On Day 29 i mixed 2l of rain water with 4ml of calmag some melasse and 5ml of bio grow and gave each plant 1l. On Day 33 i gave them each 2l. I mixed 4ml of calmag 4 drips of supervite and some melasse with an ph of 6.5 . On Day 35 i gave them 1.5 l for this i mixed 3l of water with 30ml of Lab 3ml of alfa boost 3 drips of supervite some melasse and 3mlbof calmag. Bevor i watered them i put 3 scoups of feeding biobloom at the top of the soil then i watered them and added some weeds from my garden at the top so the soil stays wet any longer.

Día 66 (05/08) Cerrado por vacaciones Día 67 (06/08) Mi amigo viene a casa a hacer un riego con 1 Litro de H2O pH 6,5 Día 68 (07/08) Cerrado por vacaciones Día 69 (08/08) Vuelta de vacaciones! A ver como están después de 5 días sin verlas... 😱 Riego con 1 litro de H2O pH 6,5 Añado 3 cm de sustrato nuevo porque se ha compactado y se ven las raíces! 😢 Día 70 (09/08) Riego 500 ml H2O pH 6,55 Eliminación de algunas ramas bajas Día 71 (10/08) Riego 500 ml H2O pH 6,55 Sesión de fotos semanal! Día 72 (11/08) Riego con 1 Litro de Té Vegetativo de Lurpe Solutions. Preparación: 24 horas con bomba de aire (oxigenación) con ingredientes: Green Sunrise 8 ml/L + Insect Frass 16 ml/L + Hummus Lombriz 8 ml/L + Melaza 1 ml/L + Kelp Hidrolizado 0,25 g/L Aplicación foliar Kelp hidrolizado de Lurpe Solutions a 0,25 ml/l 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

Spider Mite infestation. I put the story in the pictures. Long story short, the infestation focused on the lower (ticker) branches of AK2 and this explains the undergrowth compared to her sisters. The trichomes are half-cloudy / milky and she will be ready for harvest within a maximum of 2 weeks. I defoliated her by removing nearly all leaves and put her aside in the grow room. Open to any other suggestions. I also confess that I neglected the plants and did not check the source of the white point. I also used some of the soils I used in other outdoor plants which I believe the source of the infestation. Seed Formations AK2, again produces seeds in lower branches. I did not pollinate this one and there is no other source that she is pollinated. I didn't see any Bananas, too. I am thinking it might be because of the stress from the Spider Mites. Open to any suggestions on that too. Other Two Girls I spotted some mites on them too, but it was not alarming. I defoliated the infested few leaves and they will be okay. Jack Herer needs two and White47 might need another 3 weeks and that is it. I think they all will be okay until then. I will keep a close eye on them. Sorry for not good news this week.

BCN Power Plant Week 13 11L Pot LED: SP250 (245W) for Flow. Stage Canna COCO Mineral Nutrients: 👇 Sensi Cal-Mag Xtra: 1 ml/L Power House Part A: 1.5 ml/L Calcium Plus Part B: 1.5 ml/L Stimulus: 1.5 ml/L Bud Explosion: 1.5 ml/L

Ok so I'm going too only feed pH water from here on out too force the plants too use up all that's in the soil , I am hoping I can carry them on now for the next 2 weeks like this before they are ripe ,

Hello my fellow Growers👊 It was another Great week for the Kush Fromage 🙌 All the pictures were taken on Sunday, which was Day 42 of Flower. She is really starting to reek the whole area up. It is a very earthy kush like smell with fresh grapes on a grapevine mixed in, it's a very unique smell😊 She is supposed to be a very heavy resin producer and have a high THC and CBD content. Anywhere from 18-26% THC and ~3% CBD according to the breeder. I can tell you this it is one very very resinous plant😵 even the fan leaves and smaller leaves that have no trichomes on them have developed an oily resin on them. It's awesome so I can definitely say it is a heavy resin producer. If a sugar leaf touches another leaf you can see an oily resin where it touched it, my fingers get sticky just from the fan leaves👍The breeders estimated time of Flower is around 63 Days. So we got a few more weeks to go!! I hope the buds will fill in a good bit more but I am not counting on them getting huge due to this strain being more on the quality over quantity side of things. It's not a bad producer and I'm sure they can get some pretty huge flowers on em, but I have seen plants that can produce way more, but this strain makes up for it in its potency and resin production. Plus I personally like the Quality over quantity strains. Though at least nowadays its nice that we have a lot of strains that are a nice compromise and have great yield while also having great quality😎 Thank for stopping by and checking out the Grow👊👍 Happy Growing an plentiful Harvests to you all!!🙏

