I still have to go thru all the photos but wanted to get the video up for all of them first. If your interested in the pics come back at the end of today and they will be up it just takes a while. Noticing more seeds poppin thru, I hope it's from the moonshine cookies pollen cuz the female turned out bomb and the male wasnt too bad either so they might be decent seeds. Started the flush on the citradellic and the other ones might have got their last feed yesterday. Should be finishing up next week and the week after.

Week is going great. Buds are starting to thicken up and trichomes are starting to form. This is the thirstiest plant i have had, probably partly due to the high day time temperature, but it looks to be just a minor problem. Can start to see that the yeald will be higher than i expected just by looking at the buds.

colas growing in tremendous amounts, she is happy 😃

Tag 25: Die beiden entwickeln sich rasant.

I wasn’t in the mood but now im in 🕺

day 3 - hulkberry forms first pollen sac.... might play with the fire and try to get rid of it if it is the only one. not too sadisfyed with RQS automatics yet tbh. :( day 5 - the other flowers seem to be female, as you can see on the hulkberry picture from today.

Hey folks, I'm finally back at it again. It took me a while for a couple of reasons: 1) I usually only grow in the winter. 2) I completely revamped my grow room after the issues I ran into with the last setup. 3) It took me a while to brainstorm exactly what I wanted to do. I bought these seeds from D.C. Seeds and was very pleased with the experience. I'm very happy to give business to a fellow American and Veteran. I've only ever purchased seeds from the UK in the past and that experience has been "dodgy" to say the least (not the vendors fault, but the transit). I've only ever grown photo's, but chose to go with all auto's moving forward. After calculating the intensity of my current light, with it being on a 20/4 rotation I'm very close to hitting 40 moles per day, at least directly under the light. It doesn't quite cover my 2' x 5' trellis. I'll eventually upgrade my light, but auto's should get me the best bang for my buck with this light. Also, I spent a pretty penny building this new grow room. The other obvious reason for growing auto's is their shorter seed to harvest time. I've got a small grow area, and never plan on expanding. Theoretically, auto's will allow me to produce the most out of my room. A few things about my grow room: 1) I lined the whole closet with 1/2" plywood and put that piece of ply the air intake/outtake/power as the divider between each side of the closet 2) The grow room itself has ply on all wall surfaces so I could mount stuff to it and paint it 3) The other side of the closet is my storage/prep/power distribution/etc. area. Maybe I'll take a pic one of these days 4) My last grow my carbon filter/fan was venting into the other side of the closet. This created a headache for a number of reasons. I tapped a 4" hole through the floor and am now venting into my crawl space below the house. 5) I moved to bubbleponics to speed up my grows even more. I will be removing the drip system once the roots hit the water in the res. 6) The larger res. will hopefully make my life much easier. Late in the last grow I could only fit 3 gallons of water in the bucket and that sucker was pounding down at least a gallon a day. That required too much micro-managing for me (both ph and refills). 7) I no longer have a fixed trellis with chicken wire. The trellis is held in place by dowels that I can pull out by hand. The short sides of the trellis have hinges on the bottom, so I can fold it and pull it out easy-mode. Lastly, I'll be using string for the trellis so come harvest all I have to do is cut the string instead of dealing with trying not to destroy buds pulling them through chicken wire (it takes forever). 8) I built a light diffuser on the other side of the air intake 9) My res. is on a motorcycle lift I'm using a drill to move up and down I have now started using Jack's as my primary nutes. They tell you the full break-down of each macro and micro nute, giving me more control and understanding. I think House & Garden is a good product, but when stuff goes bad it's more difficult to troubleshoot when you have no idea what each piece of their full lineup contains. I'm assuming it's kind of a proprietary type thing, which I understand, but knowledge is power. I am still using their Drip Clean (while the bubbler is going) and Roots Excelurator Silver, both excellent products. I'm still using Hydroguard, and will FOREVER. I'm a true believer now of why Hydroguard is necessary for any hydro application, IMO. I also purchased water soluble fulvic acid, but have decided not to use it for this grow....or at least while the bubbler is going (I'll elaborate below). Ok...now that all that is out of the way.... I really wanted to use my well water instead of R/O to make my life easier. Soooo....I filled up my res., and put two seeds in the system immediately. Nothing happened after 1 1/2 weeks. I finally opened up the cubes and saw that the beans had popped, but it looked like maybe I drowned them, or they ddin't grow straight up or something. For round two, I didn't change the water out, and decided to soak the beans for 24 hours in R/O water first. I had the exact same problem. I'm still not really sure what happend, but I suspect it was the well water. My PPMs were sitting at ~500 with the well water, which was probably too spicy for the beans just starting. Also, my well water is questionable (even though it's at 165ppm), but I won't elaborate further....it's a long ass story and I've spent an absurd amount of money on it. Lastly, I did put the Fulvic acid in, and it was very messy. I really want to avoid having to clean my res. Once the roots get big it will be a real pain in the ass to clean. I'm leaning towards not using the Fulvic acid this grow just to see how things go. I had 10 beans total of the Sour Apple and have already ruined 4. So here's hoping third times the charm. So, I went back to my tried and true method: 0) R/O water for everything. Ditching the well water idea. 1) Soak beans in R/O water for 24 hours 2) Paper towel method between plates on a heating mat 3) Once the roots pop, I place them pointed down in the hole of the rockwool cube 4) Hand water once a day by dipping the cube in the pre-mix of 1/4 strength Jack's and everything else I've listed above. This put my PPMs at 300...a way more reasonable value for starts. It's been exactly 7 days since I followed the above. It's probably hard to see but the cotyledons came up, and multiple roots have come out the bottom of the cubes....way faster than I've ever seen since I started growing. That means even though I'm doing my old process this already shaved at least a week off of when I'd normally put it in my bucket in the past.

