Jus a reg day at work for dem girls.....did a lil soil building(top^) with reg feed and water....clones doing well add a lil kick start to the

Last Sunday I increased the nutes so that the ppm was on the higher level (600-625) as the feeding schedule showed. Dec 9th I started to see some lime green (video) leaves on new growth. The ppm would go up mostly & down slightly, but the lime green spread & eventually turned yellow (last pic from today). I did a water change the other day & lowered the ppm/nutes to around 575-580 range. I've been reading around that this might be a sulfur deficiency? Some suggested adding Cal-mag. Today I added 2 ml more of Cal-mag & snipped some of the darker fan leaves that had some damage. I ordered epsom salt, waiting for it to arrive (tomorrow). Any other suggestions/diagnoses are welcomed! 😊

Base nutrients were reduced and PK 13/14 increased. So far she seems to take the change well. The buds keep swelling and are already rock-hard.

All feeds with nutes use either a whole ratio or combination of "Veg Mix" and "Bloom Mix"concentrates DILUTED in water until a total ppm of add in is reached using a (Total Dissolved Solids)TDS Meter measured in PPM (parts per million). The "Veg Mix" concentrate will eventually be added in smaller ratios and "Bloom Mix" concentrate what will eventually replace the "Veg Mix" concentrate entirely with the ppm and ratios listed when I feed. Veg mix recipe is on week 3. Bloom Mix recipe is on week 5. Day 49 VPD is okay now - temps at 75F RH also now at 65% with ILVent at 50% = VPD of 1.04 - ppfd also same as yesterday mostly 480 to 490 around the ring with 510 and 520 in the center Took ph readings as well - 3 readings 6.43, 6.48, and 6.37 to avg 6.426 Which is good because she's starting to show signs of stress after the topping and defoliation from a couple days ago. The leaves are starting to curl at the tips and the bronze color stripping is happening again - however this time seems to be a slower progression so Im hoping that having the correct ph this time will help while she's re-routing her resources. I 'did notice also that the growth tips seem to be growing at a slower rate than before - I think she's at her limit in colas and the roots are having to find more space to spread, may even be too big for the 5 gallon pot. I have no plans to change her out just yet, but will monitor. Soil is drier today - so I will be watering tomorrow with de-chlorinated water at 6.4ph Day 50 VPD was good at 74/64 with the tent open while I feed that I left it open for a bit and took time in feeding and cleaning - after all that still good at 74F/61%RH/50%ILV ppfd was checked after water and setting back - same as yesterday as most of the newest growth is still coming from the new colas - most seem to be adjusting 1 at a time in each split but both are showing growth now on all cuts. Started feed by making new ph buffer solutions, calibrating/testing both meters. The have about a .15 variance between the two. Checked weight and made 1.5 gallons of feed. started at 228ppm added 450ppm veg and 150ppm bloom for a total of 833ppm feed/epsom salt - splashed h2o2 and ph'd to about 6.4- I fed via watering can and spray and fed the whole amount slowly since I was feeding until bottom drip and she took it all before starting to bottom drip. Afterwords I let her drain (about a quart came out) and checked ppm from runoff at 2500 (telling me she's okay but isnt eating as much as before her topping yet) ph is a mystery - I show 3 readings from top level of 6.62, 6.57, and 6.57 for an avg 6.586 but 2 separate readings from 2 meters (4 readings total) on the bottom runoff showed 5.3 and 5.6 then confirmed later. I expected a variance since the wood ash probably stuck to the top side of the soil - but I didnt expect that much of a difference. I will monitor but honestly dont know what I should do, if anything other than watch. made a video of the fan movements and runoff drip Day 51 What I am calling "stress burn" is progressing as expected. I am monitoring the ph from the top as I did before, but again, not much I can do other than over water, so I'll just watch for now and compare rate of spread until she fixes her resource pathways. It seemed to take about a week to clear up after the ash treatment last time, so I am on day 3 of 7 for now with no treatment. Looking for a spurt of new growth to show and then I'll know she's better. Adjusted the lights to accommodate a week 6 level of 500 to 600 ppfd - that means I can raise the lights to the top of the tent and increase power. So