Processing
Likes
52
Share
Day 37 - Hitting the ladies with a little LST. My cloner project took a bit of a backseat to life, so I'm a little late in the game to top these babies.... So I decided I'm going to do something I have never done before.... Let these plants grow naturally. Yeah, you read that right, I've never let a plant just grow out without some sort of fun training technique. Even my very first grow was riddled with aggressive plant shaping. This time will be different! This time I will be just doing some very basic LST to open up their branches to more light. I went in and stripped some of the inner growth sites that would have produced nothing but popcorn buds being so hidden from light. I then created anchor points around the grow bags by pushing toothpicks through the holes in the mesh. I like this because it gives me the ability to easily move around anchor points by simply sliding out the toothpicks and moving them where I please. I got the idea from seeing someone else use pushpins once, but I didn't have any on hand. And so, the toothpick hypothesis was born, and so far its working very well! Both ladies look much happier now that they're getting more light to their branches. The leaves on these Blazin' Skywalker plants are just so effing fat that they've been doing a solid job at blocking light to the branches. I tried doing some leaf tucking early on, but the branches just weren't quite long enough for me to properly tuck the leaves behind them and would constantly come un-tucked. I think we've found our happy place. 😊 Thanks for hanging with me, growmies! I hope y'all have a crazygonuts awesome day! ✌️💜🌱 Day 41 - Watered Maz with some 6.5 pH water. She had gotten a bit over watered so I let her go a few extra days between watering. The next morning, she let me know I did the right thing. 💜
Likes
5
Share
Plein de trichs mademoiselle a pris un coups de froid volontaire.
Likes
1
Share
@Raddawg
Follow
Leaves are fading already.. a little too many yellow leaves.. still trying to figure that out.. buds look and smell fantastic tho! Increased nutrients/ppm this week
Likes
18
Share
4000 ml jeden 2 tag pH-Wert: 6 EC-Wert: 1 Temperatur: 22ºC Luftfeuchtigkeit 62% Schädlingsbekämpfung: Mikroorganismen und Raubmilben PPFD: 200 µmol/m²/s DLI: Düngemittel: mineralischer Dünger NPK 10-4-7 Besonderheiten: wir versuchen bei diesem Grow Effektive Mikroorganismen aus. Die Opfer Linsen sind wieder da 😜 -Tag 93 Heute wieder mit Wasser und Mikroorganismen gegossen, jetzt sieht sie wieder gesund aus 😍 Wir haben sie auch wieder entlaubt um Schimmel zu vermeiden. -Tag 95 Heute erhielt sie 4 l Wasser, versetzt mit 2,5 ml Calmag und 6,5 ml NPK 10-4-7. Der EC-Wert lag bei 1,020 mS/cm und der pH-Wert bei 5,9 😇 -Tag 97 Heute haben wir sie mit 4000 ml Wasser gegossen, angereichert mit 3,5 ml Calmag, 7,5 ml NPK 10-4-7, 10 ml HY-PRO Rootstimulator sowie 0,64 ml HY-PRO Generator. Der EC-Wert betrug 960 mS/cm und der pH-Wert lag bei 5,9 😍
Processing
Likes
16
Share
Blue dream. Je poznat ze o proti OG ztrácí tsk týden což je pořad super. Moc se těším až s ni začnu LST. JE to skvělá odrůda od Humbol. ❤️🌞
Likes
5
Share
@db003
Follow
time for a watering update of my top shelf elite genetics autoflower testers of black valium autos and ancient haze autos in this watering I gave them emerald harvest nutrients I used the nutes at half strength of the recommended dose the water was ph. to 5.8 I made 3 gallons and split it between all the plants I did not use all of it just enough to get some run off I took the excess run off out with a turkey baster Cali Pro A and B at 2.5ml per gallon emerald goddess at 3ml per gallon honey chome at 2ml per gallon root wizard at 7.5 per gallon I also gave some Cheshire grin liquid worm castings to only 2 of the 4 autos they got 90ml to the base of the plant these plants are in day #25 from sprout
Processing
Likes
21
Share
Likes
7
Share
I have harvested the plants as of day 79, I would have let it go longer but I noticed a small section of bud rot on one of the main colas. Diary will be updated once it is dried+cured so I can actually fill out the "harvest" section. Still seems like mostly clear trichomes as of day 78, I don't think I am gonna let it go over 85 days The back one is really chunking up, but is kind of lacking on the trichome production, at least on the very tops. And oh man did these plants have their share of issues. From Ph swings, temp swings, and underfeeding(I think so at least), broken branches, transplanting, being too close to the light, and they look like they are going to yield pretty well irregardless of all that.
Likes
23
Share
Day 66 day 21 of flower. Front right is do sweet dos. Lights 12/12/ par 900/ co2 500 ppm/ temp 22-27 night 19-21/ organic soil/ technaflora nute/ water ppm 1400 ph 6.5/ 4L per plant Week three of flower is done power went out so I kept the light cycle going with a flashlight lol. This strain was described as little potent popcorn nugs and that’s exactly what they look like. Also included a video of my setup! Looks like there gonna be juicy
Likes
10
Share
day 44 - The growth process continues unabated. I am waiting for the desired size. 8 days after flowering it didn't grow as much as I thought it would, so we went back to the growing season. 👽 day 49 - I decided not to cut the leaves anymore after much defoliation. It easily tolerates strong stress easy to grow.
