Likes
Comments
Share
@DevilsBud
Follow
FLOWERING IS UPON US for all of the strains I wanted to let the 2 purple berry Kush veg for another week but forgot to put them under the TS-1000 but hopefully there still gone grow fine it is experiment achter all. Have made the switch for 12/12 couple day's ago and i see them all developing 😍 hopefully by the end of next week it will get interesting đŸ‘ŒđŸ» visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 ÎŒmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
58
Share
@AsNoriu
Follow
Day 50. Very busy, no time for proper updates,next week I'll do better ! Furthest row, in the middle , third row middle and most beautiful in all tent are FB's babies !!! Happy Growing !
Likes
19
Share
@sativamsi
Follow
25.10.2020 - 12/12 ıßık periyoduna geçildi. Bio bloom ve topmax gĂŒbresi eklendi.
Likes
16
Share
@OreOhs
Follow
I started to train with a base I purchased from @supherpanda. I didn’t want to put any holes in my bag which is why I went with the base. I also did some fimming. We will see what the outcome is.
Likes
Comments
Share
She is growing amazing no problems so far will list all ingredients later
Likes
35
Share
- I didn't weight wet buds. - The trichomes photos have been taken just before the harvest on buds all over the plant. - First time I see and have pink trichomes, they are beautiful! - The hash ball was a little less than 1cm diameter and was really good :) - Drying was made at 20°C and around 50% of humidity. - Humidity in jar between 60 and 65% on the first day, temperature around 20°C. Veg time : 56 days. Flowering time : 63 days. Total time from seed to harvest : 119 days. Height : 81cm Pot size : 26l
Likes
26
Share
Gracias al equipo de FastBuds y XpertNutrients sin ellos esto no serĂ­a posible. 💐🍁 Gorilla Punch (Auto): Niveles fulminantes de THC. Testado en laboratorio con un 25,695 % en cannabinoides. Perfil rico en terpenos. Los complejos y sabrosos terpenos de esta variedad son codiciados tanto por los extractores como por los fabricantes de hachĂ­s. Rendimientos impresionantes. Los cultivadores pueden esperar hasta 550 g/mÂČ de flores deliciosas y aromĂĄticas, rebosantes de THC y otros jugosos cannabinoides. Prueba de excelencia. Dos premios al primer puesto en menos de dos años dejan claro que esta cepa es una autĂ©ntica campeona. đŸŒ»đŸš€ Consigue aqui tus semillas: https://2fast4buds.com/es/seeds/gorilla-punch-auto ⛜ XpertNutrients: es una empresa especializada en la producciĂłn y comercializaciĂłn de fertilizantes lĂ­quidos đŸ¶y sustratos🐛, que garantizan los mejores resultados y cosechas de la mĂĄs alta calidad. A travĂ©s de una cuidadosa selecciĂłn de materias primas y un proceso de producciĂłn avanzado, sus productos son sinĂłnimo de resultados confiables. 🛒 Consigue aqui tus fertilizantes: https://xpertnutrients.com/es/sobre-nosotros/#:~:text=Xpert%20Nutrients%20es%20una%20empresa,de%20la%20m%C3%A1s%20alta%20calidad. 📆 Semana 6: Parece que el temporal por fin se va a pasar esta semana, todo esto le ha afectado aunque puede que de un estiron esta semana. Se aprecian las primeras preflores. Voy a aplicar unas enzimas para ver si asi se recupera de todo este estrĂ©s que tuvo.
