Likes
Comments
Share
Flowering day 87 since time change to 12/12 h. Hey guys :-) The Grinspoon blooms and blooms 😂 She keeps getting new pistils but the trichomes are starting to turn milky :-) . I think it can be harvested in the next 14-20 days 👍. Would even be a faster phenotype this time :-) The last one had 136 days. Was poured 3 times with 1 l each (groundwater see description at the bottom) Everything was made clean. Fresh osmosis water is applied and the plants are sprayed and checked. Stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.barneysfarm.com/dr-grinspoon-5 Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Likes
2
Share
•Morning of day 19, ¾ through week 3. Did a light defol on both ladies. I gotta say I'm a big fan of Big Bud by Seedstockers! This girl is going to be exactly what her name is. I know its early with roughly 40 days to go, but I will for sure be growing this girl again. Any suggestions drop me a line. Happy gardening and stay safe Gromies! 🔥🌱🙏🖖✌️😷 •Morning of day 15, start of week 3. °Big bud is 32" in diameter after more LST. And 37"tall (soil to top). Less stretching and more compacting of nodes. Very pleased! She's feeding at full strength and looking like she might want more. Very vigorous growth. °Agent Orange. 30" in diameter after LST. plant did NOT respond well to LST. AND IS 36½" tall (soil to top). Also showed signs of nutrient burn. Will only feed half strength every 3rd watering. Any suggestions drop me a line! Happy Gardening!
Processing
Likes
14
Share
@Reforced
Follow
// Didn't even have air filtration set up until about 4 days ago, the results have been amazing. Also realized that the water I was mixing my elite nutrients with initally was too high of dosage, so I watered all of them yesterday with the correct amount of nutes and now they're growing like crazy! Topped all of the plants yesterday as well. (11-21-17). // Switched my 600w topshelflight LED to flower mode and changed the light cycle from 18-12 to 12-12. Plan on flushing out all the plants with plain water phed at 6.8 soon but may not, we'll see. Either way plants looking way better then I ever expected them to be for my first time growing. Safe to say I'm hooked! (11-24-17) // Watered all of them yesterday (11-27); half with RO water & the rest with my nutes water. Starting to grow very quickly since I charged my LED to bloom setting! Tallest Black Domina is almost 17 in now. They seem to be adjusting nicely to the new 12-12 schedule.
Likes
12
Share
@Borberad
Follow
Woche 8 Sie ist wirklich fast. Das Blümchen streckt sich fröhlich, und die ersten Blüten haben sich bereits entwickelt. Beleuchtung weiterhin bei rund 36 DLI.
Likes
4
Share
Das Ende der wunderschönen Dark devil ( Grüner phäno)
Likes
6
Share
@BudeCo
Follow
Semana terminou com mais uma poda e defoliação, feito preventiva. Dia de aproveitar e guardar alguns clones. Uma flor de Industrial Plant x Girl Scout Cookies F2 que fiz em 2014, sementes germinam muito bem. Ótima flor com perfil aromático old school, Kush, bem terroso e com nota de coca cola. Leve picancia e nada doce.
Likes
3
Share
Dane, We all should help one another. Human beings are like that. We should live by each other’s happiness - not by each other’s misery. We don’t want to hate and despise one another, share the Joint. And mother earth is rich and can provide for everyone. We can Grow enough Happiness, In this paradise, there is room for everyone. We only exist to bring joy into the world and The way of life can be free and beautiful, but we have lost the way. Grow High and Give the world A smile. At the end we own nothing more then all our memories, lets make them amazing for everyone, nothing to lose only everything to win. for those who come after, right. A last kiss goodby, a second one, softer and long as a sign, that you are woth it. That Everyone worth, who loved and given. Enought Hippie Talk, now have a nice day and an even better grow, thx for watching by. ((From Seed 🌱 week report: how they glow
Likes
28
Share
@Doggy
Follow
The vegetative cycle ends, I started the 12/12 cycle. I gave them a foliar irrigation with a flora stimulant and I also stayed with a clone of Amnesia Haze. Work is coming during the flowering.
