5

Purpeling...much appreciated from Mr. Pipi ...yesterday i threw some icecubes on her soil for her to sip on through the night. Gimme dem Pörpel Buds ecco 29.03.2024 Day 115 Mr. Pipi chopped off one Branch(13,6g wet). Since April 1st gonna be a date to celebrate for Germany, Mr. Pipi wants to do so with some early Harvest. Just because I can. 😄😄 And around 3-7 Days the rest of the plant will be ready, hopefully. Mr. Pipi feels like its over 50% Milky and the amber ones are a bit rare. But we are close my friends. So Let´s all be happy and welcome the german growers officially🙌🙌 I tried to take sweet shots of the branch, but Mr. Pipi is amateur. and the branch was curved 😵. But i hope you enjoy.

98 days from seed :) the girl looks really great:) her flowers are getting bigger every day :)!!!!! Those purple leaves look Very pretty:) this is my first purple lady:) the girl drinks 4 liters of 6.3 ph water every 3 days:) good luck to everyone.

A temperatura está bastante alta, estou ligando as luzes à noite e desligando durante o dia, mesmo assim a temperatura média está em 31 graus. Fiz aplicação de magnésio na White widow #2 mas ela não mostra sinais de estar se recuperando. As C99xBB estão perfeitamente adaptadas a temperatura alta e estão se desenvolvendo muito bem, as duas são bastante parecidas e estão começando a liberar um aroma idêntico ao da pitomba (uma fruta tropical) e também sinto um cheiro muito presente e pitanga.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

420Fastbuds FBT2305 Week 1 Week 1 of the start of veg for these 2 FBT2305 plants. So far I've switched to 18/6 light cycle and keep a 75'f day temp with a 65'f night time Temps. I give them 500ml of straight well water every other day. I did to a pm spray and didn't realize my lights would be coming on as soon as they did. Lesson learned it'll burn the leafs. 😆 All in all Happy Growing

I’m in love with this plant! Beautiful huge colas, awesome color, terps are like sour cherry candy and gas it’s ridiculous how good this plant smells! Harvest is gonna be sickkkkkk.

Hermosa planta 😍

The lady's are 8 weeks old now and ready for flower🌺 i might switch em next week so stay tuned

Nous sommes 18 septembre les plants sont déplacer dans la tentes 120x120 elle s adapte du sp 150 a sodium 400w j espère pas trop de stress elle ont été soumis déjà en vegetation sa devrait aller légère surfertilisation le ph 7.5 8 je vais probablement rincer les plants je doit vérifier euphoria tous les jours pour le sexe du plants les autos je vais voir l état elle doivent brunir légèrement les pistils avoir dans le temps

Sad she was ready to be chopped, but excited as hell too! 😁 I have another seed and Im already fighting the temptation to do her again! 🤣🤤 Cant wait to smoke! 💨 Ty for the 💚

Welcome to week 3F of growfessor theatre, 4x4 edition. The ladies are looking happy and healthy. Do-si-dos received a heavy defoliation, there were a ton of small inner branches starved for light, so they got cut. LSD, Green Crack and Mandarin dreams all received a light defo, yellowing leaves were removed. Lighting provided by Mars-Hydro TSW2000. Thanks for stopping by, tune in next week growfessors for the next episode 👽🌳💚

Keep on moving. 420 Siempre y con el Dios Jah En el comando. Abrazos

Have got the soil good ph i am pretty sure. I have got good growth out of the last week and few inches and some fan leafs and they look just barley burned and they are way happy standing up so I am thinking (fingers crossed) that I have got it under control. Going to do a trim and take some clones in the next week. Then a train for a couple weeks and put her in in flower tent get used to that light and flower her see what I get. Still just doing declorinated water at 6.5 let the soil do her job. Stay tuned

They look good, the gurl in the back her flowers are gettin very nice!! 😍🤩🙏 I turn them 180° every 2 days 🙏 The one in front looks allmost ready... She´s lookin sharp, rocket to be launched... ❤️❤️ very thin plant, small harvest, small plant Sexy ladies!! ❤️❤️ she smells like berries and cream 😋😍 Gettin frosty...

