Likes
Comments
Share
Fattening and stacking! That’s what’s up 😎🔥 The girls are doing well, no issues other than the tip burn (went a little hard on the nutes then dialed it back) I was very busy this week and had minimal time for the garden, the automation is key for success! I really should look into an auto water system to complete the process, but I love the time I spend and watering is one of those times you can get up close and personal and really view your plant and how it is doing from top to bottom. Only about 3 weeks left give or take, I can’t wait. The terps coming from these plants have kicked it up a notch and are intense! Like walking through a pine forest… that also has weed growing 👃🤤🌲, lol. Started with the Bud Candy from Advanced nutrients for the Mag/Sulphur and to help with the terpenes and fattening. I had impressive results with my last GG Autoflower using this product in the last 3 weeks, hopefully we can get a similar result. 🤞
Processing
Likes
47
Share
Day 64 - I've been patiently waiting for the time to come, and it's finally here! Changed the lights over to 12/12 to send the tent into flower. Current light settings R99 W99 B50 as suggested by California Lightworks. I did a full reservoir change - switching over to bloom nutes. I also added some Si28 and P31 Microbes to the reservoir to test out this new product that I was fortunate enough to receive samples of. I've seen the results of others with crazy booming root growth.... Let's see what happens! Day 65 - I swear, it's like she's been waiting for me to flip the light cycle. I kicked one plant out of the tent so now there's even more room for improved air circulation and light distribution. This plant is a serious beast! Day 67/ Day 3 of Flower - Last massive round of defoliation before I sit back and let her do her thang. ✌️
Likes
2
Share
@iceveiled
Follow
Just Ph'd water for now until she shows signs of being hungry.
Likes
9
Share
@Justrite
Follow
The flush begins , Using final flush with water at 21.oC And some defoliating to get light down . Managing to keep temps stable at 23-25 oC with both lights Also added in a mars hydro light Last week and seems to be working well and shown good response from the plants under it
Processing
Likes
5
Share
@EKWCR
Follow
I will try again, i know that is not the full potential of the Crtical +
Likes
1
Share
@lalee
Follow
first time I grew Dutch passion, and it was orange bud auto. I love Sativa dominant strains, and this strain is now on my favorite list. First on my list is Amnezia haze auto, which is 70% Sativa dominant seedstockers and fastbud seeds. I love it. The second is chocolope DNA genetics feminized; this strain is really heavy and many thc. Three is orange bud auto from Dutch Passion, really nice buds, many thc, and long-lasting sativa effect. This strain really tells you that you are really high.
Likes
11
Share
@Krakt85
Follow
Iniziamo l'ultima settimana di vegetativa , dopo aver defogliato un pó le ragazze e piegato i rami più bassi sembra che vada tutto bene . Felice crescita e alla prossima settimana ;)
Likes
39
Share
March 11th. Seedling is showing up... wonderful It was a fast Seedling strong Growing Shes under a" open Dome" for more Humidity for the next Days She get Sprayed with " Fast Plants Spray" March 13th. Iam done with setting up Now i have another Babytent. and Inside the New Viparspectra XS-1000 and the other Stuff to run the Envoirement I already ca see a difference between both Tents. If you stand outside and just look with Eyesight the Viparspectra seems to be brighter// has another color of Light. I made a Unboxing Video for more informations. Amazon: http://url-9.cn/0y9i Amazon US: https://amzn.to/3e0P2bk Amazon CA: https://amzn.to/3bTnEJC Amazon discount Code: it10mlarimar XS1000 10% it15mlarimar XS1500 5% it20mlarimar XS2000 5% it40mlarimar XS4000 5%
Likes
10
Share
Likes
3
Share
2nd week began with small problems that progressed but we decided to replace them with a solution and connected another air pump new pump for four channels, 160 liters of air per hour
Likes
10
Share
@SgtDoofy
Follow
2/13: The LST is really starting to help fill in the spaces on Trainwreck, which is starting to really look bushy. Amnesia 3's LST is much easier and is giving me a more space between leaves to get access to the stems. They've started to smell fragrant over the weekend. The tomatoes that share the tent handled my quarter-strength nutrient mix very well, so I feel safe using it on these plants as well. I've turned up Amnesia 3's light to 75% to see if I can get the plant to fill out more, similar to the bushiness of Trainwreck. 2/15: Trainwreck's leaves are pointing down a bit, so I'm watering until I see some runoff, maybe a gallon or so. With the sheer amount of bushiness, I've been able to defoliate a few big original fan leaves that have been hanging out in the shade at the bottom. I've increased the light to 75% and have raised a couple inches to help promote stretch and light penetration to the lower canopies. LST is going well on both, but better on the more lanky Amnesia 3. Both seem very happy. 2/16: Trainwreck took the watering well. I noticed Amnesias leaves were pointing a bit downwards, the pot was super light, so I went ahead and watered a gallon with light runoff. Noticed some twisted wind burnt leaves on Amnesia, so I'm repositioning the fans for a less direct flow. Going to need to LST Amnesia a bit more tonight, as the main budsite is quite a bit higher than the others. Otherwise, things are looking okay. Thinking of buying some molasses here soon to add to the water. 2/17: Minor defoliation of shaded leaves near the soil. Still tough to defoliate Trainwreck given how bushy she is. Tucking the big fan leaves on her as much as possible to prevent shading any of the budsites. Since they're in flowering phase, I think my next watering will be with a quarter strength of Bloom nutrients. Molasses included if I have it by then. Only $3 at Walmart, I better!