Likes
42
Share
@Prilyfe13
Follow
June 28, 2023 Day 50 Zkittlez One: Height: 24.5" DLI: 52 mol/m²/d Light Height: 22" Zkittlez Two: Height: 28.5" DLI: 55 mol/m²/d Light Height: 18" This week will focus on Zkittlez One and getting her thinned out properly. I hope to have that finished by the end of the week. I've also raised the light again to keep the distance at 22" above the canopy. It's also helping Zkittlez Two. As she is a 28.5" plant, she was definitely a bit too close to the light. The other plants in the tent may not have enough light from the higher light height. I'm not sure for good or bad. Zkittlez One has hit the 24" plus mark! She looks fantastic. I definitely need to thin out the foliage a bit. I'll wait for her to finish up. But I'll just pull a few here and there as needed. However, I don't expect much more stretch out of her. Maybe a couple more days? We shall see. Water looks great. The stacks coming off this lady are, IMO, fantastic. The whole canopy is covered in tops and shoots still reaching. Honestly, if she was alone in the tent, I'm pretty sure I could have trained her wall to wall. Alas, I have 3 other plants in there who also need light space. Lol. Zkittlez Two is also looking great! She's filling out a bit still and building up those buds. I have a bit of confusion with her top. The buds are very skinny at the top and get fatter in the mid range of the plant. Around where the side branches grew to. Happily, they match the height of Zkittlez One. Or just a bit lower. Grow System Environment: Temp: 74.6° RH: 62.3% (still super humid here) VPD: 1.07 kPa June 29, 2023 Zkittlez One This plant has been a beast the whole time. Now she is getting too big for the tent and way too big to accommodate 4 plants as I have in there now. The canopy is super deep and needs a good thinning out. Speaking of thinning out, I decided to remove the outer leaves to open more space for the other plants. I'll be doing this over the course of the next couple days. She also got a full reservoir refill today. Cleaned up the reservoir as well. Zkittlez Two This lady needs absolutely nothing. Just hanging out and showing me what I should be expecting for bud production out of Zkittlez One. Honestly, I think I need a bigger tent already. I've had this 3x3 for 3 grows and I'm discovering the disadvantage of a smaller tent. Plus the thing people seem to think is best is compact plant. I don't need mine compact. I can grow in my state without issues. The humidity is still super high. So far I haven't found a solution. I have 2 dehumidifiers in there. That didn't work at all. It's the main room the tent is in. It's super humid in there due to the weather. Tent door has been open for days. I'll ask what to do. Maybe someone has an idea. Update: So I was looking over Zkittlez One this afternoon and realized taking the tie downs out made the plant compact, but a bit too compact. So after some testing I figured out that I needed to tie down the lowest 4 branches to open up the center of the canopy. It worked WONDERS! The 4 branches along with all of the tops from each one spread out perfectly, completely opening up the whole canopy. She is seriously huge now. See pic. Just WOW I've also added a video to show her mass. Grow System Environment: Temp: 74.6° RH: 62.1% VPD: 1.08 kPa June 30, 2023 Zkittlez One is the boss of this grow. She'll need another watering tomorrow morning. I snipped off some outside leaves today. And a couple blocking bud sites and more tops. A quarter turn made a bit more room for the other plants in the tent. Well, except Zkittlez Two. She is in the way back almost engulfed by Zkittlez One. Zkittlez Two has some awesome bud production going on. She may need a watering soon as well. Anyway, the whole plant is covered as I thought it would be. The buds haven't even started to swell yet. It's just going to be that much bigger. Grow System Environment: Temp: 73.9° RH: 64.4% VPD: 1.01 kPa July 1, 2023 Zkittlez One looks absolutely amazing. Massive and still growing. She's nearly 30" wide. 24" deep. She is also 25.5" tall. I don't know if this is big for an autoflower, but I assume it is. It's the biggest I've ever grown. She doesn't need water yet, but at her rate, she may need another gallon tomorrow. I snipped off just a couple more leaves today, just opening air flow and bud sites. Zkittlez Two looks great as ever. I decided to finally pull some fan leaves. Just the main stem ones and a couple that was completely covering another branch or facing inward. She'll need a new reservoir tomorrow. My major concern is how much she is squished in the back. With the 4 plants in there and that one massive Zkittlez, the 2 vegging plants need all the light they can get, which puts this lady in the corner. I was honestly considering moving her to my dry Tent and popping the light back in there. Something else I noticed is the bud structure. They seem quite wispy maybe it's just how they form for now. But they are also really skinny. Especially the main cola. I'll have to keep an eye on that and see what I can do about it, if anything. Grow System Environment: Temp: 74.5° RH: 63.3% VPD: 1.06 kPa July 2, 2023 Zkittlez One is now officially in the