26/6 -Temp 25-27day/22-24night -52%RH (2+-) 27/6 Water day* plain water 6.1 PH -Temp 25-27day/22-24night -52%RH (2+-) *** Had a humidity peak because of a thunder storm 60-70RH for under 24 hours 28/6 -Temp 25-27day/22-24night -52%RH (2+-) 29/6 Water day* Gave it a bit extra since im leaving a couple of days -Temp 25-27day/22-24night -52%RH (2+-) 30/6 -Temp 25-27day/22-24night -51%RH (2+-) 1/7 -Temp 25-27day/22-24night -51%RH (2+-) 2/7 -Temp 25-27day/22-24night -51%RH (2+-) I was away from them 29/6 - 2/7, but i gave them early water before leaving which lasted :) When i came home they had grown beautifully and was looking healhy. I could moniter the humidity through my Inkbird humidity controller.

Week 3 Flower (Bloom Week 3) – Daily Tasks Evening (Lights On) Check environment (temp 24–27°C, RH 55–60%). Inspect leaves and buds for pests, mold, or deficiencies. Water/feed (depending on medium): balanced bloom nutrients with slightly higher P and K. Ensure good airflow (oscillating fans). Adjust plant training (light defoliation if leaves block bud sites). Check for early signs of stretch finishing. Evening (Before Lights Off) Ensure irrigation is not too late in the cycle to avoid wet medium during dark period. 👉 In Week 3 bloom, the plants are finishing their stretch and starting to put more energy into forming bud sites. Main job is: Setting Scrog net 2layers ,Control environment (VPD, airflow) ,Support the plant with bloom nutrients.

its day 35 since sproud and the plant looks good so far. I removed some leaves and started training her with that bending clips to make the branches stronger. I collected leave mold from the surrounding woods. a lot of white fungy hopefully usefull mycoriza.

Posting the phenos when I do them

Let’s Go Day 52 of 🌺!! At 101 days old , these girls are looking an smelling oh so amazing! 2 of the Pre 98 Bubbas and both Dirtyblondes started getting flush on Saturday, so they will continue flush the rest of the time for 12 days an they will be ready for 48 hrs of darkness. While the 2 other Pr 98 Bubbas will remain on same feeding through rest of this week a most likely start getting flush by next week!! Hope you all enjoy an have an amazing productive day as well as great holiday weekend, happy holidays keep them eyes peeled for next weeks updates , Cheers y’all 😶‍🌫️💨💨💨💨💨🤙🏻

12/01/2021 FIMed all plants a second time, and also FIMed the tips of the other main branches of all plants. They will get another dose of Recharge with their next feeding tomorrow. I will give them exactly one week to recover from this FIMing, and will flip these plants to a 12/12 light flowering schedule. These girls are supposed to have a flower period of about 45 days, but I am expecting to have to run them about 50 days or so. My goal is to get over 8 ounces of nice bud on this run. 12/02/2021 I fed two gallons of water with the nutrients listed above. 12/05/2021 I gave all the girls a second major defoliation. I plan to switch to 12/12 flower cycle this Tuesday evening. 12/06/2021 I removed a few leaves and fed two gallons of water with the nutrients listed above. These girls are doing excellent. They have responded very well to the major defoliation that they received. I will flip them to the 12/12 flower cycle in a day or two I believe. I uploaded a couple of pictures of the strains I plan to grow in the future, which is mostly Humboldt Seed Company genetics

Começou a crescer rapidamente. O formato ficou estranho, eu realmente não sei manipular o LST. Até consegui que os ramos inferiores esticassem e ficassem mais cheios, mas é muito difícil segurar o ápice principal. Resolvi amarrar ele pra baixo logo depois dessas fotos. Vai fazer com que ela fique ainda mais densa, ramificada, mas pelo menos dar um respiro na altura. Ela tá crescendo rápido, todo dia preciso recuar um pouco o LED. O cheiro começou a exalar e está bem bom. Acho que em breve preciso reforçar o adubo com algo rico em fósforo e potássio.

It's been a beautiful plant to grow, I thought she was gonna be a little bigger, however she has produced an amazing quality flowers, very sticky, terpy and stinky, the citric aroma it's absolutely wonderful just because of that I could grow her again and again. You definitely need to try this strain if you lovd weed.💚🌱🤤

I make topping and this is the day after topping so they look growing nice. The next 2 days I will change them to bigger pot I already prepared so let’s gooooooo Growing guyssss