now set at 3 tick up and 37 inches from the soil or 26" from the plant top. Now her ppfd reads about 540 on both of the center colas and 500 to 510 on the surrounding ring. Adjusting lights meant I had to adjust the fans up to medium power and re-directed them to blow at the edges of the pot; made a video. VPD is steady, but still warmer than typical (only by a couple degrees nothing too much) 76F/61%RH/50%ILV for 1.15 kpa on room VPD Day 52 VPD is higher now that I have the lights to the top of my tent and the fans on the lights blowing down at the pot. I moved the IL Vent to the top sucking out with the motor and vent outside the tent now. I also opened two lower air holes with my heater set for fan on the opposite side of the tent than the vent. Currently, I am at a max of 1.2 room VPD and ranging down to 1.0 so I'll take it until it does something else. 74F/65% RH/75%ILV - I will monitor to ensure it's stable. ppfd is same as yesterday as there's little growth still. Spots are still progressing on the oldest leaves at the same rate as before - however the newest leaves are not showing signs yet, so I will continue to monitor. Day 53 ppfd was a little changed today, showing that there's growth coming back now. lowest on outer ring was 500 with most at 520 and 530 highest, center colas were tested at 540 and 560ppfd. VPD was stable as I watched it most of the day since I made changes yesterday. Temps were 74 to 76 and RH was 61% to 68%. ILV was set to 33% with the bottom heater on fan to draw in air. lockout continues on the oldest fan leaves at the last top nodes. New growth is already marked in a couple of spots. I have about 6 gallons of tap water burning off chlorine now and will use about 2 gallons to flush at 8ph. I plan to dunk this weekend with feed so this will allow time to dry out and hopefully reset the ph and lower my ppm readings at the lower part of the pot before then. Day 54 Took Control pics measured VPD and ppfd Lights are at the top of the tent and second tick from highest power level. Lights to soil is 37 inches and lights to plant is 12 inches shorter so 25 inches leaves to light. currently ranging 530 to 550 around the ring and 575/580 ppfd at center (after feed and replaced). Moving the lights (day 51) made the tent hotter so I changed my ILVent to suck out at the top and fresh air in at the bottom - I have been fighting to keep temps under 78 managed to hit 74 to 75 with the heater being set just to fan for the bottom air vents- I did also raise humidity to a setting of 65% a day before moving the lights, so Im hitting 61 to 68% between power cycles on the humidifier. Overall Tent VPD is 1.0 to 1.2 as max. Took controls for feed. Weight 16lbs 11oz. tested and calibrated 2 meters and took 4 ph readings of 6.55, 6.77, 6.53, 6.85 to avg 6.675. from top of soil (last runoff measured 5.6 and 5.3 on two meters) prepared 2 gallons of feed at 500 ppm over tap. (burned chlorine off overnight) starting ppm was 217 - added 75/25 veg/bloom ratio. ph balanced to 7.8 and 7.63 on separate meters (rinsed and retested to be sure got 7.79 and 7.63 again) I used 4 knitting needles in the soil about 3 inches from the plant center. Poured feed water over the needles until it pooled slightly on top of the soil, I then pulled the needle out a little to allow the water to drain into the holes better. I did this in 8 different spots. As soon as she started dripping water from the bottom I poured a little on the leaves and then moved the plant to another drip pan to finish pouring the rest over the top of the soil without dripping any over the sides. Took videos of the drip and waited 10 min before putting her on another clean drip pan and back in the tent. Runoff from second drip pan was measured twice at 5.8ph and 2410 ppm - and first pan 5.85 and 2670ppm (expected higher ppm since I moved perlite on the bottom with the needles) Defoliated the oldest leaves before lights out. Day 55 She mostly looks like she appreciated the clippings and ph balance from yesterday - slower progression of the lockout issue and largest new growth since topping day. So speaking of new growth, I plan to use LST in the next few days to set these colas in what will hopefully be their last bind around the ring. VPD is steady at 75F to 77F and RH is between 63 and 68%. My ILV have been set to 33% and the lower fan blowing rather than heat. top soil ph was measured with 3 readings, on a tested and calibrated meter. 6.47, 6.7, 7.12 to avg 6.763 (kinda wild in those readings so I double checked them all twice and got the same in each hole)

