Starting the week off very healthy. Only change is the adjustment of light height and the removal of Mass Pro. I’m seeing very rapid growth both vertically and horizontally. Plants are showing signs of pre-FLOWER, light intensity was moved up to 80% with a max 700 PPFD. So far so good. All plants are happy and healthy…

Going to let the plant dry hanging for a few days and then trim, I've never tried a dry or dry-ish trim, so it'll be a good experience. Will update in two weeks with dry weight and initial smoke test. Hang drying took longer then wet trim and drying in my rack, but the smell and taste of this strain is mind blowing! 11/10!

Start of week 8! 2 more weeks according to the breeder, but if i had to guess I would say 10 or 11 weeks. I absolutely love the way this strain smells, like gym socks but in a good way.

Great week , transplanted from 4.5 inch pots to 5 gallon pots. Plants have grown a lot in during last few days. Waiting to start LST .

Finally did the last topping and achieved the shape i wanted so much! Can see the "H" on top, this gonna serve as base for the next following branches. quite symmetrical.

So it's week 3 of vege and it's looking good so far. Small plant big Leafs. Last week i did some topping ON her and she Looks good 💪🏽 the Future will Show US what will Happen next. Still Happy to grow it. 😄 I'm hoping for a purple Pheno 😄🙏

Greetings This week I switched to 12/12, switched to the base for flowering

One more heavy defoliation to close out the end of week 3. shes really starting to bud up now, and the tent gets filled with that sweet, sweet smell. Shes looking healthy and showing speedy progress. Watering stays 6L, around 6PH, 5ml/L Bloom and 1ml/L Green sensation started with the last watering.

Wachsen und wachsen und wachsen… Was soll ich groß von Woche zu Woche dazu sagen..?

31/8/21 Day 29 #1 Ph 5.7 E.C 1.0 #2 Ph 5.7 E.C 1.0 #3 Ph 5.7 E.C 1.0 3/9/21 Day 32 #1 Ph 5.7 E.C 0.9 #2 Ph 5.7 E.C 1.0 #3 Ph 5.7 E.C 1.0 5/9/21 Day Day 34 #1 Ph 5.7 E.C 1.2 #2 Ph 5.7 E.C 1.0 #3 Ph 5.7 E.C 1.0 6/9/21 Day 35 #1 Ph 5.7 E.C 0.9 #2 Ph 5.7 E.C 1.0 #3 Ph 5.7 E.C 1.0

Was a pretty smooth week for most the girls. Showing some steady growth. I topped all of the plants around day 12 other than the slurricane 7. Ph got a little high since the nutrient level was too low to buffer it at the beginning of the week. Slurricane 7 and sugar cane are the ones that took some damage. I think they will be ok though. I upped the nutrients to 1/4 tsp per gallon and the ph has held stable since then. Should be able to start some training the middle of next week and looks like we might be going 2 more weeks on veg before flipping them to flower depending on how this upcoming week goes. Guess you will have to show up next week to find out...

Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.

Pics range from Day 14 to Day 21. Two very distinct phenos of the GLP. One coming in very purple early on and the other must hold distinct visual familiarities of her SFV OG. Will be top dressed with Gaia and EWC along with second application of Miicrobial Mass which has greatly aides in unlocking that Iron.

OMG the smells are becoming so intense, from lemon to the sweet caramel mix with chilies and a touch of pine trees, i think i cant put in words what im smelling and were is taking my mind, but i can tel this, what an amazing combination of fragrances that are flying around The tricomes are shouting up as they become fatter and frostier, all cristal clear so far, i think i still have 3 mb 4 more weeks to harvest, lets see 😜 Just calculate my VPD and it’s 0.98 kPa need to increase this up to 1.2 for now s i’m moving my ligth up a bit and see if it works 🙏🤓🙏 Thank you all for following, comment, like and all 🙏 100 likes 😅🙏 🙌🙌🙌🙌🙌🙌🙌🙌 ❤️❤️❤️❤️ Loving this LED Tec 😍 Girls: 1-BlueBerry 2-Alaskan Purple 3-Poyote Gorilla 4-Hindu Kush 5-Whitw Mango 6-Super Glue 7-Badazz Cookies 8-S.A.D. tent -8x8 / 2.4x2.4 but i'm only using 1/2 so 4x4 / 1.2x1.2 Led - Lumatek 465w Compact Pro at 100% All i Grow is medicine for myself, Stay safe, stay tuned and B Happy Peace out D

Really nice that u check this page, its very much appreciated, thanks! If you leave a comment ill comment back and if u like my page ill like yours back This week all is in flowering and the flowers now quickly getting fat! Ive started with nutrition: Sea weed 15ml/10L P 8ml/10L Bloom 30ml/10L Molasse 20ml/10L Silicium 10ml/10L --------------Amnesia Haze------------ Amnesia Haze is a strain that is perfect for starting the day with a smile, thanks to its invigorating and stimulating effect and a feeling of physical and mental clarity. With genetics that go back to the indigenous breeds of South Asia and Jamaica. His rise is rapid and powerful. A revitalizing experience with earthy flavors and hints of lemon and citrus. Amnesia Haze cannabis seeds can be used for indoor and outdoor cultivation. These plants produce nice sturdy buds with a high THC percentage. Also suitable for medicinal use. Properties of Amnesia Haze cannabis seeds – Has a nice lemon and citrus flavor when smoked – These cannabis seeds are suitable for indoor and outdoor cultivation – Very good as medicinal cannabis – This is a strain with a high THC content – Gives you a powerful and high feeling Information Amnesia Haze cannabis seeds Flowering time: 10 weeks Genetics: Amnesia Haze 80% sativa, 20% indica Plant height outdoors: 150 – 200 cm Harvest month outdoors: from July to October Yield indoors: 550 – 650 gr / m² Yield outdoors: 200 – 900 gr / plant THC: 22% Link to the shop: https://seedsgenetics.nl/product/amnesia-haze-gefeminiseerd/

Day 70 - She's really getting frosty now! The smell is very sweet, like Icing Sugar. Amazing 😍 Only 1cm vertical growth this week, I think flowering stretch is over. Bud and trichome production is in full swing.

and next week of this lady. nothing special i just let her grow. all nutrients are in ger section if not other mentioned all by maufactures instrucktions.

7/5/25 plant is stretching. Not sure if its preflowering or just being outside in a bigger pot. Im just going to let her grow naturally and see how it turns out. I may end up with just one diary of each strain at the moment. But im also not sure whether im going to be doing indoor or outdoor based on personal circumstances.

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ TIMBER!! 🌱✂️🐱... We have 4 dry boxes packed like the one pictured.. there has to be close to 2lbs here!! Berry terpenes have invaded every floor of the house!! it's sooo heavenly 🙌.. we oven dried a small sample and she's potent, we'll update a smoke report and rough weight in about a week..thanks for dropping by and happy harvests everyone!!❤️🌱 ⚡Mars Hydro/FC-E6500⚡ Specifications ⚙️: 650 watt, full spectrum design, removable (and adjustable) light bars and driver 🔌 Diodes: BridgeLux chips (3978 count) Veg Coverage: 6x6 ft 🌱 Flowering Coverage: 5x5 ft 🌼 High-Efficiency PPFD: 1200umol/m²/s ☢️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_