) (i added some more Hydro A and B because i thought i maybe see some nitrogen deficiency) i bet i will see some RAPID growth now since everything is dialed in, hopefully lol 150g im coming!

Just a video of the girlies