Day45 continue main lining,lst and def. Day46 2,5lt ro water 2,5ml sensi cal mag extra Total 200 ppm pH6.2 Drain 150 ml 880 ppm. Day49 18.01 3lt ro water 4ml growA 4ml growB total 1050 ppm ph 6,1 Drain 200ml 1080ppm.

Amnesia and Cheese starting to create pistils, North Light hasn't started yet

High Level Again Eva seeds High level 17th January 2022 We had an awesome thunderstorm yesterday afternoon ( see video ) it was amazing how quickly the temp dropped when that rain started . 😍 sweet relief!! Paying for it today a little because it is quite humid but in this area it will be very dry again before long. I gave it some enhancer from greenhouse feeding along with the weekly myco 👊 Did a little defol of the older leaves and lowest branches . Thanks for stopping by 👍

Reaching for the lights. Looking strong.

Powder: GREENHOUSE BIO FEEDING Line which are organic! For LIQUIDS ******GREEN BUZZ LIQUIDS***** also organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W ☀️Also special thanks to VIPERSPECTRA P2000 (200W) & XS2000(240w) LED growlights 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.

Did a lot of training and defoliation. I will move her into a bigger tent now as shes about to start flowering hopefully by end of next week 😍. Will also be using scrog net and will add Bud Candy along with the other nutrients : PH perfect Micro,Grow, Bloom

OK guys I'm back after being away for 2 weeks. I've proceeded to a final transplantation into a 9L AirPot container, right before I left for vacations. Despite the transplantation, no special operation was done, I want to see how this clone is going to grow on its own and I don't have enough room for training / bending. A friend was in charge of the grow room while I was away, and she did a pretty good job. The clone is healthy, standing proud and praying the light. I started to build the manifold for 4 colas but some side branches have already reached the canopy, that clone wants to produce weight! She will remain under vegetative stage for 1~2 weeks before flipping into 12/12 light schedule. I can't wait to see her full of buds! Thanks for stopping by 👊

Very satisfied

💩Alrighty then Growmies We Are Back At it 💩 Well folks we just finished up the last run and so we are back to do it all over again 😁 So what do you say we have some fun 👈And what we got here folks is a Strawberry Blast 🍓 🍓 🍓 🍓 Strawberry 🍓 Gorilla , Strawberry 🍓 Banana 🍌 and there new release 🍓 Ztrawberriez 🍓 from FastBuds And we also got Strawberry 🍓 Cola from Exotic Seeds 👉 Well we are now around day 77 growmies and its been another good week 👈 So we are finally getting close to the final stretch and things are going great 👍 👉We chopped the Strawberry Gorilla and i am 100 % Happy with it , now we are down to just 3 won't be long before another one gets chopped 👍 They all smell awsome , each is very different , sweet , berry 😋 Really happy with them .... 😌 FC4800 from MarsHydro Lights being readjusted and chart updated .........👍I've added a RU45 to the mix 👍 www.marshydro.ca 👉I am using Agrogardens for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.agrogardens.com 👈 Agrogardens Cal MAG Agrogardens Grow A+B Agrogardens Bloom A+B Agrogardens Bud Booster Agrogardens PK13/14 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈 Would you like to hang with the growdiary community 👉 https://discord.gg/gr4cHGDpdb 👈

Watering with plain water. Just waiting for milky trichomes. 💪

Sorry been busy but They looking Great!! 👍🏼Almost there to the finish line.