Likes
7
Share
@Xaboo
Follow
new week started. she is stretching to the sky. CU
Processing
Likes
33
Share
@cojastym
Follow
floweeer start day 104 change fertilizer from nettle to chicken manure, from my free run chicken yard
Likes
14
Share
Final Report: Grow: The plants has grown very beautiful and healty without pests and diseases. They grown bushy and with medium height during the vegetative stage. I had try to use LST in third veg week but i did't made correctly and after that i dicided to return to grown normally without any particolar tecnique. I used a littel more fertilizer then mine usual and that made the plants grown fast without any problem. In the first two weeks of flowering stage the plants started grow taller and the number of the branches increase, in this phase i only defoliated when the fan leaves turn yellow in late stage. Form the start to the end the flowers grown dense and bigger every day and this time i waited until almost all of them were mature before harvest the plants. I changed the plants from one grow room to another(in the sixth week) when they became too high and they couldn't stay more in the smaller grow box(nothing changed in the enviroment between the two boxes). Equipment and grow box: The enviorment of grow box has been optimized every stage with the right temperature, umidity and air flow. Vegetative temp/umidity --> 23-29 °C/45-55% Flowering temp/umidity --> 20-26 °C/40-50% The air flow was created by two pc fans and one big fan. Harvest: This time i harvest a big numeber of beautifull dense buds and i just discarde only few fluffy buds in the lower branches. The result of this grow is amezing compared to my old expiriences. I harvested the flower and i made a fast curing process after i washed the crop and i let them to dry with a fan on it. After five days a take the branches which were to dry and i did the final trimmig before put all the harvest in a open jar for finishing to dry. I collected all the leaves, fluffy buds and trimming scraps in a bag and i let them dry. Later i put the bag in the freezer and when i collect and dried all the scraps from OG Kush and Dandoverde Haze i did some Ice-O-Lator hash. I used 250g of trimming stuff and i made 11.50 g of hash, I had use a set of 5 bag and i take the resin from the 160µ - 120µ - 73µ- 25µ bags. I pressed all the resin in a great block of tasty strong hash. Always better every time 😊💪 Total harvest ---> 90g only of dense buds and 11.50g of hash.
Likes
15
Share
3/4/2021 3rd Node Appearing 3/7/2021 3rd Node Complete 3/10/2021 4th Node Spreading its leaves 3/13/2021 5th Node Spreading its leaves Plant seems to be loving the Mars Hydro TS1000. I raised the light a few inches as this is a very stout plant and I wanted a little more stretch between nodes before topping. Otherwise, we should be topping this plant middle of next week.
Likes
33
Share
@Roberts
Follow
Cali crasher is doing good. She has grown into the nutrition that was a little strong. She got her roots pruned again. She will be up for further training comming soon. She is really liking the Solux 350 from Hortibloom. Thank you Hortibloom, and Doctor's Choice. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
4
Share
Eccoci qui... Tutto va per il meglio, questa settimana ho eseguito Lollipopping e Defoliation per far si che le cime principali sprigionino al meglio il loro vigore. Siamo verso la fine del progetto ora bisogna solo aspettare la fine... Grazie a tutti per il supporto🔥🌲❤️
Likes
9
Share
Processing
Likes
4
Share
Solid week this week! Perfected the LST technique I think! All the canopies are comin in even, and they are growing great! I did notice the plant on the right that is under the King Plus 1000, it’s growing a little shorter and stalkier than its sisters. I tried to find a Mars Hydro reflector 48 to fit into the spot the king is in. I’m trying to match the reflector 144 I have in place, but I was unable to find one ( they don’t make them anymore). Well last night I was able to find one so this tent will be running perfect just in time for flower! Going to keep vegging them, and taking care of my babies! Not too sure how much room I have left to keep vegging, might switch over to flower on week 6 we shall see! Stay growing my friends!
Likes
41
Share
Welcome to My Synthetic + Organic Auto Cinderella Jack Diary. Thanks to Dutch-Passion for supplying my with great seeds to enter this contest. Much appreciated. Into the last week of this grow. Both plants have eaten up and completely finished and nice and ripe. And another few days. I'll harvest these pretty ladies. Again, it seems my Synthetic nutrients, isn't working just yet. But I know I'll get there. Really happy with the organic. Huge cola and side cola, not the biggest of plants, but grown very quickly and the amount of frost is nothing to scoff at. I'm very happy with the results. These are some of my 1st autos I've not topped. They do make for a much nicer shape. But, I just can't say for sure, if topping, (done right) is a better thing to do for some autos.. I'm hoping the quality and thc will be there. As there was no stress, other than the Synthetic pigment mutation that wouldn't of caused much harm to her. The buds/colas are just a 1/5 of the size. But, they are far from larfy and airy. Some pretty nice dense sticky nugs to look forward to from the Synthetic and big ass colas from the organic, best of both worlds. I done some light defoliation to make sure everything ripens up in this last push. But, looking throughout everything is past the 30% amber trichs and everything is 95%+ cloudy. Am going to leave them for the next week. I'll add pics and add another week for my harvest, and after I've tested and tried I'll give a G/W, much appreciated. Thanks for tuning in.