flowering stage. I'd say 2 days ago, but now the buds are really forming. The top of the canopy reads out at an impressive 26.5" tall. 29" in diameter. More bud sites and tops that I'm willing to count. Just a lot. She's going to need more water first thing tomorrow. Maybe later this afternoon. She's super thirsty and that's a great thing. I've also managed to thin the whole plant out. Not a full defoliation, but a few leaves here and there for about a week. Now she looks near perfect. Zkittlez Two looks great! Still buried in the back and the buds are still pretty wispy. At least the ones up top. Lower bud production is fantastic! Big fat buds. I might have to drop the intensity very soon to save the main cola. She's definitely not as thirsty as Zkittlez One and I am still a bit concerned about that. She did however finish stretching at 29" tall. Grow System Environment: Temp: 73.5° RH: 62.2% VPD: 1.05 kPa July 3, 2023 I dropped the light intensity down from 90% to 80% last night. Zkittlez One was drooping about 4 hours before lights out. I read somewhere that too much light can cause that. So we shall see how it looks tonight. Zkittlez One needs more trimming I think. She looks great, but she has an 18" deep canopy and I'd rather give light to the whole thing. The top 5" are fine, but below that is a thick floor of foliage. I trimmed some of it away today, it I'm gonna need to continue for a bit. At least some for next 2 weeks. Every other day. Healthy is an understatement with this plant. She is really tall with the whole setup with bottom reservoir. 40" from floor to top. Impressive. Zkittlez Two is so stuffed in the wall, I feel bad. I might have to take her out and put her in my dry tent with a 100 watt light. That is still up for debate. It's an extra 100 watts of power I'd be using. However, the extra space will certainly give the whole plant more light coverage and produce better buds I think. I'm going to try and maneuver them in the current tent and see what I can do. Update: So Zkittlez Two was really squished in the corner. So I removed one of the smaller plants and moved Zkittlez Two diagonally to Zkittlez One. I also got to pull the 4 main side branches out for better light penetration. Grow System Environment: Temp: 74.2° RH: 62.7% VPD: 1.07 kPa July 4, 2023 Zkittlez One is still growing a bit I think. The grow light is only 18.5" above the canopy now. Where it should be at 22" I'll have to see what I can do. Doing great on water and healthy as ever. I did start a bit of pruning. The popcorn buds on the bottom of the canopy. I'm not cutting the longer branches though. I feel like that might cause more stress. But I'm going to pull off popcorn buds for the rest of next week and of course remove fan leaves as needed. Every leaf is super healthy, just in the way of air flow and light. Zkittlez Two is much better in the front of the tent diagonal from her sister plant. Much more space. And with the side branches pulled out, I expect to see much better bud development. She's still a slow drinker, but I'm starting to think it's the humidity that's preventing her from drinking more. This is an entire week or more of humidity and lack of the right equipment. So I'm really hoping I don't end up with bud rot or mold. I don't think I'll get mold because of the air circulation. But bud rot later on is very possible. Maybe not probable though. I don't know. I don't have much experience with it, so yah. Either way, the grow tent door will be kept open to keep the humidity at a kind of reasonable level. Grow System Environment: Temp: 73.6° RH: 65.9% VPD: 0.95 kPa
Likes
35
Share
Venga familia que ya viene la cosecha de estas Cereal Milk de RoyalQueenSeeds, que ganas que tenia ya de darles machetazo. No veas que pinta que tienen estas plantas. Las flores aparte de prietas se ven bien resinosas, con 70 dias de floración. a sido una genética con la que disfruté mucho cultivarla, es resistente , y no es para nada complicado cultivarla por lo menos en interior. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Hasta aquí es todo , espero que lo disfrutéis, buenos humos 💨💨.
Likes
4
Share
Not ideal drying temperatures as summer has begun. Starting the dry at 27c and 52% humidity. I will keep a close eye on the drying process as hot temps could dry it a bit quicker
Likes
7
Share
Black widow clones have been growing both male and female parts had to cut sooner than expected had younger flowering plants near and didn’t want to pollen my other plants but it happened what to do might cut those next don’t want seeds in my buds I will grow against have one more seed left
Likes
38
Share
@Aedaone
Follow
The plants have slowed their uptake of water. That combined with cooler temps have reduce to watering to a few gallons a day. I've included my end of generative 3 phase nutrient formula for this week. They are all close to generative 4 so I'll be watching for the upper leaves to fade to see if they will need to be fed. All of the plants were given tap water on day 1. Day 2 of this week everyone received the nutrient formula listed @2 gallons per pot. Day 3-7 this week just tap water. Plants are feeding lite and there's plenty of nutrient built up in the soil.