Week 15 - Flower Week 11 Lemon Jeffrey by IRIE Genetics (14 Starts for 8 Finishers) 63-70 Days Flower (9 - 10 Weeks) Weeks Observations: - Our light leak on July 6th through July 31 ‘cost’ us ~ 21 Days. Extending Harvest to account for 21 day light leak. New Harvest Date 12 Sep 2023, Plant Day 121, Flower Day 86 Seeds Wet: Monday 14 May 2023 Harvest Date Range: [ 2023-08-11, 2024-08-21] Start of week: - Dates: [2023-08-27: LJ2Q 106:F:11:1, 
 2023-09-03: LJ2Q 112:F:11:7 ] End of Week: - Plant Height Range: [46, in] - Water/Day/Plant: [935, ml] EnvironmentalCurrent: - Scotoperiod: [ 11, hrs] # 1900 - 0600 + 24 - LightIntensityPeak: [ 1000, µMol/m2/s ] - DailyLightIntegral: [ 42.1, Mol/m2] # Target: < [ 40, Mol/m2/day] - LightDistance: [ 6, in] # 3.5” LESS than Optimal for SP3000 - TempAvg: [79.1 , °F] - RH: [ 68, %] - VPD: [ 1.10, kPa] - 230*4*11/8 - FeedwaterPerPlantPerDay: [ 1265, ml] - Feedwater: [ 10.12, l] - EC: [ 2.0, mS] Environment NOTES: - RULE - CLOSE Room Airflow during LOW TEMP periods(2030 - 0700) - OPEN during HIGH TEMP Period (0700 - 2030) SOP: - WEAR CLEAN GLOVES FOR ALL SEED OPERATIONS - CLEAN All Instruments before use - Light Strengthvegetation := 100 + (#nodes * 100) - Light Strengthflower := [ 1000, 600, µMol/m2/s] - Scotoperiodvegetation := [ 1300, 1900, 6, hr] - Scotoperiodflower := [ 0600-1900, 13, hr] Environment - Late Flower (Week 10-14) (F5-F10) - Temp: 78-80°F - VPD: 1.2 ± 0.2 - Photoperiod: 11/13 - Light Strength: [930, 850, µMol/m2/s] - EC: 2.3 # Week F5-F8 - EC: 1.8 # Week F9 - EC: 1.1 # Week F10 - Finish (Week 14) ( F10) - Temp: 78°F - VPD: 1.3 ± 0.2 PPFD: 750 peak - Resin Bloom ONLY - EC: 0.8 _______________________ Base Application for 10 Gal: - [x] Primer A: [ 100, ml] - [x] Primer B: [ 100, ml] - [x] Silica Skin: [ 35, mll] # Reduce to reduce/eliminate Sediment - [x] SLF-100 (Enzymatic Root Cleaner): [ 50, ml] - [x] King Crab (Biology): [ 5, ml] __________________________________________ - @ EC: 1.7 Supplement: [ Application Rate], [ Total Delivery for 2 Gal Solution] - [ ] Primer A: [ 10, ml, gal], [ 12.5, ml] - [ ] Primer B: [ 10, ml, gal], [ 12.5, ml] - [ ] Silica Skin: [ 4, ml, gal], [ 5, ml] - [ ] CalMag Fuel: [ 4, ml, gal], [ 5, ml] - [ ] Peak Bloom: [ 4, ml, gal], [ 5, ml] - [ ] Resin Bloom: [ 4, ml, gal], [ 5, ml] - [ ] SLF-100: [ 5, ml, gal], [ 10, ml] - [ ] King Crab: [ 0.5, ml, gal], [ 1, ml] - [ ] EC: [ 1.7, mS] 85 ml/plant X 11, : 935 ml/plant/day, 2.4x of field capacity Meaning ALL Fertigation through pot is Refreshed 2.4 times per day with this schedule. ____________________________________ Mon 28 Aug 2023 # End of Harvest ORIGINAL Window , before discovering light leak LJ2Q 106:F:11:1 - [x] Will scope trichomes by hand, and set a chop date today. - Some are ready today, Some look to need 10 - 14 days. This has been an interesting grow - the extra stretch munged the SOG Strategy - with severe Chiropractics I still have >±12” of height per plant. We