Watermelon zkittlez va creciendo muy rápido también igual que chemical bride puedes ver el otro diario y verás que grande va

Semana 3 Prefloracion. Día 55(29/08): Segundo día de la 3 semana de floración, entramos con algunas complicaciones, o eso creimos, aparentemente no fue nada grave. Aun asi por el momento no voy a fertilizar con monster bloom. Ya va a tocar. Día 58(01/09): Ayer regue con Melaza, y los mejores resultados de Abby. Me decidi a usar el monster bloom.

Hello Diary. Mimosa Auto has entered the first week of flowering, at least as far as Mimosa # 1 is concerned, given that Mimosa # 2 is a few days behind. Mimosa # 1 has grown 80 cm which worries me a bit, I hope it won’t grow too much in height anymore. The plant is quite stretched, and the distance between the branches is longer. This is not the case with Mimos # 2, it is the complete opposite. A small bush, full of large leaves. So on the 28th day I did a defoliation on both plants, plus the Sherbet Queen with whom they share the “Farm”. I removed the leaves and branches at the bottom of the stem, now the air flow through the plants is much better. Mimosa # 1 is very nicely shaped with a solid elongated stem, and the flowers began to form at the ends of the branches. For Mimosa # 2, I used Bending clips, small plastic devices for bending branches. We'll see what happens. Watering has become more frequent, every two days I water with about 2 liters of water. This week I added only one Easy Bloom Booster tablet to stimulate flowering and I adjusted the p.H to a value around 6.3 and at one watering I added CalMg preventively. The conditions on the Farm are in line with the summer months. The temperature is slightly higher, 28 degrees and the humidity is around 50%. It is expected that the temperature will increase in the coming time, considering the temperatures during the summer. I also changed the light mode, I put 4 hours of darkness and 20 hours of light. Both plants look really good, the leaves are a healthy dark green color and for now everything seems to be going as it should. Mimosa Auto # 1 - 80 cm Mimosa Auto # 2 - 45 cm Here’s what it looked like last week. 08/06/2021 - Day 24. Watering. I put one Easy Bloom Booster tablet in 6 liters of water and lowered the pH to 6.5. With that, I evenly watered all three plants that are on the “Farm”. Since the last watering was three days ago, the branches and leaves were very droopy which is an indication that they were very very thirsty. Temp / Humidity on the farm - 27.5 degrees and 45% humidity. 10/06/2021 - Day 26. Watering. I prepared 7 lit, lowered the p.H to 6.2 and did not add any other nutrients. 12/06/2021 - Day 28. End of the fourth week. I did defoliation on all three plants and put bending clips on Mimosa # 2. I think it will respond very well. I photographed the plants, measured the height and then watered them. This time I added 1.5ml / lit of CalMg preventively. That’s it for this week, see you soon.

The temperature had some fluctuations, and the plant got a bit more humidity a little bit of mold on a few fan leaves.. a bit too much water consumption

Esta Lemon ya esta engordando bastante en esta semana. Es muy sensible a la EC entonces le estoy dando 1.0 de electroconductividad. Con un ph de 6.3 tratamos de que la planta se alimente bien de NPK y micronutrientes. En estas fechas lo mas complicado es la humedad, y mantenerse en los valores fuera de peligro por moho. Hay que estar atentos

Buds gettin frosty!

12/6/2022: Strawberry Gushers is really starting to fade. Some nice purple showing up on some of the leaves. She has some droopy leaves, so I think she is a bit over watered. I skipped watering her today, other than a light mist to keep the soil on top moist. Orange Bubblegum is looking good. Still showing some fading on the lowers, so I hit her with a compost tea today. About 1 liter. The Newberry is also showing some fading on the lowers, but her leaves are slightly drooping too, so I only gave her .5 liters of the tea. 12/7/2022: watered in the 2nd dose of nematodes today, even though there are only a couple fungas gnats left. Gave each plant 1 liter, mixed with the ThermX-70 and some FishShit. The big update today is with the Strawberry Gushers. I found a few nanners. Caught them real early and plucked them, but if more show up I may have to harvest earlier than expected. Used my Bluetooth microscope today to look at the tricomes and Orange Bubblegum is mainly all foggy, with very little amber. I hope I can give her at least another week or two. The Orange Bubblegum and Newberry are a mix of cloudy and clear, with no amber, other than on the leaves, which doesn't count in my book. I'd still say another 3 to 4 weeks. 12/9/2022: The Strawberry Gushers is really fading, and the other two are starting to fade more as well. The Strawberry Gushers is not taking up water as fast anymore, so I just misted the top soil. For the Orange Bubblegum and Newberry I watered 1.3 liters at 6.6 ph, mixed with BuildABloom, coconut powder, and ThermX-70. Also added some fresh aloa juice I made for a new 3x3 bed I'm starting. Did not see any other naners, and the fungas gnats are almost completely gone!!! 12/10/2022: (Day 75) had about 2 liters of leftover water from by 3x3 bed I'm making soil for, so I split that between the 3 plants, mainly just to wet the top soil. Realized after the fact that the water had some Rootwise Micro Complete in it, which the plants don't need at this point, but it won't hurt. Ph was about 6.5 and it also had some FishShit and ThermX-70 as always. Also, reduced the light intensity down again to 600 PPFD, which is a DLI of about 39. Avg. VPD:1.5 PPFD: 600 DLI: 39

