FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 https://strivenutrients.com/ Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

I colori dell'autunno sono arrivati😂😜con i colori sono arrivati pure deliziosi profumi..deliziosa..a vedere qualche foto delle ultime, sembrerebbero pronte da tagliare,ma io preferisco che maturino un pochino in più. Voglio vedere più tricomi ambrati.cosi da renderla più sedativo possibile 😉😂🤣💪👍🕉️💚💛❤️

7 eme semaine tout se passe parfaitement bien, très peu de place quatre pieds J'ai comparé par rapport a d'autre 7eme semaine je pense être bon, aussi je vais changer d'engrais après cette cult pour GHE pas la jolie bouteille biobizz qui m'a avait été recommandé par culture indoor 11

Bonjour à tous les padawans et maîtres jedis Tout d'abord merci à @zami_official de zamnesia Seeds de me permettre de cultiver leurs fabuleuses génétiques ainsi que @Cellmax_Nutrients de me permettre de faire cette culture en m'offrant le substrat et l'engrais nécessaire à ce run. Cette souche sera ma première féminisée étant un jeune cultivateur (mars 2019) je voulais apprendre en cultivant des autofloraisons durant un an. Aujourd'hui nous y sommes enfin et pour ma première féminisée j'ai de grand projet, j'espère arriver à faire un main-lining de 32 buds et pour ce j'ai pas choisi une souche au hasard car j'ai opté pour la Bruce banner #3 de @zamnesia Je rappelle que je cultive par passion et que le rendement n'est pas ma priorité et que je n'utilise que le strict minimum du matériel nécessaire à une culture correcte au prix le plus bas possible MATÉRIEL CONFIGURATION Box 80×80×160 Lampe led Lampwin 300 watts ×2 Lampe COB led Macegrow 450 watts Ventilateur à pince 15 watts Xiaomi Deerma humidificateurs 5L Hygrometre thermomètre Extracteur PROFAN 107 m3/h - 100 Prise programmable électronique ×2 Pot 0.25 litre Pot 1 litre Pot 3 litres Pot 11 litres Pot 50 litres Cellmac nutriments Cellmax biobloom Cellmax biogrow Substrat cellmax bio ligthmix Fil de fer et pince coupante Microscope Petite balance de précision CULTURE ÉTAPE PAR ÉTAPE J'ai tout dabord fais tremper ma graine dans un petit verre d'eau pendant 12 heures dans le noir et je l'ai ensuite placé dans un Tupperware hermétiquement fermé entre de bouts de sopalin bien humidifié dans un endroit noir à environ 27 degrés celcus. Une fois la graine germé et d'une taille de 1 ou 2 centimètres je la prend délicatement et la dans un pot de 0.25l je recouvre de terre je tasse et arrose. Je place ma lampe led 300watts à environ 90 centimètres de la plantule avec un cycle de lumière de 24/24 pendant une semaine. Au début de la semaine 2 le cycle de lumière passera en 18/6 grace a un programmateur. Jour1: léger arrosage Jour2: léger arrosage eau ph 6.3 Jour3: léger arrosage Jour4: arrosage avec 10 centilitres d'eau ph 6.3 à laquelle j'ai ajouté 5 millilitres de cellmax rootbooster Jour5 arrosage

NOTES: This week I'm starting to flush with only water and Final Solution -nutrient, so emptying the tanks and refilling them as doing so. I'll try to keep the pH at around 5,8-6,2. Overall everything looks pretty good and I can't wait to harvest. 🙏 Day99 (23.1.) Took some pics and videos for the diary with my shitty camera. Day100 (24.1.) Emptying and refilling all nutrient tanks with fresh solution as mentioned above. Day101 (25.1.) Increased the dark-/night-time by 30min so now the lights are 11,5h On / 12,5 Off. Day102 (26.1.) Day103 (27.1.) Reducing 30min of light again so now my timer is set to 11h On / 13h Off. I also moved the lights a bit higher for the rest of the grow, about 10-15cm higher than before. Day104 (28.1.) Day105 (29.1.)