Accidently added week 3 too early. I'll wait a little longer to add the 4th week to even it out. The plants are doing somewhat good but not great. The yellow one is restoring to a fuller green. It seems they all have a little heat stress though and they're not growing as fast as I'd like. If I compare it to my window grow, where my Fast Eddy CBD is just as old as the plants of my outdoor grow. Then Fast Eddy is a lot further. I think they're a bit stunted by the cold in the first week and a half and now it's quite hot for them. Will have to be patient to see how they recover. 8/6 Great growth :D especially on the companion plants. Too bad my plants seem to have some bug problems. I think it's leafhoppers. Especially the 2 x critical CBD are affected, but the sweet CBD that was more lightgreen also seems to be affected.

Great strain, would recommend. Nice smoke/vapor, friends love it, stupefying and euphoric, no heavy couch lock like heavy indicas. Taste great in The Mighty vaporizer, citrus with a hint of pine.

5/13 first week from transplanted clones, looking good, 5/18 transplanted 5 - 4” pots to 3 gal grow bags,

Welcome to the 5th week of my mutilated magic mango When i dropped one of my diy led's on the center of the plant, it looked like i was going to top it, it was nearly topped and the recovery from it took very much time. The amount of flowers is very low, but trichomes all over the place besides that i can feel the breath of the cops in my neck So i decided to cut a bud in advance, when i get caught i already have tasted what i have grown Only watering this week, leaves look very healthy, but a little bit dark to me, plant is happy though, leaves are upwards all the time. I forgot to mention, this autoflower gets 12 hours of light with white light, with a couple of other photoperiod plants, after those 12 hours i put it under smaller blurple light, it's a 12V 50W COB, driven at 25 watt for extra lighting, the last 2 weeks i have been doing this, untill i see it's nearly time to finish, then back to 12/12. The smell at week 3 of bloom was very fruity, it had the same smell as a good green mango, no difference. But since she matured, the smell changed to the "trichome"smell, same smell like any other "white weed" It has a kind of dark but light skunky smell too, which easily can be grown without filter if you don't grow many.

The cold is taking a toll, that’s for sure. Still looking decent but I’m sure I’ll get my fight with this one ________________________________________________________________________ Light from @MarsHydroLED 😎 FC-E6500🔥 730 Watt⚡️💥 2.85 μmol/J🔥 Full Spectrum 🌈 WiFi smart connection 😱 Tent: Mars Hydro 4x4 Light: Mars Hydro Smart FC-E6500 Exhaust fan : Mars Hydro 6”. Heating mat: Mars Hydro “48x20.75”

Im doing a bit of defoliation, moreover the leaves that covering the buds, i cut some small branches on the bot of the plants, to keep energy for the distal parts of the branches. Every 2 day approximately, to no stress a lot the plants, I pinch the apex of MD1, MD2 and BB1, that my secondary branches go up, until the height of the apex central. Nutriments : 2,0 mL/L of rhizotonic, 2,5 mL/L of cannazym every watering. 2,0 mL/L of terra vega every 2 or 3 watering in case of they need (N) until the final of the strecht (first 2 weeks of bloom). I will put 5L every watering (pots of 18L) and I will analysed the drain of every plants to check pH and the fertilizer amount. Im really proud of theses plants, they are strong, resistant (the trunks are huuuge, moreover the Moby dick from Dinafem) and so healthy !! The MD 3 has reacted really really good with the topping ! Im impressed and quite sure do topping next time ;) I hope they will give me the best of themselves !!!! Lets wait the final of the strecht 😉

Ich warte 10 -12 Tag für netto gram.