Día 22. El estirón ha frenado. Las plantas están empezando a llenarse de flores. Se me hace extraño tener las plantas con esta forma, dado que siempre he usado cortes y LST. Se ven bastante bien, aunque cada vez que las miro, me dan ganas de cortarle alguna otra rama. Pero no quisiera mermar el rendimiento. Ya a esta altura sería más.contraproducente que otra cosa. Pero creo que debí haber sacado más ramas de las que saqué. Día 24. Fui un iluso al pensar que el crecimiento había frenado. Hoy ya las plantas tienen 5 cm más que hace dos días. Voy a tener que doblarlas si siguen a este ritmo. Tuve que hacer un video, ya que no tengo lugar para sacar fotos en contra picado. Veo que se están llenando de flores y empiezo a imaginar el resultado final. Día 26. Las plantas crecieron otros 5 cm en estos dos días. Ya estan 65 cm. Me empieza a preocupar, por lo que supongo que voy a tener que doblarlas un poco. Seguramente solamente doble las dos mas altas cruzadas entre si. Vengo ilusionado, pero sospecho que van a ser necesarias entre 7 y 8 semanas. Tuve que agregar solución, ya que había bajado mucho el nivel del depósito, y agregué un poco de bud blood. Voy a seguir usándolo hasta el momento del PK. Seguiré actualizando.

sooooo... I have now harvested the plants and they looks so pretty 😍😌 I'm really proud of myself to have produced such THICC BUDS!!! 😅😍 and the smell is so awsome 😵 this strain is a 11 from 10 👌 a realy big Thanks to Royal Queen Seeds for this 2 awsome strains 💪 A detailed rating comes after drying with a detailed score board 😄

Happy Birthday 🎂 🎉 🎈 🎁 🎊!!!! So here we are with what i'm hoping to be an award winning seedling lol ... thank you Zamnesia Seeds and Plagron for putting this contest together!! I am very excited for this one. As you can tell, she got her very own personal home.. With her parents breeders name on the front!! So high hopes for this girl, she is in a Zamnesia 2.9 gallon fabric pot ( I recommend 👌 ) and if all goes, well, she is going to have some sexy stinky nugs for all to see and for me to smoke lol .. hope everyone has a good time with this contest.God bless and happy growing ✌️. P.S i added Plagron to my nutrient list so I could answer the contest, but this plant will not see those nutrients until the fourth week of flower.. Bread and Butters is the man for dropping that knowledge on me.. Y'all should check him out... https://www.zamnesia.com/us/35-cannabis-seeds/368-zamnesia-seeds

