Likes
Comments
Share
Aug 29th - entering week 4 of Flower for CloudWalker and rOOF95 - PurpsBerry enters week 9 of Flower. Looking at her today,!if this monsoon does not happen -Purps fed and she looks amazing. Possible flush next week. Samples to be taken this week for microscope assessment Sept 4th - last day of week 4 for rOOF95 and CloudWalker - PurpsBerry gets inspected today, could be close to Harvest for her
Likes
8
Share
Things are getting serious now!🔥 #2 has developed an insanely large main bud, absolutely packed with trichomes and giving off a super pungent aroma. 🌿 Meanwhile, #1 keeps stretching and is still the biggest plant in the tent. It continues to give off that stunning sweet, tropical scent, which is just unreal! Both plants seem to be moving fast—I have a feeling they might be ready in about two weeks. Let’s see how they finish up! 🤩
Likes
167
Share
@PapaNugs
Follow
Another good week. All is good! They are growing very well this run. I do have one girl that won't make it. Butinky the best one will go in this tent. We'll see! Watering twice a week. This is under the Medic Grow Mini-Sun-2. This 150w light is built for the 2x2. I've got it up at 24 inches right now. Based off how the girls look. Dimmed to 40% Here are the lights details: Medic Grow Mini Sun-2 150W LED Model: MN150-022 Spectrum mode: V1 Efficacy: 2.8 umol/J Thanks for stopping by! You can find the light on Grow Diaries: https://growdiaries.com/grow-lights/medic-grow/mini-sun-2-150-watts You can find the light on Medic Grow's website: https://medicgrow.com/
Likes
23
Share
@canongun
Follow
Day 36 - 42 So fun to see her little flowers!! Everyday they are becoming bigger and noticeable. I am keeping the nutrients same as past week. I hope she is happy!
Likes
17
Share
Germinación clásica en tupper con papel absorbente, solo agua de ósmosis inversa.. 48 horas y estuvieron listas!
Likes
23
Share
Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme. Rabattcode für den BIOTABS-Webshop https://biotabs.nl/en/shop/ GDBT420, damit erhalten Sie 15 Prozent
Likes
6
Share
Looks so beautiful and smells even better, so in love with this strain, has surprised me a lot, I would love to grow her again, very nice plant, maybe not the best in yield but quality is assured. 🤤💎🌱
Likes
34
Share
@AshBrand
Follow
11/24/21 - They look really good for how overgrown they are becoming. We need to move the light to the top of the tent soon. 11/25/21 - Still need to move the light to the top of the tent but all plants look reeeally good and are flowering. 11/26/21 - So far so good. They are drinking more water so we have increased feedings. Once the light gets moved to the top all plants will be getting sufficient light. 11/27/21 - We moved the light way up to the top and bumped the light to about 70% power. See today’s picture! 11/28/21 - The plants look amazing! Check out the video from today. Basically we are just letting the plants flower. Feeding as needed. 11/29/21 - The girls are doing great and are budding nicely. Huge flowers are opening up! 11/30/21 - Tomorrow will be the start of Week 3 of flower! We are so excited to have these plants and watching them go crazy in flower.
Likes
11
Share
Hello Diary, It finished the second week of flowering, a total of five weeks from the beginning of the vegetation. Apollo F1, although at the beginning of flowering, the tips of the branches are beautifully shaped into flowers, it develops really quickly. The leaves are really very thick, I hesitate to thin them out a bit, but I'm afraid of causing too much stress. Of all the three plants on the Farm, Apollo is the smallest. He is only 40 cm tall, but that's why he looks the most muscular. Here and there a yellowish leaf appears, which I immediately remove. This week I added supplements to both waterings. The first time I put the Easy Bloom Booster tablet in 7 liters of water and the second time I added Bio Flowering Booster. The conditions on the Farm are good, the humidity is lower than 50% while the temperature is around 27, 28 degrees. Here is a quick overview of the week: 30/05/2023 - Day 31. Watering. I added one Easy Bloom tablet to 7 liters of water and lowered the pH. on 6.0 I watered all three plants with that amount. 02/06/2023 - Day 34. Watering. This time I added all three components from the Bio Flowering Booster kit. I also watered all three plants in the Box with 7 liters of water. 03/06/2023 - Day 35. Photo shoot for the end of the 5th week. Apollo F1 - 39 cm That's it for this week. See you soon.