Aprendiendo cada día mas

Added yellow sticky fly traps to all cubes as a preventative measure to avoid infestation of fungus gnats. So far none have been spotted. Defoliated and did a little more LST to all the plants to open up the center and give more light to lower shoots. Blue Dream 3 and Chemdawg 3 started showing some discoloration on the leaves (yellowing around the veins) and also the leaf tips curling down. Did some research and came up with this... Possible diagnosis: - Yellowing around leaf veins could be a sign of Magnesium or Iron deficiency - Leaf tip curling down could be a sign of Nitrogen Toxicity. - Both could be caused by improper ph balance in water Possible solutions: - Applied Botanicare CalMag+ as a foliar feed and added some to the reservoir. CalMag+ contains Calcium, Magnesium and Iron. - Diluted nutrients in reservoir to lower amount of nitrogen being fed to plants. Was feeding them at 1300ppm, lowered it to 1050ppm - Tested runoff and saw it was coming out at 5.4pH so I increased the pH in the reservoir to 6.0. Now the runnoff is testing at 5.7pH, meaning that my rootzone is in the optimal range of 5.5-5.8 Well wait and see how the plants react to these slight tweaks. Hopefully we start to see a nice healthy even green again.

Final few weeks left of the Bubba cheesecakes just tapwater from now on no microben 👌

So here we go - the flowering stage. Made some defoliation and lst to open them for more light penetration.

Hi everyone! So nothing really of note to report this week, she is definitely getting closer to harvest as she is uptaking significantly less nutrients now than she did a week or two ago so I have had to go down on nutrients and will probably have to lower it even more as it is still raising daily. She is also getting a bit fatter and denser but I'm really hoping to see some improvement here over the last weeks🙏 I have again been pretty busy outside the grow tent this week building and setting up an outdoor gardening area at our house for my girlfriend to grow her vegetables, fruits, and flowers so I have had less time to be in there and have forgotten to take pictures some of the days. But it has been lucky that I haven't really had any problems to attend to in the tent so all I have had to do is the daily PH and EC measurements and then change the water every other day. Happy growing to everyone and thank you for the comments and encouragement! really appreciate the community in here and it's been a real help in my first grow!

Barneys Farm Red Diesel Revegged Grow 7 Weeks of Flowering completed 31st March 2020 Hi everyone I hope you are all well. Despite the rain and high humidity this plant is still hanging in there. She is super resilient and so far she seems to be mold resistant 💪 However I do not wanna push my luck too far and will probably harvest at the end of the week . Thanks once again for reading my diary update & I shall see you next week 👍

Good harvest for just 0.25m². Fast growing plant very resistent. Good for beginners. Should be a monster if it wasnt the heat coming at the late flowering

Little yield but that’s because of my mistakes, great looking, frosty and dense buds! Smells amazing! Taste: 9/10 Smell 10/10 Looks, 8/10 Would like to try this again and try get a bigger yield!

Semana sel 9 al 14 de septiembre 2024. Vemos un desarollo bastante vigoroso en todas, esto también se puede adjudicar el hecho de la nutrición que han estádo llevando esta tanda se fem y regulares, la mandarine qué nació con apical va bastante bien.

Esta semana quitamos productos, que termine bien de chupar todo el alimento, y que hinchen ya estás últimas semanas. .tambien lavaremos la raíces esta semana para quitar el alimento sobrante y las sales acumuladas. Empezaremos con el ESTRÉS HÍDRICO:el cual cada vez que regamos, regamos menos cantidad , así La Niña resina estas últimas semanas. Os incluyo vídeos.

New Tent, Started with Mr Canucks GRO medium, and planted directly in 5 gallon pots with a light watering center and plastic cap to hold the humidity. Currently 2 of 4 have broken the soil in 4 days now it’s time to keep the medium moist. The weather is chiller right now. I adjust my grow tent temp to 78. It feels the tent is dialed in for the othe 3 to germinate. When checking the seeds I realized I put them to deep. So I knuckle depth to see if there is success. The soil was cold so hopefully increasing the temp provides better results.

