Likes
Comments
Share
@DevilsBud
Follow
New week for the 3th grow It's getting along very nicely must say one is looking better then the other and it's mix bags of sizes to worry about but other then that no troublesome issues what so every Next week going to lower the nutrients and be going into overdrive for next 2 weeks and probably be flushing some after 3 weeks Happy growings Growmies 🤜🏻 🤛🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
1
Share
@TTerpz
Follow
Start of week 3 (flower) 8/16/25 Fed with nutrients: 8/15/25
Processing
Likes
11
Share
start the second week of flowering ... continue to gain weight visibly, the branches becoming thicker and begin to glimpse the first glasses ..... let's go
Processing
Likes
10
Share
@GrowerGaz
Follow
Just water and calmag, then I have them a KNF soil soak . Some light defoliation.
Likes
14
Share
@Terpyboyz
Follow
So this grow came to a finshed but I had a. Few issues that’s held me up from finishing up the diary, but in due time I will reupload it all in order soon. But over all I will also update with a final weigh in of each strain produced so stay tuned 🤙🏻🔥
Processing
Likes
6
Share
Just got a new 600w mh/hps light for now it’s in my current setup with my 250 n it’s dimmed to 50%, only reason I mention is b/c the plants seem to be loving it!! They’re 12 days old from seed, still just ph’d water for them! So far so good :P
Likes
43
Share
Martedì 20/02/2024 Inizio controllo 2027 ec 5.5 ph Cambiamo soluzione e iniziamo con i nuovo dosaggi da prefioritura Aggiungiamo 75 lt demineralizzata Base 285 ec 7 ph Aggiungiamo i nutrienti per 80 lt 160 grow 160 micro 120 bloom 90 sensizym 90 calmag 90 rhino skin 90 bud candy Otteniamo 2146 ec 6.3 ph Aumentino al 100% la nostra mars hydro fc6500 e la teniamo a 30 cm di distanza.
Likes
27
Share
Week 11 for Kalini Asia by Zamnesia seeds, Shes looking just prefect where she is right now. Im thinking 2 more weeks and she will be more than ready to flip to flower. Would just like her to get a little bit wider so light can get to the lowers too.
Likes
58
Share
@AsNoriu
Follow
Day 8. From this attemt all 3 made it, but two plants look weakish, from other 2 only 1 seed is out. Not a fantastic start ;) maybe they will catch up later ! Installed tent, light dimmed to 30% of 240W, distance approx 40 cm. Happy Growing !!!
Likes
25
Share
FAT BANANA 🍌 AUTO / RQS WEEK #13 OVERALL WEEK #8 FLOWER This week was the last week for this lady been flushing her to get her ready for harvest. She's looking good buds covered with trichomes she's smelling fierce 😉 makes your mouth water. Thank you for stopping by and taking a look it's much appreciated!! Thank you RQS!! FAT BANANA 🍌 AUTO / RQS
Processing
Likes
5
Share
Likes
16
Share
Flowering day 65 since clock change to 12/12 Hey guys :-) . It's so far, the lady is ripe and will be cut at the bottom end in the coming days and hung upside down in the drying tent :-) . Next week there will be an extra update on how they are hanging. Watering would be done twice this week with 1 l each (nutrients see table above) Otherwise it was checked and everything was cleaned. Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.ripperseeds.com/en/feminized/kmintz-feminized-cannabis-seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Likes
6
Share
This one was Baked in Paris by PerfectTreeSeeds, grown with AptusPlantTech only! Check the other weeks to see the ones with GreenPlanetNutrients! Great gassy notes, awesome structure, beautiful colours. I know this one came out a little too early, but I was having problems with humidity and also with smell so I decided to take 'em all out at the same time. Forgot to take pictures of her on the drying screen, will update soon (:
Likes
5
Share
10 weeks from seed to harvest. The nutrient line I was using didn’t give me optimal growth, for this strain and my level of experience. Had some great growth and veg time, about 4 weeks, but when flower kicked in they got beastly. I would say I had two different phenos of this strain, and the one pheno that is unique, had slightly looser buds than the other two. This could be because of the LST/super cropping of the main cola. The other two had nice rock hard frosty buds and have similar smells and profile. The other one has more citrus, and was a bit lanky, more sativa in looks. Overall, easy enough to grow, no major surprises, and decent enough yield for 10 weeks. This is a strain that could have been better had I not had some issues with either lockout/deficiencies.
Likes
13
Share
Partially drained the tank at the start of the week and topped up with ro water and 1ml of final solution per Litre. Last 2.5 days were in darkness. I trimmed the majority of fan leaves before hanging up to dry in the tent today. Started out trimming with the plants in the tent and soon realised it would be much easier to just cut them down whole, hang them upside down outside the tent and trim them up a bit. I have a small dehumidifier and a small fan heater setup in the tent and they have been keeping a humidity level of about 60% and a temp of 16 Celsius for the last few days while the lights have been off. I figure that's a good starting point for drying and I can increase the temperature if needed, that will drop the humidity also. Intake fan at the bottom and extract fan at the top are running constantly as they have been since the grow started (low power 4" fans). I might add back in a fan for circulation depending on how the drying goes, or maybe even trim or hang the plants better to get more airflow around the buds
Likes
12
Share
She's doing so well not doing much but feed her and got her a wee defold.
Likes
41
Share
@Growing88
Follow
Ripenes plant and deafling for penetration light pop corn buds,trichome is milky,wait other 2 week for harvest day
Likes
34
Share
На этой недели решил чутка перейти к крайним мерам, пришлось удалить короткие и кучнистые ветви на которые попадало чень мало света, посмотрим как пересёт такой стресс, всё идёт замечательно)
Likes
24
Share
@rucucu94
Follow
Esta fue una semana de mucha lluvia y humedad, se la ve bien sin signos de hongos en persona se ve un engorde significativo en esta semana. Nos falta reparar la malla sombra que se hizo un hueco en el medio y tambien nos falta hacerle supercroping ya que las puntas de mas arriba siguen recibiendo un poco de luz durante la noche