Week 3 (1-7 to 7-7) 1-7 Temps: 22.2 to 26 degrees Humidity: 50% to 70% 2-7 Temps: 22.2 to 25.2 degrees Humidity: 49% to 73% Watering: #1: 80 ml. #2: 77 ml. PH: 5.8 3-7 Temps: 21.8 to 25.3 degrees Humidity: 52% to 78% 4-7 Temps: 22.2 to 26 degrees Humidity: 36% to 64% 5-7 Temps: 19.7 to 24.5 degrees Humidity: 45% to 62% Watering: Both 1.5L I transplanted the girls in the early morning to 18L AutoPots. I use the airbases with an airdome, and a airstone connected to an airpump. As for the soil i use Plagron Coco-Perlite 70/30. After i transplanted them i moved them into the 100x100x180cm tent. The light is at 40% strength with a distance of 60 cm. Im happy they are finally transplanted into the AutoPots, My plan was to do this way sooner but i forgot to buy the root disks. So i had to wait till they arrived, and with the legalization in Germany there is a huge delivery time. 6-7 Temps: 18.8 to 25 degrees Humidity: 41% to 64% 7-7 Temps: 18.8 to 25.5 degrees Humidity: 44% to 57%

terminando la 2° semana y empezando a la 3° cumpliendose 21 dias pasamos a macetas de 1lt a 7lt y contiamos el crecimiento de estas cepas de rayalqueenseeds y utilizando un sistema de aumento de c02 abase de micelio , las plantas respondieron increible las raices EXPLOTARON ! tanto que colonizaron la maceta y la red baja y tuve que romper las macetas para salvar sus raices, increible crecimiento, - abonamos oganicamente y complementamos un mejor suelo mas vivo y el trasplante salio un exito ! y los resultados de el.. se ve en las fotos !

Hallo zusammen 🤙. Habe sie heute geerntet. Wir hören uns in 3 Wochen mit dem Erntebericht. Rabattcode für den BIOTABS-Webshop https://biotabs.nl/en/shop/ GDBT420, damit erhalten Sie 15 Prozent

Hello my friends 👨‍🌾👩‍🌾, This week was good, I've continue to train the plants, I've removed some leaf 🍃, Plant healthy with a sweet green and growing well 😊. The Vanilla and the Bisous Au Thc, have a similar size, looking good for the scrog, after the fat banana harvest. 💦 I give water each 2 or 3 days 350 ml/plant Water + rhizo + tera vega Water + Rhizo + canazym PH@6 Lamp is 100% Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Merry Christmas 🎅 🎄 and happy nice end year, See you next week Mars Hydro - TS 1000 https://www.mars-hydro.com/ts-1000-led-grow-light Mars Hydro - FC3000 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - SP3000 https://www.mars-hydro.com/sp-3000-samsung-lm301b-greenhouse-led-grow-light The High Chameleon - Vannila T https://www.thehighchameleon.com/shop/vanilla-t-5

Will post dry weights & more comments soon! Sorry for the lack of updates but Thanks for following & happy growing friends!✌️🏼🙏🏼🌱