Likes
4
Share
I've been pulling the top fan leaves to stop the main stem growing any taller and repotted them into 4L pots, once they show roots I'll flip them over to flower. They've all outgrown their mutations but the apple fritter has a slight varigation.
Likes
18
Share
Likes
27
Share
Here we are at the moment of truth, the flowers are starting to form, our Ghost Train Haze reveals its sex and of course like all Zamnesia plants I will be the father of two beautiful females. One is growing straight but I will show it to you later because I have been focusing a lot on this one in main - lining. It is a plant with a wide internodal distance so we have more time to shape it before the woodification and it lends itself very well to late lst interventions. I managed to open it on the main line very well and the lateral branches are really, growing and stretching properly. We will not see the super productive trees of the autumn harvest but I am willing to bet that we will have lots of beauty and lots of resin in beautiful bush-sized plants. Wait for the uncle BreadandBuds.... We are still using soil, feeding and all the recommended additives from Plagron 100% organic. We have moved on to the flowering start schedule that keeps the same Power Roots additives - Sugar Royal, Pure Zym and adds the flowering stimulant dear in my house for obvious reasons of Biscotti. Of course the basic fertilizer is now Alga Bloom. The Green Sensation when the flowers are already a bit swollen, do not start immediately. The Power Buds must immediately stimulate the start and development of the buds. ---- Decide on the right soil and calculate your fertilizer schedule based on the soil on the official website. -- www.plagron.com Try a seed of this strain that drives us crazy.. ---- https://www.zamnesia.io/en/12511-zamnesia-seeds-ghost-train-haze-auto.html Zamnesia Description // From the day its cotyledons emerge from the substrate, Ghost Train Haze Auto will surprise you with its rapid growth and robustness. When it starts to flower, this short sativa will develop long and compact buds with pungent scents of spice, citrus and fuel. All the best that mother nature can offer is on ---- www.zamnesia.com
Likes
15
Share
@Uwish
Follow
Hello guys, Here I am again to present you a new run, still with the best leds of the market nevertheless as I changed my growing space from 120x120 to 150x150. So I had to update the material inside... I will run with 3 EVO 5-150 lamps of 320W or 960W with Bluetooth dimmers. For the Hydro system, it will be the V-SYSTEM from Alienhydroponics. In fertilizers I am always with Advanced Nutrients. I work with osmosis water. Currently, 4 clones took on 4. Once the roots are ready, I will transfer the cuttings from the propagator to the V-SYSTEM. ------------------------ since the 16/08, when I transplanted the plants in the RDWC system, I noticed some points that I will mention below and correct next time. 1. The cuttings are too small, allow enough time so that I can completely fill my pots with clay balls. 2. Cut out the bottom of the pots from the cuttings. 3. 3/4 of the cuttings are touching the water, so one is late. Next time when transplanting, add more water, up to the basket in order to immerse all the plants and not to create a difference between each one, consequence now I have 3 that are ready to explode and one that will struggle behind, problem corrected today by increasing the volume of water. 4. The b-52 is a real pain in the ass in RDWC, you have to clean the 2 filters almost every day, with this new soup I'm testing without and I think I'll continue like this just with the base sensi grow A and B, as I use Root rot X, I won't use voodoo juice since all the bacteria would be killed. 5. Use of Voodoo Juice is useless if using Root Rot X which will kill the bacteria. I don't know why but when I transplanted in the RDWC, I put my set up in growth mode, except that the plants were not ready for it, moreover, I made a FIM on each. So I lost some days, these last days I went back to a ppdf of 150, now that my roots touch the water, I declare growth 0 on 22/08, I will do between 21 and 28 days of growth. And as my roots are doing well and touching the water I'll go to a PPFD of 300 ++