Likes
31
Share
Esta semana a una de las plantas de maceta se partiĂł por la tormenta...a las otras las veo bien..pero creciendo lento en comparaciĂłn de plantas de colegas amigos. El olor leve tiene como a notas frutales, dulces,espero que los cogollos engorden un poco masđŸ’Ș🙏😅🚀đŸ€Ș
Likes
11
Share
This was the plant that leaned more sativa, even though all three of em were very sativa. She has the smallest nugs, so we shall see how she comes down.But this was the mother to the second generation of otto strains.I've made two years ago. That plant was healthy enough to help me make approximately 10000 Otto. Hybrids, and I will slowly be testing them out later this year
Processing
Likes
13
Share
Likes
12
Share
@DBQush
Follow
Dear diary, Week 5 completed and after a scare last week with magnesium deficiency, we were able to get it sorted and continue the mainlining. 🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀 ⏰ Day 32: Gave a foliar of calmag water at 3.0ms 6.1ph during light off so it’s more gentle on the leaves followed by a regular feeding at 1.46ms 6.1ph. Still seeing some deteriorating continuing on lower leaves, so will get epsom salt tomorrow to really target magnesium and increase the calmag with 0.7ml/l in feeds going forward. ⏰ Day 33: Gave a foliar of epsom salt at 6.6g/liter(3.2EC 6.3ph)as lights went off but as I read more my ratios were off and I diluted the solution with 50% regular water. Regular feeding at 1.45ms 6.2ph was given at lights on. When inspecting the girls a few hours later they look a lot healthier already, so clearly magnesium was the issue. Will give them today to recover and if everything keeps looking good by tomorrow, I will do the next topping. If so I will have lost 5 days of progress due to the deficiency, but that’s the upside with photos I guess vs autos. ⏰ Day 34: Another foliar of epsom salt applied and feeding of 1.5l each at 1.56ms 5.8ph. A few hours later topping nr 2 done making it 4 tops each now and stripped the remaining growth. I did however leave the fan-leaves attached to the new top node and for W.C #1 I left another set of fan-leaves for an extra boost as she’s a bit behind. ⏰ Day 35: Did a quick check before lights off and they are praying and looking good considering the topping. Then I did a regular feeding at 1.56ms 5.5ph when lights went on. Still looking good and no continued signs of the magnesium issue. Lastly I removed the extra 2 fan-leaves I had left on WC #1 as her new tops are growing nicely and turned up the light slightly. ⏰ Day 36: Regular feeding at 1.56ms 5.6ph. Girls are looking healthy and enough has grown out that I can start tying down the 4 new mains. Will probably top them again in 1-2 days if everything progresses nicely. ⏰ Day 37: Foliar of epsom given just as lights turned off followed by regular feeding at 1.61ms 5.8ph when lights turned back on. ⏰ Day 38: Regular feeding at 1.61ms 5.9ph. Topping nr 3 was also done bringing it to 8 tops each and I will do the 4th and final topping as soon as the nodes have developed a bit more.
Likes
Comments
Share
BlĂŒte Tag 14. Der Wasserbedarf ist bei allen gestiegen. Sie bekommen jetzt tĂ€glich 350ml. Sonst alles wie in der Vorwoche.
Likes
14
Share
Very easy plant to harvest, didn't have too much leaves, so very easy to take out fan leaves and prepare to dry.
Likes
23
Share
@MistaOC
Follow
28.01. Day 3 Just relax and get an eye on the vpd! In my case looking for 0,6. But temp. Is very cold with 19 degrees —————————————————————— 30.01. Day 5 Same —————————————————————
Likes
32
Share
@Diips
Follow
week 14 day 100 of bloom we are finally starting to get closer to the end
Likes
10
Share
Looks good from my house lol any input would be greatly appreciated guys thanks in advance! I have a couple that I’m worried about will post more video soon sorry. Good luck buds!đŸŒłâ˜˜ïž
Likes
17
Share
@Drtomb
Follow
Im in the middle of week 5 and everything ia stacking nicely. Ive grown this clone before and i know it runs 65 days. Whoch means 33 days of flower left. Its cruise control heading forward. 3 weeks before harvest i will start a 3 week flush. I will change my reservoir once a eeek during this time. Then harvest. Hit subscribe and follow along! Also add me on Instagram if You'd like: Tegrity.Farms.Canada
Likes
6
Share
Belle variĂ©tĂ© Je trouve juste qu'elle pousse tout doucement par rapport Ă  d'autres mise en mĂȘme temps
Likes
148
Share
@BioBuds
Follow
