When attempting to bend the main cola on the Gorilla with plastic clips (never again), it snapped and hung on just the tiniest thread, so I involuntarily had to remove it completely, thus topping it, which I never intended. The plant does not seem to mind at all and the side branches started lifting up as if trying to take over and compensate. So far, Northern Light is the biggest mystery for me - the leaves look strange and it has the slowest growth of all. Even the Purolematic, which started last and was the smallest turned out to grow bigger. I also added 2 fans to help circulate the air inside.

Flowering Day 19 Since time chance To 12 / 12 h . Hey guys :-) She grows great . Today everything below was cleaned and defoliated :-) . A lot was removed because this time it was quite cramped in the tent and you don't lose your energy in the lowest shoots :-) . This week it was poured twice with 1.2 l each. You flowers are developing beautifully 💚 Everything was checked and it looks like all trips are slowly but surely gone :-) have fun and stay healthy 🙏🏻💚 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : www.Zamnesia.com Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany

Can the person who told me it was male have be mistaken? Could this just have been a late bloomer? Or am I just getting my hopes up, what are your thoughts?

Awesome Week💚 Following some great discussions with more experienced growers, I really think we got things back on track! 🙏 To those Growmies I really raised the ppm this week we topped out around 630 PPM This was in an attempt to balance out some nutrition issues. I think the ladies have responded very well. 😃🌱💪 Raised the light up to 24in as well a few days later after seeing positive changes due to feeding regiment. Started preflowering, showing pistols on all plants. Counting down these last 7-8 weeks when the ladies beauty comes out 🤩 Will update throughout the week with photos and videos. Happy Growing! 🤙💚💪🌱😎🌱💪💚🤙

Week 13 and they're looking fantastic! The buds have really filled out, trichome coverage is impressive, and the plants still look healthy and happy. At this stage it's all about letting them finish properly and maximizing quality. Last week of using fertilizer.

He estado de viaje hoy vuelvo y veo mi niña ya empezando floración como dios manda esperemos que está mamba salga re bombastic

She is looking nice and frosty. A touch nutrient deprived— so I gave some dry amendments. I was out of town this week, but know there were a few very hot days! She’s doing great!

These ladies are beautiful starting to show signs of their pistols and all of them so it will be flowering very soon by the next 2 weeks or so. Cutting back the big fan leaves for more light and airflow as she reaches more to the sky 💚🌱🌿

Hey folks! ✌️ I was sick for a whole week and skipped last week's update, but I've got some exciting things to share with you now. At the time of this post, we're on day 53 of flowering. While I was down with a fever, the plants suffered a bit due to drying out. The big one was hit the hardest. As soon as I started feeling better, I watered them, but the big plant experienced some gnarly salt buildup. Both plants were emergency flushed, and now the situation is more than good. During this time, the male plants were actively producing pollen, which I collected. I've decided that I have enough pollen for future experiments, so today I culled the males to ease the workload. In my small tent, the LSD auto by Barney's Farm is flowering. I might pollinate one branch to see what happens. The big plant is struggling with the weight of its branches, knocking its neighbors' heads (it even broke off some male branches!). I've tied the heavy branches to wire supports attached to the main stem. Now I can clearly see the seeds forming and maturing. I'll keep the plants until the seeds start dropping onto the floor. The plants have fully recovered and are feeling great. For nutrients, I'm using AB at 40ml per 5l with an PPM of 1695 and pH of 6.1. I'm giving around 10 liters to the big one and 3-4 liters to the small one. And now, I invite you to admire this beauty. Take care, my friends! Sending you all my love ❤️❤️❤️

Colling soon

5/12/2024 these plants just keep on getting fluffier and fluffier. Did a slight defoliation. The plant I did training on, seems to have better stackage than her sister. If lst doesn’t increase yield, then it at the very least will increase bud size/stacking. 5/19 end of the week, they're starting to pack on weight now. Pistils are turning a super bright orange color that has a pink tint to it that is super beautiful. The camera does not do it justice at all. I would definitely recommend this strain to anyone. It's stupid easy to grow and the buds are just getting ridiculous. You could probably drop like 9 of these in 3 gal pots in 3x3 tent and just water and basic notes and do a sea of green style. Watch the humidity though.

los esquejes enraizaron rapido a los 9 dias ya tenian raices y el dia 10 fueon transplantados

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

So she was a breeze to grow took to training like a champ fimd her early and did bowl training on her till around 2nd week in flower then removed the ties she would have been even better without the issues I had fed her daily on the wwf regime aiming for 30% runoff this seems to work really well on autos and get big yields of them trimming her was easy did wet trim then hung to dry for 6days at 65/60 with a small fan circulating the air then in a tub for 3 days burping buds are nice and tight loaded with thc and smelling awesome really happy with how things turned out thanks to all my followers and friends grow share learn what were all about happy growing guys

She is now coming into preflower and loving the new T5's. She is growing nice and bushy with future tops shooting for the stars. The stretch is definitely near. She will continue to be tied down and has been pruned and defoliated as needed to give her that sexy shape i want her to have in flower. Her terpines are beginning to be noticeable and is of lemons, earthy notes, and loud gas. She is now also getting kelp extract added to the nutes. She is growing very nicely and i could not be happier at the moment. So far OSSC has my attention as their phenotypes have been very nice.

She is felling well after topping. Se esta recuperando mejor de lo esperado My wife topped her plant last day third week. plants looks good and we walking ahead MI mujer se ha hecho topping en ultimo momento del tercera semana. entramos bien en la quarta

102.5g dry, top nug 13.3gs dry. Absolute beast of a plant especially as a freebie, had a good bit of fun with this one and it’s nice seeing improvement through each plant.

Heute (01.04) noch mal entlaubt und alle Triebe auf gleiche Höhe gebracht bei der Mango. Die bloody skunk holt auf und ist aber direkt nach dem Topping in die Blüte gegangen. Bin gespannt! 04.04- paar Blätter entfernt 06.04 - LST und paar Blätter weg!