7/28/19 --Super happy to see the plants doing this well. Ive found that every other day feeding is the best for these specific plants. Im a big proponent of only watering the plant when it signals it is ready for watering. The least possible amount of induced stress for these plants is the goal for me. Cheese seemed to be totally unaware of the FIM that was done on it, as it showed not even 1 sign of stress post FIM. Cream cookies is another story, she's quite sensitive to absolutely everything--including watering. I am super happy to see that the last fan leave on the 5th node has 9 leaves--a really good sign that the plant is doing extremely well. The more leave nodes on each leave the healthier than plant. There are zero signs of nutrient burn at all. It was difficult at first to see if the slight bending of the leaves was due to nutrient burn, but I later figured out that the leaves were pressing against the side of their pot and as a result bending--wasnt nutrient burn. Ive been varying the pH widely each week--with the attempt to be as random as possible. I want to make as many nutrients available to the plant as absolutely possible. I really am loving the Advanced Nutrients Sensi line. Im growing in coco but I bought the nutrient mix not designed for coco with the understanding there might be some potassium issues down the road. But otherwise as a chemist by profession, when I heard about the pH perfect line I was rightly skeptical. It will balance your solution to the correct pH range (5.6-6) IF you start with dead neutral pH 7.00±0.05 water with no dissolved salts (distilled water). the distilled water I've been buying (from Walmart) clocks in on the pH meter at around 7.6-8.6 which will cause the pH perfect technology to neutralize some of the dissolved ionic species and bring the pH well below safe range for cannabis. Ive found that if you pH the distilled water to 7.00--add your Ca/Mg/Fe, THEN add the pH perfect technology the range will be much more suitable. It was kind of annoying since my pH down is so much more concentrated than my pH up. Me problems I know but still annoying. --One of my amazing collages at work is going to water both babies today with Week 4 nutrient solution even though we are technically in week 5. My vacation has prevented me from mixing the solution to feed. --This vacation has brought so many new automation ideas to coco coir growing. Ive been developing a hypothesis that involves what I call the "level of droop age" and its correlation to plant thirst. It began when I was growing in soil and needed a better way of telling when to feed the plants instead of a fixed schedule, which seemed to be giving way too much water to the plants. ---Ive developed a "droop scale" which can be directly correlated to plant thirst. Ive also found that very happy plants that do not want water will go through a natural droop cycle as night approaches. I take this as the plants time to grow out its root system (happens at night). By the morning the leaves are pointing up in what I call "leaves up loving life" ---So the scale I've developed is kind of arbitrary but it does a really good job imo if you become very familiar with your plants. ---The scale ranges from -10 (the most droop in the leaves every observed) to +10 (the most extreme leaves up loving life ever observed). the scale is out of 10 not 20. ---lets say that you watered your plants today, and their leaves were at a -7/10 droop (what when I water my plants). If you water them you should observe no increase in droop--in other words after watering the droop should only improve not regress. If the droop increases after watering your plants wanted a little more time before their feed--so alter your droop scale until you find the level of droop that when feed causes only an increase in the droop. 6 hours after watering you plant droop should be >+1/10. The next day you should see your plants at least at +5/10 droop. ---Merging this scale with automation is going to be difficult as ill have to use an open source machine learning AI to learn when the plants droop is sufficient enough to justify a watering. I hope to set up the system to be automated or manually operated over the cloud. ---Using a Raspberry pi and an Arduino as well as a whole set of motor control boards and sensor boards I hope to put together an integrated system that can detect when the leave droop reaches critical levels using a camera, and feed accordingly. Ive been all over the internet and all automated grow projects rely on soil moisture sensors which only penetrate <4 inches into the substrate. This doesn't cut it for me as the root ball of the plant is way below that 4 inches of the sensor, yielding readings which only pertain to the top layer of soil, which just so happens to dry out the fastest. ---Im going to keep my grows at 2 plants each from no on--and I plan to make an automated system for both plants which can control watering to both plants individually. Im currently trying to figure out the best way to track volume of water dispensed. A flow meter with a know diameter tubing and a known diaphragm pump rate seems to introduce all sorts of inaccuracies into the mix. I think im going to design an automated measuring system that uses an ultrasonic distance sensor coupled with a camera and AI to fill up a the hopper to the desired volume of nutrient solution. ---I have all the hardware listed but im a complete dumbass when it comes to coding. My profession is chemistry, coding goes right over my head. I have an immense respect for coders as I honestly have no idea how you guys do it. Its like learning 15 different languages at once and using them all together. Blows my the ability of our society. The wide range of skills. Love it. ---If anybody would like to help me code this project it would be greatly appreciated. 7/30/19 -Cream Cookies is doing extremely well. FIM was a great idea. 4 new main cola sites came out of the FIM which im very happy about. The undergrowth also has caught up to the canopy. the canopy has a plethora of bud sites. Defoliation done to increase light to bottom branches. Largest fan leaves towards the canopy removed. FIM'ed leaves that opened up also trimmed, allowing more light to penetrate to those small bud sites. --Ive counted sites where main colas can form. Very happy with this HST I decided to do. --LST done and branches separated from each other so they can receive ample light. Thinking of adding supplementary 40W flowering bulbs for flowering. -Cheese FIM didn't work as intended but it did break the symmetry of the plant. One of the first branches has grown higher than the canopy and I had to tie it down using LST. Did some defoliation and going to do some LST later. --Some light stress spots on Cheese, makes sense since I wasn't physically at my apartment to raise the lamp. Before raising the lamp the plants were 14 inches from the light which is way too close. The closest it should be is 17 inches. Raised the lamp to 18 inches and spots are subsiding. --Being overly cautious ive increased the dose of Ca/Mg/Fe to 4 mL/gal incase spots are actually a Ca/Mg/Fe deficiency from explosive growth. 7/31/19 -Cream Cookies is showing beautiful pre flowers. Still recovering from light stress. Looks very similar to nutrient burn but only present in tip most growth suggesting light burn. 14 inches was way too close-vacation problems lmfao -defoliation done on both cheese and cream cookies to expose bud sites -LST done on both cheese and cream cookies to bring bud sites into the light -both plants fed 400 mL Week 5 nutrient solution-when I mix next weeks nutrient solution im going to reduce the concentration to 12mL/gal w/ 3mL/gal Ca/Mg/Fe. --I want to precent any nutrient burn plus plants are slightly stressed from defoliation and light burn from my vacation. -lamp raised to 19 inches to help aid in stress relief -plants are responding in a weird way to the watering. Not in a bad way-but in a different way--larger lower leaves are not drooping like in the past its just the much newer growth is drooping. Makes sense since newer growth has less developed support system. Makes me feel much better about my watering schedule. --Clawing which I suspected was due to light stress is getting better-especially after a feeding. 8/1/19 --Calcium deficiency just barely showing on midlevel fan leaves. Good thing calcium is a mobile nutrient. Going to readjust the nutrient solution ph to be 6.2-6.3. Been accidentally locking out calcium. --Defoliation done on both plants to expose more bud sites and to thin out the thick canopy so light can penetrate below. The hope is to defoliate correctly. If done right I won't have to lollipop. --Cheese has no preflowers yet--still in veg --Cream cookies looks like it started flowering. 2 preflowers were spotted earlier in the week. Surprised to see how fast the plant moved into flowering. Going to be feeding it with flower nutrients starting week 6. --Going to continue feeding cheese with veg solution until preflowers are observed.

Hey everyone 😃. Day 14 since time change to 12/12. During the week they started to form their buds, which is why I will add 2 g of GHSC Powder Feeding Bio Bloom per liter of substrate over the next few days 😃👍. The next few days I will also make some free space so that the energy doesn't end up in mini buds :-). I wish you all a lot of fun with the update and a great week 🍀👌 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Breite erreicht nun in die Höhe.