Greetings my dear Jungletamers, So a major surprise came when @MarsHydroLED contacted us and asked if would like to try out their new SP 3000 light. Being a fan of Mars Hydro for years, we of course accepted their offer. We are totally in love with this light. I was when I saw it in another grower's setup and was in awe of its output and results. So with much pride and thankfulness for the presents the Universe bestowed on us, in the form of MarsHydroLEDS offer and the bountiful harvest of the last grow, (which I am thoroughly enjoying btw, such a great weed to have grown ourselves) we start out on a new adventure that we can't wait to share with you. With many lessons learned from the previous grow, a mighty producing strain in the form of Expert Seeds Gorilla Glue #4, a.k.a Expert Gorilla's and a tweaked super soil mixture, we are setting out to hopefully get over a gram per watt, preferably 1.5. The Setup A 4.5 (140 cm) x 2(70) x 6.2 (200) grow tent, giving me a .98 m2 workspace. This space is customized to my needs. A standing fan will provide airflow through the whole grow, a top fan will help guide cooler air past my lights onto the grow. 3 56 ltr pots will be the home for the plants when they are 2 weeks old, up to then in smaller jars. The Light The leading role and star of the show will be played by the Mars Hydro SP-3000, so kindly provided by MarsHydroLED, which we will test and review here and I might say, endorse. I'm very careful with who I endorse and support these days, but a company with that many wins in design, I'm talking ever since their first range came out in 2009 these guys have been raising the bar for the whole industry, I did not hesitate to support this leading brand. If you want to compete with these guys, you better bring some quality AND affordable pricing. Why do I endorse the SP-3000 without ANY hesitation? It is seriously THE BEST light on the market in this price range and size group. It has an enormously effective output in U/Mol and with 30% less energy waste comparing to older LED lights. Prove me wrong! And with a company holding a considerable market share selling thousands of units every month, competing on price and quality, one would think that customer service would suffer. Of course, also Mars Hydro is not perfect, but check the sheer amount of people that not only praise the light but also the service received, should the light somehow not perform up to par. It is this dedication to their customer base that made this company have a fanbase... Yes, a fanbase with a website and a wiki. So if you are looking to buy new lights, check out the END OF SUMMER OFFER at the Mars-Hydro Global Store on Aliexpress: https://marshydroled.aliexpress.com/ 👈 Check their offers but also their score, they ship from a warehouse near you so you don't have the extra import fees!! Cut out the middleman and have a deal on these lights!! At the moment I write this in August 2021, the lights are 408,20 euro when sent from Germany to the rest of Europe, that's 40 euro cheaper than the other Mars outlets, BUT EVEN 60 euros cheaper than ordering at a grow store!! The Strain: Experts Seeds - Expert Gorilla feminized regular. Don’t let the name fool you because Expert Gorilla is suitable for growers of any skill level. However, you do need to be an experienced smoker because Expert Gorilla is one of the most potent strains on the market. Lineage: Chem Sis x Chocolate Diesel x Sour Dubb Popularity: Extremely Popular Flavor/Aroma Profile: Chocolate, Earthy, Fuel Yield: 400 g/m2 Stress Tolerance: High resistance to disease Potency: 24% THC Flowering time: 58 - 63 days The Soil: Those who saw my Monstercropped Gelato #33 grow (you should see it if you didn't, I'm so proud of that grow), know about my super soil and organic nutrients/ permaculture tea combo that starred in my previous diary. Because of the great results, we are going to use the same recipe, adjusted some more with some new ingredients that will complete the mix and give an even more sustained super soil buffer. 20% Atami Bi-grow (very similar to ocean forest) 20% Atami worm castings 20% Atami Coco Coir 10% Hydrocorn 10% Peat powder 1 cup Fossil seaweed chalk 1 cup bonemeal 1 cup bloodmeal 1 cup Microlife 3-4 teaspoons of epsom salt 3 cups of activated biochar (activated with our own permaculture tea) I just made layers, starting with hydro corn on the bottom to aid airflow/run-off. On this I started layering the coco coir, Bi-grow, peat, castings, and amendments in a way that the more mature the plants get, the more phosphorous and less nitrogen they will find. Every time I made three layers, I would mix them by hand. This way we simulate natural soil, which consists of humic layers, composting plant waste, fungal and microbial life, and nutrients from fossilized sources. The Nutrients I will start with just adding 6.4 PH water, although this soil should buffer ph itself and regulate, after 4 weeks, I'll slowly be adding: - Biobizz Grow - Plagron Alga Grow - Biobizz CalMag - Biobizz Flower - Plagron Alga Flower - Biobizz Topmax - Melasses The Tea Some of you might remember the permaculture tea from my previous grow, I have a short video in my harvest page showing how we make it), it will star again in this grow. - (Rain)water - Comfrey (whole plants) - Dandelion leaves - Roots and leaves from the earlier grow - Minor periwinkle (Finca minor) is a plant we have in our garden, it contains an alkaloid that is associated with increased brain function but also is a light toxin for wee beasties and other unwanted guests like gnats (who hate it). - When flowering I add some wood ash to this mix Thank you for checking in on one of my grows again! Thanks for all the love on my previous grow, check it out if you haven't seen it!! Hug Bud
Processing
Likes
4
Share
Apliquei poda top em 12 esperando ve resultado (pois nunca tinha feito poda antes da aquele medo )para podar as 8 maiores