Likes
252
Share
💩Alrighty then Growmies We Are Back At it 💩 Well folks we just finished up the last run and so we are back to do it all over again 😁 So what do you say we have some fun 👈And what we got here folks is a Strawberry Blast 🍓 🍓 🍓 🍓 Strawberry 🍓 Gorilla , Strawberry 🍓 Banana 🍌 and there new release 🍓 Ztrawberriez 🍓 from FastBuds And we also got Strawberry 🍓 Cola from Exotic Seeds 👉 I had ruff time keeping the Humidity up so 8 had to boil water in conjunction with my Humidifier more work but it worked out 😮 So it's been a great week so far 👌 👉 So as you can 2 pots have 2 plants well one will be chopped , it's a survival of the fitest 👈 FC4800 from MarsHydro Lights being readjusted and chart updated .........👍I've added a RU45 to the mix 👍 www.marshydro.ca 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈
Likes
3
Share
Processing
Likes
8
Share
@Max1973
Follow
Day 35 - few pics and vids..... everything going along nicely 👍 This is a pretty big update, so i'll add to it over the next few days, as i finish building it all.... i'm building these 2 x SS haze, the full tent, just finishing up the setup..... trimming them, changing solutions to 12/12 and flower..... changed the exhaust fan and filter setup to the better outside the tent method.... and installed 12v CPU computer fan, lol ("alta9" fits in 4in ducting perfectly), drops wattage on extractor fan.... 10w tops... got a few kg of active carbon and making/replacing the carbon filter .... i'll add afew vids of the new setup in afew days... Day 36 - few pics/vid of new tent setup...... "alta 9" fan :) post tomorrow after i finish trimmin and settin up night mode etc...... and into tomorrow we go, lol ... Day 37.... slowly getting there..... little bit more to go... this should make things abit more interesting..... right tank (short babie) has : 19 lts of tap water @18oC + 150 ml -dutch master one gold FLOWER.... 6.4 PH - 1400 PPM left tank has : 19 lts of tap water @18oC + 50 ml of elements a and 50ml of b and 10 ml of nitro and 20ml of Crystalic (molasses/pot) .... 6.5 PH - 1200 PPM more pics / vids of the finished tent setup.... roots, transfer, etc... Day 37 is alot of vids of the clean and change to flower..... edit - day after build noticed left tank (nutrifield) not enough bubbles..... pulled out the 4 air pump and swapped to the 2 x original oxipumps... much better, also to fix the problem with ph goin high, and bubbles not stirin the mix, was to add another 10ml of crystallic and another 5ml of nitro... then pumped both tanks with ph down and set em to 5.8-6.2 - both plants have fully recovered from the big trim, and bounced back within 12-24hrs, post pics/vid in abit..... Day 39 - made a freaky video... was curious about what the plants would see looking up at the lights... the lights and buzzing of air compressors and bubbling tank water, and dazzling lights turned out pretty cool in vid editor, was in selfie mode.... and final vid of the bounceback from trim :) 👍😎
Likes
51
Share
12/30/23 - Day 54 - Hello All! I started this week a day early. I wanted to update everyone on something I have been thinking about a lot. Curing. I feel if there was a hole in my growing skills it would be curing. Last grow there was more than I had anticipated. I was not set up for curing 1 lb. I threw in an audible at the last minute. It worked out but I know I can improve with some trial and error and hands-on experience. So after reading a ton, and going off of some of my prior builds for drying, I came up with this design. I have a controller that will turn the air on and will run when the contents inside the box hit whatever RH% I want to set it at. I think the first week I will set it for 78%RH, then every couple of days go down a % until I hit 62%. The thought is that if the bucket gets above the set RH% then the air will kick on and distribute air across the buds until the RH% is back down to where you want it. It will force the humidity out. I won't need to worry about burping. It will happen on its own.... in theory. Ill update tomorrow with some pictures after the water change. 12/31/23 - Day 55 - Everything is looking good. The water change completed this morning while I was in the shower. Its adding nutes now and will do so over the next hour or so. She is starting to get stinky. I had to add the extra carbon filter to the room. I've got some pics up top of that. Happy New Year! Next time I post it will be in 2024! Have a great night and be safe! Dont drink and drive, your life and anyone else involved in an accident is too important! C' YA! 1/4/24 - Day 58 - I have been thinking of trimming her for a while.... I got a comment on the bushy-ness and I got self-conscious and gave her a trim. Lol I have been going bath and forth for a while and that gave me the push to give her a little trim. She looks great and is growing really quickly. Ill update with more pics as it goes along.
Likes
8
Share
FC-E 4800 lamp , to view this lamp or any other marshydro product go to: https://instagram.com/marshydro_aliexpress?igshid=YmMyMTA2M2Y=
Likes
44
Share
Hello fellow growers! 🌱 Despite a few bumps along the way, I'm thrilled to share that my contest journey is officially underway. After some delivery hiccups with the controller, the third attempt was the charm – it finally made it to my doorstep! 🚚💨 The initial excitement hit a snag when I faced issues connecting the controller. 🤔 Thankfully, the fantastic support team guided me through the troubleshooting process, and voila! 🛠️ My controller is now up and running smoothly. As I eagerly await the next stages, I haven't ventured into using the light adapter just yet. Stay tuned for updates on my growing adventure! 🌿
Likes
37
Share