should be harvesting today . . . - We could conceivably take the grow as far as Day 139, if we calculate a 4 week light leak forward. That would make LATEST DATE 24 SEPTEMBER - - IF We go more than this week - Week 15 Nutes (Mixed Daily) - Mon - Wed: ONE SHOT, EC: 1.7 - Thus - Sun: ONE SHOT, EC: 1.4 - NEXT WEEK - Mon: Resin Bloom: EC: 1.1 - Tuesday - Harvest: Resin Bloom: EC: 0.8 - ELSE if we take them down next Sunday: - [ ] Been feeding The Rooted Leaf Hydro schedule, Base Nutes plus Silicon. Need to move to harvest nutes, potassium (+Resin Bloom/+Peak Bloom) at - [ ] Monday:+Resin Bloom/+Peak Bloom: EC: 1.7 - [ ] Tuesday: EC: 1.4, (+Resin Bloom) - [ ] Wednesday: EC: 1.1, (+Resin Bloom) - [ ] Thursday EC: 0.8 (Resin Bloom Only) - [ ] Friday EC: 0.8 (Resin Bloom Only) - [ ] Saturday EC: 0.8 (Resin Bloom Only) - [ ] Sunday - Harvest Growtek Mod - 170 ml/event per emitter -> 2 Gallons Input - ___ EC: [ 2.0, mS] Tue 29 Aug 2023 LJ2Q 107:F:11:2 EC 1.6+ - Defoliated (final) blocking and unviable fans. Looks better - clearer airflow Wed 30 Aug 2023 LJ2Q 108:F:11:3 EC: 1.6 For 2 Gal (ml’s) RLA Minerals 14.0 Primer A 14.0 Primer B 7.0 Silica Skin 10.5 Peak Bloom South Cascade Organics - [x] SLF-100: [ 5, ml, gal], [ 10, ml] ___ Plant Success (Beneficial Bacteria, Crab ‘Frass’) - [ ] Sunday - Harvest? - [x] King Crab: [ 0.5, ml, gal], [ 1, ml] Thu 31 Aug 2023 LJ2Q 109:F:11:4 EC 1.4 For 2 Gal (ml’s) RLA Minerals 12.3 Primer A 12.3 Primer B 9.2 Peak Bloom Required 1 qt to bring down from 1.6 to 1.4 Friday 01 Sep Jul 2023 LJ2Q 110:F:11:5 EC 1.1 For 2 Gal (ml’s) RLA Minerals 7.6 Primer A 7.6 Primer B 5.7 Peak Bloom Sat 02 Sep 2023 LJ2Q 111:F:11:6 EC: 1.4 Peak Bloom as Needed for Dilution - [ ] Scope Trichomes Last Time With a 21 day light leak, we’ll extend harvest to Day 118, Flower Day 90 - or 69 Unleaked Light Days . . . Through End of Harvest, Daily Daily Feed through Harvest Day -2 Per TWO Gallons: EC 1.4 - [x] Primer A: [ 12, ml, gal] - [x] Primer B: [ 12, ml, gal] - [x] CalMag Fuel: [ 4, ml, gal] - [x] Silica Skin: [ 4, ml, gal] - [x] Peak Bloom: [ 4, ml, gal] - [x] Resin Bloom: [ 8, ml, gal] - [x] King Crab: [ 0.5, ml, gal] - [ ] SLF-100: [ 5, ml, gal] - [ ] Reduce to EC 1.1 on Harvest Day -2 - [ ] Reduce to Resin Bloom Only, EC: 0.8 Pre Harvest Day DECISION - We’ll take the girls down Flower Day 83, Nominal Day 62 assuming 21 Day push for light leak. It’s not in practice3 that long - we should be good, if not - latest day 90 (Nominal 69) ____ Sun 03 Sep 2023 # Flower Day 77 LJ2Q 112:F:11:7 EC 1.4 - [x] Dismantle And Clean Res, Pump, Chiller, Lines - [x] Clean Res - [x] Clean Pump - [x] Load Res with a a gallon of HOT tap water, a cup of 30% Vinegar - [x] Run Pump for :30 - [x] After 30: Reverse Lines - [x] Run Pump for :30 - [x] Stop pump - [x] remove tubing from pump and chiller - [x] Remove pump, reclean - [x] Clean Chiller Tubes - [x] Rinse with 30% Vinegar - [x] When Dry: Reassemble & Replace