12/12 + 28 jours Mon 1er Schwazzing !!! Photos et vidéos avant et après la defoliation 1️⃣ 🏠 90x60x90 ☀️ FC-E 4800 => puissance a 70% 🍁 1x Black Bomb / Philosopher Seed 2x Amnesia Lemon / PEV Seeds 1x Blueberry / PEV Seeds 1x Blueberry / 00 Seeds 1x Wappa / Paradise Seed 1x Dark Phoenix / Green House Seed 1x Quick Sherbet / Exotic Seeds 1x Mango Cream / Exotic Seeds 1x Banana Frosting / Sensi Seed 1x Hindu Kush / Sensi Seed 4x Fast Mix / Sweet Seed 📎 https://growdiaries.com/diaries/122084-grow-journal-by-soosan 📎https://growdiaries.com/diaries/124052-grow-journal-by-soosan 2️⃣ 🏠 30x60x50 ☀️TS1000 => puissance a 80% 🍁 4x Quick Sherbet - Exotic Seed 📎 https://growdiaries.com/diaries/122080-grow-journal-by-soosan Sponsorisé par Mars Hydro

Started with a super low dose of massive bloom now that my flowering has started on these, it was recommended by the hydro guy and I wanted to use something as just the organics has not been thickening up the way all of my bottle grows did and I think it is due to a lack of PK. I also added in some myco spores on vermiculite that I got from the hydro store as well, figured it would be beneficial for the roots during flower and likely should have had it the entire grow. I have tied down my one plant in more places as a test to see if it will produce better than the other 2 which were only tied in one spot.

My first time making alcohol tintcure Using the c1 , Hold on tight gonna be a trip

Fed once this week with a weak feed including top max. I use kombucha vinegar as pH down. Water from my tap is ph6.8-7.0 and 38-42ppm so I might start using calmag supliment as the ppm at my old house used to come out of the tap at ph7. 2 and 200-220ppm. I had 2 plants that didn't like the light at 30000 lux and started bleaching so I took them out. I've defoliated today day 35 as humidity was getting over 80% and also to let light to the lower bud sights. Pre flower pistils showed on some plants around day 33 (some still have none) so I'll consider this the end of veg start of flower. The kalimist indica pheno is still not showing pre flower pistils but is always hard to force flowering when it's not mature for some reason. It's always 7-14 days behind everything else 🤔

.

Switched to flushing on monday morning, watered 1.5 gallons of distilled water only through the soil each morning. For those who do not believe in flushing your plants, remember in elementary school when you added dye to the water of flowers and visibly saw them change colors? Same idea. I have been checking the maturity of the resin heads closely under 60x magnifying. Turned off the lights for good on her last night (Wednesday), planning to leave her in the dark a few days (72ish hours) and then planning to harvest a few hours before the lights would have turned on. For my first indoor grow, my own custom living soil build, massive amounts of cover crops, only aact (actively aerated compost tea) with natural farming inputs, and some ferments to boot I think this is one amazing plant. Looking forward to drying her for a few weeks the splitting her in to multiple jars to test 30, 60, and 90 day curing with a 4th jar to smoke from when I get impatient.

Vegetando Fuerte!

Now on 8x nodes per plant.x Day 1 - SB2, 1 stem got broken during training 😩😭😩😭😩... Hoping it will be saved but Day 2 - more aggressive training on both plants to level the main frame

Week 8 of flowering, Biscotti mints 2 looks more close to the end than Biscotti mints 1. Both very frosty, smelling really good. It’s been 1 week since I flushed them 😍 Looking at the trichomes they are close to the stage I like(around 20-30% amber) so I will harvest them.. probably 1 more week. Overall really happy with what I am seeing 🤩 can’t wait to smoke it 🤪

Zz