Likes
121
Share
💩Holy Crap Growmies We Are Back💩 Code Name FBT2307 Well growmies we are at 21 days in and everything is going great 👌 👉 Started to do some light low stress training and its looking good 👈 We got , some Pre-flower showing already 👌Let the stretch begin 💪 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈
Likes
23
Share
167 grams for 2 plants. went 9 weeks, Had a bit budrot in one of the phenos at week 10. Very easy to grow, not a big stretcher imo. Maybe double it size. Havee a gassy pheno and a fruity pheno. If you look for a outstanding indica with extra on the taste e and smell and a heavy hitter...search no further
Likes
130
Share
@squalino
Follow
​✂️ : Déroulement de la Culture, Coupe et Séchage au #Dryrocket ​Note globale : 10/10 sans hésiter ! C'est la deuxième variété que je teste chez Growers Choice et je suis vraiment plus que satisfait du résultat. ​Retour sur le run ​Le cycle de cette plante a démarré sur les chapeaux de roue avec une croissance ultra-rapide et un stretch impressionnant. Ma principale difficulté au début a été de gérer sa grandeur fulgurante et le déploiement massif de ses innombrables branches secondaires. Le tronc principal s'est transformé en une véritable usine à branches (ce qu'on remarque bien sur la photo de la structure nue ​Malgré le fait que j'aie eu un peu de mal à la canaliser dans l'espace de la tente, et malgré quelques petites erreurs minimes de ma part, la plante a été d'une tolérance incroyable. Elle ne m'en a pas tenu rigueur une seule seconde et m'a récompensé avec des têtes bien dodues, compactes et remplies de résine. Côté arômes, elle dégage une odeur citronnée et sucrée vraiment divine et super agréable.. ​La séance de manucure ​La récolte et le nettoyage ont demandé une sacrée dose de patience : 8 heures de coupe intensives pour parer ces 487 grammes de fleurs et enlever toutes les petites feuilles. Un travail de titan, mais le résultat en valait la peine. ​Place au séchage intelligent ​Pour l'étape cruciale du séchage, les têtes ont rejoint la tente de séchage avec leurs feuilles, et c'est le Dryrocket qui prend le relais. ​Je commence à beaucoup mieux maîtriser l'appareil, qui tourne actuellement à plein régime. C'est un outil vraiment sympa et intuitif : ​Il affiche en temps réel la température et l'humidité de la tente. ​Il s'efforce de stabiliser et de réguler l'humidité cible à 62% (le taux parfait pour un séchage et un curing optimaux). ​L'indicateur "FAN" sur l'écran montre le moteur de l'appareil en fonctionnement et indique précisément à quel pourcentage de sa puissance il tourne. ​Enfin, le boîtier indique le temps restant de séchage et prévient lorsque l'ensemble est parfaitement stabilisé et prêt. ​C'est parti pour l'essai en conditions réelles, voyons ce que ce petit bijou de technologie nous réserve pour le résultat final ! ​Un grand merci à tous d'avoir suivi les aventures de "Bee Happy" ! à @DryRocket pour l'essai du Dryrocket On se retrouve très vite pour le smoke test et le verdict de pesée à sec après son passage au Dryrocket ! merci ❤️❤️
Likes
62
Share
@Roberts
Follow
I am dropping a Do-si-Dos auto from Zamnesia seeds. I lightly scuffed both ends, and dropped it in a glass of water.in 24 to 48 hours when it starts a tap root. I will then drop it in rockwool, and dome till sprout. 🤞🏻 for a great grow. Thank you Medic Grow, and Zamnesia seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
14
Share
From the floor to the top bud site these girls are sitting at 4ft (18days into flower) I took just ander 30 cuttings from this grow 2 weeks ago (half gorrila and half psyk) and kept only 6 psychosis clones for a new diary starting soon 😉😎 The remaining clones went to New homes.
Likes
9
Share
Lot's more growth! It appears the stretch has mostly stopped. I put my zkittles on a platform to get it more in line with the canopy. The green crack/alaskan diesel really stretched. I have been pruning dying leaves and removed all of the LST. Letting the plants do their thing now that height has been controlled. It's looking like the zkittles will be my first strain available for harvest. Got my humidity down to around 40% after it drys out from watering. Still have a fan blowing air into the tent, and have been rotating the plants too for more even light/ to limit the risk of bud rot. Probably too many plants in my small space. Also noticed the light has always been at 24/0 as I never switched the timer on. Oh well!