Día 36. Estamos en 6ta semana. Los esquejes se atrasaron debido a que han sido días muy fríos y no he logrado enraizarlos. Decidí poner el extractor de aire junto con la bomba de aire, así solamente se prende 15 minutos cada hora. Así estoy logrando temperaturas mayores a 24°C en el indoor y así voy a lograr el enraizado. La planta ya tiene un tamaño que ocupa casi todo el indoor. Pero lo importante es que la voy guiando y ya estoy proyectando como va a ir cada rama. El tamaño va a exceder lo que esperaba, pero aún así creo que si logro lo que tengo en mente, voy a sacar muy buenos resultados. Igual no me voy a arriesgar demasiado, así que si contando 10 días desde ahora, no logro que los esquejes enraicen, voy a pasar la madre a floración sola. Cómo pueden ver, las ramas están bastante gruesas, y el la ramificaciones van ganando su lugar cada una. Las raíces son demasiado grandes, aunque sé que voy a poder poner la planta en el sistema de arriba igual, aunque me voy a tener que ayudar de algo para meterlas. Es importante no utilizar las manos, ya que se pueden transmitir muchos hongos. Voy a seguir actualizando e ir viendo que pasa. Pero ya estamos en los últimos días de crecimiento, haya o no esquejes. Incluso puede que ya pase la planta al indoor de arriba para darle mayor libertad de crecimiento. Esto me va a servir para tlmar en cuenta en la próxima camada que se vendrá. La idea de esto es hacer las cosas rápido, y no en gran tamaño. Pero siendo que ya estoy en el baile, no me queda otra que bailar. Día 40 Los esquejes no estaban enraizando, así que decidí cambiarlos de lugar y los puse arriba de la luz, donde les da calor y luz tenue. Espero que ahora si agarren. Y hoy fue el gran día, pasé la planta madre al módulo de arriba. Pero lo voy a dejar una semana más creciendo. De esa forma veo si los esquejes llegan a agarrar a tiempo. Y además tuve un problema en el trasplante. Primero que la planta se hizo más grande que lo esperado, y la raíz también. Cuando la pasé, hubo contacto de la raiz con prácticamente todo lo que había cerca. Sumado a que se enredó en el oxigenador, así que quedó una pidra difusora en la raíz. Dado el alto riesgo de haberla contaminado con algún hongo, le puse una solución de agua con agua oxigenada, recirculando continuamente, para lavar las raices y de paso bajar el stress de teansplante. Mañana veremos cómo arranca el día. En el aprendizaje me llevo que en la madre, es mejor hacer un corte en el primer nudo, o dejar las ramas del segundo y quitar las del primero. Y así que queden sólo dos ramas, para luego dejar a los esquejes en el medio. Eso planeo hacer con la próxima variedad. Entre tanto ahora sólo me preocupa que la raíz no se haya contaminado en el traspaso. Ya en 8 días estaré pasando a floración si no hay esquejes. Si llegan a agarrar, habrá que dar unos días de crecimiento hasta que alcancen a la madre en altura. Pero ya está todo en definición. Ahora sólo queda esperar y seguir guiando a la planta. Ya tengo ganas de poner la próxima, pero falta bastante para eso. Tengo 10 semanas de flora, así que recién en 5 semanas voy a poner la nueva madre.

Week 2 of veg captain future Start of new week everything is not so perfect but this bean was also germination later. I will be bumping up the nutrients and by end of the week will be transplanting to 8 L fabric pots. Posting pic of progress Tru the week see you next week 23/9/21 transplant complete mix some Easy Boost Organic Nutrition with my Plagron batmix work great last time also made video Happy growings Growmies thanks for popping by 🤘🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Fully marshydro supported Setup: Marshydro GT100X100X180 Marshydro Ts 1000 LED lamp soil :Plagron batmix Nutrients :Advanced Nutrients Advanced Nutrients pH Perfect Bloom Advanced Nutrients pH Perfect grow Advanced Nutrients pH Perfect micro Advanced Nutrients B-52 Advanced Nutrients Voodoo Juice Advanced Nutrients Rhino Skin Advanced Nutrients Big bud Advanced Nutrients Bud candy Advanced Nutrients Overdrive Advanced Nutrients flawless finish Advanced Nutrients Sensizym BioBizz - Calmag Mars Hydro tent handy info Lock All Light Inside: MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. Durability Grow Tent :Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. Easy Observation of your Plants: Special peek👀 window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. Removable Tray Keep Clean: The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof cleaning easy. Good Ventilation&Fast Assembly: Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter.