3oz dry weight from 1 plant! The maximum I've managed before was 18g and 20g per plant so a huge improvement from my first grow. Only issue is the buds came out airy, the tent was a bit hot throughout so think I need to up the airflow to remove excess heat in future grows. :) I've sealed the bud into mason jars now for curing, hopefully should be smokable in the early new year!

So many new nodes coming in after LST and topping, starting to become a sea of leaves. I am experimenting on all 4 with different training types in order to see which gives me the best result in my set up. The largest I gave LST and topped the 6th node, gave one only LST, one with only topping, and one with no training. Getting pretty hyped on what’s still to come

Tras un pequeño fallo con la iluminación (5 horas apagado cuando tenía que estar encendido ). He decidido hacer ya el cambio a floración,espero que no sea muy tempranero y se queden muy pekeñas las niñas . Mañana mismo empezaremos con los fertilizantes de floración controlando el pH en 6.5. Todavía no he defoliado nada y nose si quitaré alguna hoja o solo las intentaré apartar sin que moleste a las llemas .veremos cómo prosigue la cosa 💚 Adjunto un vídeo con el tutorado y la poda de bajos realizada .. Gracias growers!💚

Hello Smoking Buddies, how is growing? Another Beautiful week here in our gardening, and the flower are showing an amazing growth rate on the last few days. Day 64 - The plants were trained and defoliated, I noticed that some leaves are getting yellow on the plant 1, I suspected it is due to overfeeding. Day 67 - As suspected, the plan 1 shown more sighs that something is wrong, I'll water it with water only and wait a few days to take a decision Keep Growing 😎

So she got the chop 2 weeks prior to what I wanted, but I did not lollipop enough doing this Scrog and suffered high humidity, lack of airflow and as a result lost 4 tops... Out of 16 big ones. But I have harvest, wet trimmed and left to hang dry in a room on clothes drier. Room circulation fan on low, and temp is 22c with 51% humidity. Aiming for a 10day dry it maybe sooner. Then we will smoke test and cure then re test 🙌💚 Thank you all for following along this LONG and heartbreaking breaking Journey

OK, so we started the 6th week and the plant is showing some growing signals. It's impressive how a plant that looks really bad, can actually keep growing and developing itself. This week I've started to see some development on bud zone/spot, and I believe that even making some mistakes ate the beginning, I'll be able to taste some buds from this little girl.

think i overfeed a little bit the tips of the leaves show signs of burning so next will be 2ml bloom and 1 ml pk booster u can see the little burned tips of the leaf in the pictures. Guess it won't affect the growth of the buds. If u have any advice feel free to say :) Cheers Spekkoek

So Zkittles finally has the place to herself after the Pineapple Express was harvested yesterday ( it’s the fruit ) . With room to spread her out now she’s loving all that extra light and air flow and is becoming the biggest auto I’ve ever grown with a stench that needs covering up with candles and dryer sheets at the exhaust vent … ( good problems to have ) All going to plan a few more weeks of fattening her up some and it will be a successful grow .

Hi all the happy people here in GrowDiaries. This is my second cultivation ever and it will be fun to try a bigger space than my closet grows First, I'm just going to say I'm done with the construction of my new growroom. I put some pictures on the construction here in week one. The room is 2.14 meters by 1.7 meters and has a ceiling height of 2 meters. It provides a floor area of ​​3.6 square meters. I use a 54 Watt Lightwawe T5 for germination and 2 Pcs 400 Watt HPS lamps. I have a channel fan that replaces the room air about 40 times an hour to get a comfortable theme in the room, the air enters a fresh air intake from the outside. The air is purified through a carbon filter to then leave the room to the rest of the basement. Then I use that heat to heat the rest of the basement. I will use 8 pcs 15 liter Autopots to grow with and a 100 liter water tank that supplies the pots of water and nutrition. I will grow completely organically in soil and will watercure my buds to get the best possible medicine for me. But there are no cultivation rooms to be displayed here, so I continue with what is most important. I am very excited to see how the new growroom will work and how this CBD Fast Eddy plant from Royal queen seeds will turn out. CBD Fast Eddy Automatic is combining Cheese x Juanita la Lagrimosa x Ruderalis, Fast Eddy is a rapid growing, flavourful, and CBD-rich auto strain that goes from seed to harvest in 8-9 weeks, produce generous yields, and induce a clear, mellow, and most importantly, functional high. THC: 9% CBD: High Yield Indoor : 400 - 450 gr/m2 Yield Outdoor: 80 - 130 gr/plant Height Indoor: 60 - 100 cm Height Outdoor: 80 - 120 cm Flowering: 6 - 7 weeks Harvest month: 8-9 weeks after sprouting Genetic Background: Cheese x Juanita la Lagrimosa x Ruderalis Type: Sa 50% In 40% Ru 10% Effect: Clear, Painrelief Climate: Mild ----------------------------------------------------------------------- 2017-09-25. Week 5 starts. Added a video of the girls. Gave the girls water and nutrients. The beautiful girl is 41 cm high and have grown 5 cm in 7 days. I flushed the girl yesterday with 40 liters of tap water. Im lowering the humidity in the room with a dehumidifier and try to have 50% air humidity. She looks great and starting to bud up. ---------------------------------------------------------------------- 2017-09-29. Installation of the New light rail in the grow room. Its Advanced star light V 5.0. Added a video of it.

This week wrapped up the generative two phase or midflower and began the generative three phase. The plants were fed the nutrients listed daily. I like to keep the p and k up high during the first week to twelve days of generative three. This week the weather has been more cooperative but far from ideal. The highs have ranged from mid 70's to 90 degrees f. The nights are running low to mid 60's f with humidity in the 90% range at night. Humidity has stayed somewhat high during the day ranging from 70% to mid 50% a few days only. This weather has really been testing these girls resistance. Plants 1 and 2 have been immune to pm. Plant 3 has responded well to treatment with arber. All the plants got a medium defoliation which helped. Everyone stacked this week. They have all reached their maximum height. I used the height of the tallest 87.5" for the official height. The two shorter plants are 61 and 62 inches.

See comments in videos. I will say, I am loving my AutoPots. It has taken a huge burden off the growing process, not having to water everyday or every other day. So much, that I have purchased a 4 Pot XL system for my smaller tent. Grow easier, with #AutoPotUSA.

Starting week 3 of flower Molasses water Light defoliation

If you are lonely when you are alone, then you are in bad company. Bee pollen is considered a “vitamin bomb” due to the presence of almost all vitamins with an average of 0.02–0.7% of its total content, with a higher amount of water-soluble than fat-soluble vitamins. Bee pollen contains vitamins A, D, E, B1, B2, B6, and C. It also provides minerals such as calcium, magnesium, phosphorus, potassium, zinc, copper, manganese, iron, and selenium, I mixed a bunch of that with some honey and RAW cane molasses to make a nice big bucket of tea. A family friend who is a beekeeper was kind enough to share some honey. The nutritional content of raw honey is impressive and includes high levels of protein, amino acids, B vitamins, calcium, manganese, potassium, magnesium, zinc, and iron, as well as various polyphenolic antioxidants. I am loading up nature's finest sugars, and sweet things, Honey & Mollases. UV-B-induced DNA damage (CPDs and 6–4 PPs) can be repaired efficiently by photolyases. Pyrimidine dimers can be repaired by nucleotide excision repair (NER), or bypassed by replicative polymerases (Britt 2004). The expression of the CPD photolyase (PHR) gene is induced by UV-B light dependent on UVR8 signaling pathway, and is also induced by blue and UV-A light (Li et al. 2015) https://link.springer.com/article/10.1007/s44154-022-00076-9?fromPaywallRec=true Old but gold. The camera picks up far more light than there is during the night cycle, camera is showing bright pink violet collages but my eyes barely see a thing, about 0.25ppfd in that tent overnight. Have been tweaking the spectrum of moonlight/intensity and watching the responses overnight. Tweak, tweak, tweak all week. PAR is 400-700nm, Overnight UVA in the tent is all 365nm and 385nm, so the meter only picks up a fraction of the light curve that makes it photosynthetically active past 400nm. Of the light in the tent, 0.25ppfd is from UVA Looks like It makes them 🕺 🕺 💃 all night. Better flower soon or ill be screwed for space, they are stretching, but is it "the stretch"? She has fire in her belly. Growing crops with insufficient light (i.e., below “optimal,” as defined here) limits the yield potential, which in turn wastes the other production inputs including labour, water, nutrients and electricity. As lighting fixture is one of the most expensive investment of the production, what is the relationship between light intensity and yield? Potter and Duncombe (2012) grew cannabis plants with varying canopy-level PPFDs during the flowering stage and found that increasing PPFD from 400 to 900 μmol·m−2·s−1 increased yield an average of 1.3 times higher, across seven cultivars, with no light intensity treatment effects on floral cannabinoid concentrations. Vanhove et al. (2011) found that cannabis yields were 1.3 to 3.1 times higher (depending on cultivar) when plants were grown under approximately 1000 μmol·m−2·s−1 compared to approximately 450 μmol·m−2·s−1 during the flowering stage.It was predicted that cannabis yield would exhibit a saturating response to increasing Light intensity, thereby signifying an optimum light intensity range for indoor cannabis production. However, a new research from Morrison (2021), after 81 days‘ experiment, found that When plants grew under LI ranging from 1200 to 1800 μmol·m–2·s–1 provided by light emitting diodes (LEDs), inflorescence yield increased linearly as LI increased up to 1800 μmol·m–2·s–1. "Cannabis will not stop flowering if the lights are turned on for a few minutes once or twice during the 2-month-long flowering cycle. If a light is turned on for 5 to 30 minutes—long enough to disrupt the dark period—on 3 to 5 con­secutive nights, plants will start to revert to vegetative growth." "Less than one half of one foot-candle of light (0.1ppfd) from sunlight will prevent cannabis from flow­ering. That is a little more light than is reflected by a full moon on a clear night. Well-bred indica-dominant plants will revert within three days. Sativa-dominant plants take four to five days to revert to vegetative growth. Once they start to revegetate, it can take from four to six ad­ditional weeks to induce flowering again!" Guess ill find out my answer soon.

Bald wird geerntet :)

I find a number of new leaves develop. They all look healthy. However, her old leaves look light-green, which might result from nutrition deficiency or excess. As shown in the video, her leaves look stretched in the morning and withered in the evening. Her stems look a little bit thicker. Some part of them look turning red. I do not figure out why they are. The height of her body does not seem to change drastically through the week. I am afraid of her growth losing energy. I would like your suggestion to think on it, for we cannot grow without thinking. "Man is only a reed, the weakest in nature, but he is a thinking reed." In the city of New Leningrad, 2021-02-08.

No nutrients at this point yet as it is just a baby. Not even 7 days old 😀

Ive had some really hot days out here bur the airco really saved the day. I can keep my temps at 24c ish on average ranging from 22-27c. Cant really get the humidity down 50s but with loads of airflow I should be fine. Its ranging between 50-60% right now. Theyre smelling quite strong. I am venting out of a windows through a carbon filter and I smell nothing within my house or around. She is getting really frosty and one of them has purple hues in the buds. (Picture 1) One of them is a really odd phenotype (picture 2) with extremely long leaf stems. Which kinda is nice as the buds are looking to grow bigger down at the colas because of this. Hardly have to defoliate that one. Edit: decided to add some cal-mag at half stength to the watering. She was showing signs of a calcium deficiency. Ppm was in range aswel as the PH, so it must be calcium deficiency as it only shows at leaves closest to the light. Yellowing also started appearing on the top.

Week 15 in 2 days(Day 41 today Saturday June 18, 2022 @11pm) Running a high ppm for entire grow so last 2 -3 week dropping to zero(0) ppm to drain plant real good

Cal Mag Issue occured, today i start feeding CalMag the first time.

This update is coming only a few days after my previous one as I delayed that one by a few days, now we are back on schedule. The girls are continuing to pump out resin, and the buds are slowly gaining more weight however they’re still pretty small. I have faith they will bulk some more before I harvest next week, crossing my fingers. Harvesting next Wednesday, really hoping to see the pistils get closer to 50% amber at least. Since I am having to harvest early, I have made the executive decision to not flush and continue with nutes all the way till chop. I would prefer them to continue to bulk as much as possible and I don’t see much of a reason to flush a plant that isn’t fully mature yet. I also read that people don’t actually notice very much of a difference from flushed and not flushed weed, so take that flushers! Jk, I would actually flush if I had the time :,(