Stäben kommen gut für Outdoor, der Kollege macht sein Ding 😅 Botaniker was soll man sagen hahaha

Everything seems to be going great. The buds are developing nicely and there are no signs that plants are stressed at all. I hope they continue to fatten up over the next few weeks for a good harvest!

Here come the buds! ✌️🏻

Another week almost over, the girls are beautiful and smell great. Apparently everything is under control, I'm really looking forward to the results. Happy growing! 🌱🌱🌱

The gals are still loving the fc4800 and their new 8x8 mars hydro grow tent as much as I do👍 leaves are sticking straight up towards the light. Love how easy the zippers are to open and close. Nice and strong and guaranteed to last. It has extra material on the backside of the zipper that helps for light leaksand enough ports and vents for anything you need in it👍. the tsw2000 is still going strong and is also a very good light. Its been going almost nonstop for 6 months and still working the same as when I got it👍. not much heat off both lights but the fc4800 is alot cooler and the heat-sinks work extremely well. I have it daisy chained to the tsw2000 and 1 dimmer controls the other and i don't need to be reaching in too far to dim the other light, it's awesome and I can't wait to buy more lights to daisy 4 together👍. I would recommend this light to everyone that grows with leds and have trouble with temperatures getting too high. Even if you grow with HPS lights I think any mars hydro light is a MUST TRY. I like how heavy both lights are because I know it means they are built soild and strong 💪. Very good sign with the frost they are starting to get thanks to bith mars hydro lights. I can notice more frost under the fc4800 and I'm thinking it's from the UV DIODES they put on the fc4800 👍. 2 days ago they all smelt like my nuken, sweet marshmallows. But now I can smell the monkey dough and gorilla glue and skunk monkey coming through👍. I touched a bud on the gorilla and monkey fingers smelt like fruit loops👍 really pleasant smell. Lingered on my fingers for atleast 30 min. I'm glad mars hydro is under priced compared to some brands and for how popular they are. usually companies would charge more. Thanks mars you guys are awesome 🤘🥁🎸. I'm getting a new exhaust fan soon. An 8 inch that will work alot better than my 4 inch lol. Wayyy to small for a 8x8 Grow Tent. Dehumidifier is going almost non stop to try and get the humidity down. I love how both lights on 100% power only raise my temperature 2 or 3 degrees 👍. You can rest your hand on the lights and not much heat comes off them. Obviously there is some heat but for the brightness of the lights and only raising the temp that much is awesome 👌.  And if I wanted to I could remove the driver from the fc4800 and run it on the outside of my tent because the cord is so long but 2 or 3 degrees is barely nothing👍. The girls are starting to bulk up abit now and only 3 weeks of flowering, these lights are awesome 👌.  My last run of monkey dough and gorilla glue didn't start showing alot of crystals until week 4. These were only 2.5 weeks and I started noticing some frost. Next week I will be able to tell more about what these custom bred seeds will be like. I love how the smell is changing now. Didn't want all them to smell like nuken marshmallows lol. It's awesome that I can get right inside the tent to do any work i need👍. Even if I wanted an 4x8 tent. I'd rather this 8x8 because it's so easy to work with the plants and have so much room to move around and massive headroom when I'm in there chillin with the gals🤣🤘. FOR EVERYTHING MARS HYDRO VISIT: Www.mars-hydro.com PROMO CODE: rocknroll Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍  

Still going...sigh... 3/18 ; did a water change and man is ut getting awkward getting her out of the tent to do water changes. I might drill and put a valve on the very bottom of the bucket next grow to make water changes a little easier in the future. 4 gallons of well water with 4 tsp of maxi grow and 1 tsp of Kool bloom. I added 1 tbl of calmag for the hell of it. The older leaves are looking a little stressed. The buds seem to be swelling to me, but strange enough, seems like the smell is decreasing. But what there is, is very fruity.ph to 6.1

They are looking real good. I think I may have gotten some nutrients on one plants leaves and it caused some yellowing and leaf curl, I’m hoping it straightens out.