Germination date 🌱 28/11/2021 Day 91 09/03/2022 Strain 🍁 Solfire Gardens Bahama Bussdown (Runtz x Bahama Mama) THC% • Unknown 💡 Mars Hydro FC-E6500 • Power draw 650W + 5% • Max coverage 5 x 5 • LED 3978 pcs high quality chips • Max Yield 2.5g / watt • Noise level 0 DB • Removable Driver & Light bars • Daisy chain • Fast cool system https://marshydroled.co.uk/ 🇬🇧 PROMO CODE • (organicnature420) DISCOUNT https://www.mars-hydro.com/ 🇺🇲 PROMO CODE • (ORG420) DISCOUNT 👍🏻 ⛺ Mars Hydro 150 x 150 x 200cm 📤📥 AC infinity 6inch 💧 10lt dehumidifier ❄️ 3.1kw air con system 💉 Nutrients Living soil (dry amendments) Grow Bloom Bloom2 MycoBoost Barley 🌱 Growing Media • Soil 💡 80% Notes 📝 It's not been a good week. Had some family time last week and unfortunately caught covid with all the symptoms. I've been bed bound since Monday and today I'm starting to feel slighty better. Not asking for sympathy 🤣 but this explains why some of my girls have switched on me... Looks like all 3 Frosted Biscotti have gone into reveg. Obviously have a light leak but think I've sorted it now. The mystery is just well under feed as I've run out of Bloom and big Buds and its also gone into reveg. The other coco ones haven't gone into reveg and almost look done. Biscotti Mintz and Bahama Bussdown look 🔥 well impressed. The mutant Biscotti Mintz (soil) has come along nicely and looks amazing. I don't get why that hasn't revegged as its surrounded buy the others that have. The 2 at the back, (Bahama Bussdown) ones taken a slight knock and revegged and the other one has just got to heavy and collapsed. Again looks near enough done so now need to think of a plan of action for curing as tent will be occupied for at least another month. So I think that's it with the problems 🤣 .. Apologies again for not getting back to anyones dairys over the last 2weeks. I'm going to spend the weekend catching up with you all and sorting out the tent as long as I'm covid clear. My partner has been doing so much for my son and I I couldn't ask her to maintain the tent aswell. She did give them a water but no nutrients 🙈 half effort still wins my heart ❤️ Discount codes in bio for Mars hydro

Today marks the start of the final week before harvest, and I’ve officially begun flushing the plant. It's really exciting to see how far it has come. The buds have developed beautifully, and the scent is amazing – super fruity and sweet, almost like a mix of berries and tropical fruit. The aroma fills the space every time I check on it. I’m pretty satisfied with how the plant has grown overall. The structure is solid, and the buds are dense and sticky. Everything looks on track for a good yield, and I can’t wait to see the final product after curing. Fingers crossed for a smooth finish!

I feel like I'm doing something wrong when it comes to the end of flowering. I've seen harvests with nice green leaves but for some reason my leaves are always yellowing and burnt by the last couple of weeks. I usually just chalk this up to harvesting time fade/fall coloring but I wonder if it's something I don't have right in my nutrients. Either way I only have about a week or 2 left of feeding, im going to implement Liquid Koolbloom the last week of feeding. The last 2 weeks of these girls I'll flush with just ph balanced water. Day 60 should be around January 8th which is my expected Harvest date so this will be my "New Year Harvest". Needless to say, I'm super excited! P.S. I added in another layer of netting to help support the really heavy buds forming. They feel super solid and thick as well as extremely sticky

During week 7(bloom) like corona lock down wasn't enough we had major weather change. Temp dropped significantly and humidity levels increased to 70%(outdoors RH). As far this goes on it is necessary to use a strong dehumidifier inside tent for half an hour every 2 hours as once the lights are off the humidity climbs 65%+ without it. Feed remained the same. GG# 1 looks like most of its pistils are orange so in the end of the week I ll have a look with the microscope and might start flushing it.