3 seeds from barneys farm : zkittlez Og auto. Diary : Day 1: I dug a pit and cleaned my dirt with metal grid and a wheelbarrow & Installed the greenhouse. Day 2 : I rotated my dirt and added universal soil. 4 x 70l to area of 6m2 . I also planted seeds in universal soil without sprouting first. Day 3 : I gave water and checked for sprouts. Bought moist meter and dripping hose. Installed those and making the greenhouse more moisty now. Putted seeds in small sprout basket for now. Feeling : Verry happy for my first time. Lots to learn.. . Excited

09.03.22 18 день цветения. Опрыскиваю талой водой из пульвика 10.03.22 19 день цветения. Опрыскиваю талой водой из пульвика. Полив талой водой 4 л + Pro Bloom 0.8 мл + Fulvic 8 мл 11.03.22 20 день цветения. Опрыскиваю талой водой из пульвика 12.03.22 21 день цветения. Опрыскиваю талой водой из пульвика 13.03.22 22 день цветения. Опрыскиваю талой водой из пульвика 14.03.22 23 день цветения. Опрыскиваю талой водой из пульвика. Пообрывал немного листьев, освободив нижние ветки для доступа света. 15.03.22 24 день цветения. Делаю раствор на 4 литра воды: MGB=10,6/2,64/10,6. ph=5.65, ppm=970. Перестаю давать ProBloom и Dimond Nectar. Пообрывал немного веерных листьев. Опрыскиваю талой водой из пульвика. 8я неделя завершена успешно. Шишки начинают набухать и это не может не радовать =)

Waiting for first signs of life … While we are, I thought I’d give you a short explanation on the software’s graphics in case you did not follow my first diary. The one to the upper left, as its headline says, is the temperature graph. Most important line is the red one, showing the leaf temperature measured with an infrared temperature sensor. As there are no leaves yet, it is pointed towards one of the pot’s wall at soil level. Air temperature from a sensor that usually hangs around somewhere around top level is violet, and the grey line is the outside temperature close to the tent, helping the software to determine if a main blower action will effectively lower temperature. As I learned from the first grow a plant day that corresponds to the natural day can cause enormous gaps both to temperature and humidity, I inverted the plant day now, starting their night at 11 a.m. So after the first day temperature will only vary around 1.5 °C, which is of course due to the low light intensity too. Humidity graph on the upper right is quite crowded. Main line is the blue one, tent air humidity, which on this first day was between excellent 65 – 70% most of the time. For the moment humidifier is electrically disabled. There is quite some excess humidity on the tent floor and no reason to push this any further. Outside air humidity is grey again and taken from the same outside sensor that reports outside temperature. The soil humidity sensors are simple analogue capacitive sensors which have their flaws. I am interpolating their measurements to have a somewhat smoother reading, but as you can see from the turquoise humidifier reservoir reading (in legend named as plant soil hum 1), they can get confused when humidity is very high and start to report random numbers for some time. The most important graph for all growing stages is the lower left one, where the pink line meaning plant VPD should be inside the green optimum range for somewhat perfect conditions. This cannot be attained all of the time – dehumidifying isn’t as easy as humidifying –, but software tries its best to do so. Outside VPD is grey again. The last graph is more for amusement than anything else. The light intensity sensor is hard to position correctly, and everything you see about illumination and DLI (orange and green, plus grey for the accumulated 24 h DLI) should be taken with some spoonful of salt. Any resemblance to real world professional instrument readings can be considered purely coincidental. The violet line is the CO2 reading from such a sensor, and you can see that its tiny peaks correspond to even tinier black peaks at the bottom of the graph, reading TVOC values which in this case, once they will be more than possible measurement irregularities, can be interpreted as smell. ------- End of week 1: All seeds germinated. I wasn’t at home most of the time, and it turned out using the humidity sensor to monitor the humidifier’s tank wasn’t good for the stability of the system. Arduino crashed, so there are no pictures yet and no graphs to show. I have the feeling light was a bit low as the seedlings grew a bit tall, but with lights now up to 20% I guess this problem is fixed. More tomorrow when I have some more data to share. Even more end of week 1 (I extended this week to 9 days as I cannot tell when the seedlings started to show): Lights are at 40%, meaning 40 W in total. No reason to give them new water until next week. As some flies showed up from the BioBizz soil, I added 2 yellow cards. So far, everything in normal ranges. I’ll switch the control to grow phase soon which will raise the VPD slightly by 0.5 kPa. It’s interesting to see the CO2 level started to climb by 50% during their last night and has not come down to baseline afterwards. I restarted the app to check if the sensor had lost its calibration, but it still sits at around 660 ppm now.

GSC (& Sour Diesel - tentmate) seem to be growing with very healthy green growth. Responding well to light 1/3 to 1/4 recommended dose of Fox Farm nutes. Sour Diesel, which was much smaller and had weak trunk stem as seedling is slowly catching up to GSC.